making an ide hd sleep
Hi, I´d like to know if it's possible to put an ide hd to sleep after (for example) 15 min. idle (i don´t know if an hd under linux stays idle that amount of time. ). I tried mount -o noatime and hdparm -S 150 /dev/hda, but it seems that when it sleeps it starts working after a few seconds (when it sleeps!). Is there a way to have this feature under linux?
Thanks in advance,
Marcelo Ribeiro
Quoted 6 lines · Marcelo Borges Ribeiro
Hi, I´d like to know if it's possible to put an ide hd to sleep after (for example) 15 min. idle (i don´t know if an hd under linux stays idle that amount of time. ). I tried mount -o noatime and hdparm -S 150
/dev/hda, but it seems that when it sleeps it starts working after a few seconds (when it sleeps!). Is there a way to have this feature under linux?
man hdparm
Signature · 5 lines
José Luis Domingo López Linux Registered User #189436 Debian Linux Woody (P166 64 MB RAM) jdomingo EN internautas PUNTO org => ¿ Spam ? Atente a las consecuencias jdomingo AT internautas DOT org => Spam at your own risk
Quoted 6 lines · Marcelo Borges Ribeiro
Hi, I´d like to know if it's possible to put an ide hd to sleep after (for example) 15 min. idle (i don´t know if an hd under linux stays idle that amount of time. ). I tried mount -o noatime and hdparm -S 150
/dev/hda, but it seems that when it sleeps it starts working after a few seconds (when it sleeps!). Is there a way to have this feature under linux?
This is more difficult that it sounds. Section 4 of the Battery-Powered mini HOWTO (which is a bit out of date) has some useful advice. You are doing it right...but something is touching the filesystem (or swap) on the drive. It would be nice if there would be some way of enabling logging to say what process touched the filesystem. Of course the logging itself would touch the filesystem (on a laptop :)).
http://www.linuxdoc.org/HOWTO/mini/Battery-Powered-4.html
-todd
Quoted 5 lines · Marcelo Borges Ribeiro
Hi, I´d like to know if it's possible to put an ide hd to sleep after (for example) 15 min. idle (i don´t know if an hd under linux stays idle that amount of time. ). I tried mount -o noatime and hdparm -S 150
/dev/hda, but it seems that when it sleeps it starts working after a few seconds (when it sleeps!). Is there a way to have this feature under linux?
When your /var is located somewhere on /dev/hdaX probably not. My syslog makes
disc access every few seconds (strangely even without writing something..) Disabling syslog might help, but that isn't an issue. So my drive wake up immediately after went to sleep. But for other drives there
should be no problem.
*Kristian
Hi!
Quoted 5 lines
Hi, I´d like to know if it's possible to put an ide hd to sleep after (for example) 15 min. idle (i don´t know if an hd under linux stays idle that amount of time. ). I tried mount -o noatime and hdparm -S 150
/dev/hda, but it seems that when it sleeps it starts working after a few seconds (when it sleeps!). Is there a way to have this feature under linux?
Get noflushd (see freshmeat). Its more clever than hdparm -S.
Pavel
Signature · 2 lines
"I do not steal MS software. It is not worth it."
-- Pavel Kankovsky