2.5.1-pre11 de2104X tulip driver problem
Just a tulip driver bug report:
i'm one of those dinosaurs using a 10base2 network and really old DLink-530 21040 and 21041 based ethercards.
This is what a recent kernel version (2.5.1-pre10) working tulip driver prints out when booting up:
kernel: tulip0: 21041 Media table, default media 0800 (Autosense).
kernel: tulip0: 21041 media #0, 10baseT.
kernel: tulip0: 21041 media #4, 10baseT-FDX.
kernel: tulip0: 21041 media #1, 10base2.
[...]
kernel: eth0: Digital DC21041 Tulip rev 17 at 0xe0800f80, 21041 mode, 00:80:C8:3E:D0:BC, IRQ 12. [...]
kernel: eth0: No 21041 10baseT link beat, Media switched to AUI.
Card still works on my 10base2 network even tho i haven't got an AUI port on the ethercard.
======================================================================
This is what the non working 2.5.1-pre11 tulip driver prints out:
kernel: de2104x PCI Ethernet driver v0.5.1 (Nov 20, 2001)
kernel: de0: SROM-listed ports: TP
kernel: eth0: 21041 at 0xe0800f80, 00:80:c8:3e:d0:bc, IRQ 12
[...]
kernel: eth0: set link 10baseT auto, mode 7ffc0040, sia 10c4,ffffef01,ffffffff,ffff0008
kernel: set mode 7ffc0000, set sia ef01,ffff,8
====================================================================
regards,
b <[email protected]>
Quoted 23 lines · "really [email protected]" <[email protected]> writes:
Just a tulip driver bug report:
i'm one of those dinosaurs using a 10base2 network and really old DLink-530 21040 and 21041 based ethercards.
This is what a recent kernel version (2.5.1-pre10) working tulip driver prints out when booting up:
kernel: tulip0: 21041 Media table, default media 0800 (Autosense).
kernel: tulip0: 21041 media #0, 10baseT.
kernel: tulip0: 21041 media #4, 10baseT-FDX.
kernel: tulip0: 21041 media #1, 10base2.
[...]
kernel: eth0: Digital DC21041 Tulip rev 17 at0xe0800f80, 21041 mode, 00:80:C8:3E:D0:BC, IRQ 12. [...]
kernel: eth0: No 21041 10baseT link beat, Media switched to AUI.Card still works on my 10base2 network even tho i haven't got an AUI port on the ethercard.
======================================================================This is what the non working 2.5.1-pre11 tulip driver prints out:
Quoted 8 lines
kernel: de2104x PCI Ethernet driver v0.5.1 (Nov 20, 2001)
kernel: de0: SROM-listed ports: TP
kernel: eth0: 21041 at0xe0800f80, 00:80:c8:3e:d0:bc, IRQ 12
[...]
kernel: eth0: set link 10baseT auto, mode7ffc0040, sia 10c4,ffffef01,ffffffff,ffff0008
kernel: set mode7ffc0000, set sia ef01,ffff,8====================================================================
i have a DEC DE450 (based on 21041 AA chipset). i guess, for 2104[01], tulip driver has been broken since 2.4.4 (yes, that's over six months of brokeness). yes, jeff garzik knows about it. i've emailed the list and sourceforge &c.
rememdies --
0) buy a new network card.
1) use the de4x5 driver instead.
2) use the older tulip driver 0.9.14. download it from
http://sourceforge.net/projects/tulip/
if you go with 2, just download. have /usr/src/linux be your linux source (or a symlink to them). go into tulip-0.9.14/src, make dep, make. then copy tulip.o into /lib/modules/2.[45].X/kernel/drivers/net/tulip which replaces the kernels one.
best of luck.
Signature · 2 lines
J o h a n K u l l s t a m [[email protected]]
Quoted 4 lines · Johan Kullstam
i have a DEC DE450 (based on 21041 AA chipset). i guess, for 2104[01], tulip driver has been broken since 2.4.4 (yes, that's over six months of brokeness). yes, jeff garzik knows about it. i've emailed the list and sourceforge &c.
This is a bug report for de2104x not tulip. de2104x was created to fix the 2104x problems in tulip, which is getting really hairy to maintain.
Jeff
Signature · 3 lines
Jeff Garzik | Only so many songs can be sung Building 1024 | with two lips, two lungs, and one tongue. MandrakeSoft | - nomeansno
Quoted 2 lines · "really [email protected]" wrote:
i'm one of those dinosaurs using a 10base2 network and really old DLink-530 21040 and 21041 based ethercards.
[...]
Quoted 1 line
kernel: de0: SROM-listed ports: TP
Thanks for the report. If you are using 10base2 that's definitely a bug.
Can you please change DE_DEF_MSG_ENABLE in de2104x.c as shown below, and [privately] e-mail me /bin/dmesg and "lspci -vvv" output?
-#define DE_DEF_MSG_ENABLE (NETIF_MSG_DRV | \ - NETIF_MSG_PROBE | \ - NETIF_MSG_LINK | \ - NETIF_MSG_TIMER | \ - NETIF_MSG_IFDOWN | \ - NETIF_MSG_IFUP | \ - NETIF_MSG_RX_ERR | \
- NETIF_MSG_TX_ERR)
+#define DE_DEF_MSG_ENABLE 0xffffffff
Signature · 3 lines
Jeff Garzik | Only so many songs can be sung Building 1024 | with two lips, two lungs, and one tongue. MandrakeSoft | - nomeansno
Quoted 9 lines · Jeff Garzik
Quoted 4 lines · Johan Kullstam
i have a DEC DE450 (based on 21041 AA chipset). i guess, for 2104[01], tulip driver has been broken since 2.4.4 (yes, that's over six months of brokeness). yes, jeff garzik knows about it. i've emailed the list and sourceforge &c.
This is a bug report for de2104x not tulip. de2104x was created to fix the 2104x problems in tulip, which is getting really hairy to maintain.
ah ok. sorry to crap on you. i guess the proliferation of tulip clones is getting pretty crazy.
i got a switch over the weekend. my DE500 (DEC 21140AB w/o MII) wouldn't negotiate full-duplex. i finally just broke down and scrapped my tulips and put in a 3com905b instead.
Signature · 2 lines
J o h a n K u l l s t a m [[email protected]]