Skip to contentSkip to conversation

making an ide hd sleep

DISCUSSION Marcelo Borges Ribeiro 5 participants 5 messages Dec 6, 2001 – Dec 8, 2001

lore
Share & tools
lore
#0 lore raw

Hi, I´d like to know if it's possible to put an ide hd to sleep after (for example) 15 min. idle (i don´t know if an hd under linux stays idle that amount of time. ). I tried mount -o noatime and hdparm -S 150 /dev/hda, but it seems that when it sleeps it starts working after a few seconds (when it sleeps!). Is there a way to have this feature under linux?

Thanks in advance,
Marcelo Ribeiro

#1 lore raw
Quoted 6 lines · Marcelo Borges Ribeiro

Hi, I´d like to know if it's possible to put an ide hd to sleep after (for example) 15 min. idle (i don´t know if an hd under linux stays idle that amount of time. ). I tried mount -o noatime and hdparm -S 150 /dev/hda, but it seems that when it sleeps it starts working after a few seconds (when it sleeps!). Is there a way to have this feature under linux?

man hdparm

Signature · 5 lines
José Luis Domingo López
Linux Registered User #189436     Debian Linux Woody (P166 64 MB RAM)
 
jdomingo EN internautas PUNTO org  => ¿ Spam ? Atente a las consecuencias
jdomingo AT internautas DOT   org  => Spam at your own risk
#2 lore raw
In reply to Marcelo Borges Ribeiro
Quoted 6 lines · Marcelo Borges Ribeiro

Hi, I´d like to know if it's possible to put an ide hd to sleep after (for example) 15 min. idle (i don´t know if an hd under linux stays idle that amount of time. ). I tried mount -o noatime and hdparm -S 150 /dev/hda, but it seems that when it sleeps it starts working after a few seconds (when it sleeps!). Is there a way to have this feature under linux?

This is more difficult that it sounds. Section 4 of the Battery-Powered mini HOWTO (which is a bit out of date) has some useful advice. You are doing it right...but something is touching the filesystem (or swap) on the drive. It would be nice if there would be some way of enabling logging to say what process touched the filesystem. Of course the logging itself would touch the filesystem (on a laptop :)).

http://www.linuxdoc.org/HOWTO/mini/Battery-Powered-4.html

-todd

#3 lore raw
In reply to Marcelo Borges Ribeiro
Quoted 5 lines · Marcelo Borges Ribeiro

Hi, I´d like to know if it's possible to put an ide hd to sleep after (for example) 15 min. idle (i don´t know if an hd under linux stays idle that amount of time. ). I tried mount -o noatime and hdparm -S 150 /dev/hda, but it seems that when it sleeps it starts working after a few seconds (when it sleeps!). Is there a way to have this feature under linux?

When your /var is located somewhere on /dev/hdaX probably not. My syslog makes

disc access every few seconds (strangely even without writing something..) Disabling syslog might help, but that isn't an issue. So my drive wake up immediately after went to sleep. But for other drives there

should be no problem.

*Kristian

#4 lore raw
In reply to Marcelo Borges Ribeiro

Hi!

Quoted 5 lines

Hi, I´d like to know if it's possible to put an ide hd to sleep after (for example) 15 min. idle (i don´t know if an hd under linux stays idle that amount of time. ). I tried mount -o noatime and hdparm -S 150 /dev/hda, but it seems that when it sleeps it starts working after a few seconds (when it sleeps!). Is there a way to have this feature under linux?

Get noflushd (see freshmeat). Its more clever than hdparm -S.
Pavel

Signature · 2 lines
"I do not steal MS software. It is not worth it."
                                -- Pavel Kankovsky