Skip to contentSkip to conversation

2.5.1-pre11 de2104X tulip driver problem

DISCUSSION really [email protected] 3 participants 5 messages Dec 13, 2001 – Dec 14, 2001

lore
Share & tools
lore
#0 lore raw

Just a tulip driver bug report:

i'm one of those dinosaurs using a 10base2 network and really old DLink-530 21040 and 21041 based ethercards.

This is what a recent kernel version (2.5.1-pre10) working tulip driver prints out when booting up:

kernel: tulip0: 21041 Media table, default media 0800 (Autosense).
kernel: tulip0: 21041 media #0, 10baseT.
kernel: tulip0: 21041 media #4, 10baseT-FDX.
kernel: tulip0: 21041 media #1, 10base2.
[...]
kernel: eth0: Digital DC21041 Tulip rev 17 at 0xe0800f80, 21041 mode, 00:80:C8:3E:D0:BC, IRQ 12. [...]
kernel: eth0: No 21041 10baseT link beat, Media switched to AUI.

Card still works on my 10base2 network even tho i haven't got an AUI port on the ethercard.
======================================================================

This is what the non working 2.5.1-pre11 tulip driver prints out:

kernel: de2104x PCI Ethernet driver v0.5.1 (Nov 20, 2001)
kernel: de0: SROM-listed ports: TP
kernel: eth0: 21041 at 0xe0800f80, 00:80:c8:3e:d0:bc, IRQ 12
[...]
kernel: eth0: set link 10baseT auto, mode 7ffc0040, sia 10c4,ffffef01,ffffffff,ffff0008
kernel: set mode 7ffc0000, set sia ef01,ffff,8

====================================================================

regards,
b <[email protected]>

#1 lore raw
Quoted 23 lines · "really [email protected]" <[email protected]> writes:

Just a tulip driver bug report:

i'm one of those dinosaurs using a 10base2 network and really old DLink-530 21040 and 21041 based ethercards.

This is what a recent kernel version (2.5.1-pre10) working tulip driver prints out when booting up:

kernel: tulip0: 21041 Media table, default media 0800 (Autosense).
kernel: tulip0: 21041 media #0, 10baseT.
kernel: tulip0: 21041 media #4, 10baseT-FDX.
kernel: tulip0: 21041 media #1, 10base2.
[...]
kernel: eth0: Digital DC21041 Tulip rev 17 at 0xe0800f80, 21041 mode, 00:80:C8:3E:D0:BC, IRQ 12. [...]
kernel: eth0: No 21041 10baseT link beat, Media switched to AUI.

Card still works on my 10base2 network even tho i haven't got an AUI port on the ethercard.
======================================================================

This is what the non working 2.5.1-pre11 tulip driver prints out:

Quoted 8 lines

kernel: de2104x PCI Ethernet driver v0.5.1 (Nov 20, 2001)
kernel: de0: SROM-listed ports: TP
kernel: eth0: 21041 at 0xe0800f80, 00:80:c8:3e:d0:bc, IRQ 12
[...]
kernel: eth0: set link 10baseT auto, mode 7ffc0040, sia 10c4,ffffef01,ffffffff,ffff0008
kernel: set mode 7ffc0000, set sia ef01,ffff,8

====================================================================

i have a DEC DE450 (based on 21041 AA chipset). i guess, for 2104[01], tulip driver has been broken since 2.4.4 (yes, that's over six months of brokeness). yes, jeff garzik knows about it. i've emailed the list and sourceforge &c.

rememdies --

0) buy a new network card.

1) use the de4x5 driver instead.

2) use the older tulip driver 0.9.14. download it from
http://sourceforge.net/projects/tulip/

if you go with 2, just download. have /usr/src/linux be your linux source (or a symlink to them). go into tulip-0.9.14/src, make dep, make. then copy tulip.o into /lib/modules/2.[45].X/kernel/drivers/net/tulip which replaces the kernels one.

best of luck.

Signature · 2 lines
J o h a n  K u l l s t a m
[[email protected]]
#2 lore raw
In reply to really [email protected]
Quoted 4 lines · Johan Kullstam

i have a DEC DE450 (based on 21041 AA chipset). i guess, for 2104[01], tulip driver has been broken since 2.4.4 (yes, that's over six months of brokeness). yes, jeff garzik knows about it. i've emailed the list and sourceforge &c.

This is a bug report for de2104x not tulip. de2104x was created to fix the 2104x problems in tulip, which is getting really hairy to maintain.

Jeff

Signature · 3 lines
Jeff Garzik      | Only so many songs can be sung
Building 1024    | with two lips, two lungs, and one tongue.
MandrakeSoft     |         - nomeansno
#3 lore raw
In reply to really [email protected]
Quoted 2 lines · "really [email protected]" wrote:

i'm one of those dinosaurs using a 10base2 network and really old DLink-530 21040 and 21041 based ethercards.

[...]

Quoted 1 line

kernel: de0: SROM-listed ports: TP

Thanks for the report. If you are using 10base2 that's definitely a bug.

Can you please change DE_DEF_MSG_ENABLE in de2104x.c as shown below, and [privately] e-mail me /bin/dmesg and "lspci -vvv" output?

-#define DE_DEF_MSG_ENABLE       (NETIF_MSG_DRV          | \
-                                 NETIF_MSG_PROBE        | \
-                                 NETIF_MSG_LINK         | \
-                                 NETIF_MSG_TIMER        | \
-                                 NETIF_MSG_IFDOWN       | \
-                                 NETIF_MSG_IFUP         | \
-                                 NETIF_MSG_RX_ERR       | \

- NETIF_MSG_TX_ERR)
+#define DE_DEF_MSG_ENABLE 0xffffffff

Signature · 3 lines
Jeff Garzik      | Only so many songs can be sung
Building 1024    | with two lips, two lungs, and one tongue.
MandrakeSoft     |         - nomeansno
#4 lore raw
In reply to really [email protected]
Quoted 9 lines · Jeff Garzik
Quoted 4 lines · Johan Kullstam

i have a DEC DE450 (based on 21041 AA chipset). i guess, for 2104[01], tulip driver has been broken since 2.4.4 (yes, that's over six months of brokeness). yes, jeff garzik knows about it. i've emailed the list and sourceforge &c.

This is a bug report for de2104x not tulip. de2104x was created to fix the 2104x problems in tulip, which is getting really hairy to maintain.

ah ok. sorry to crap on you. i guess the proliferation of tulip clones is getting pretty crazy.

i got a switch over the weekend. my DE500 (DEC 21140AB w/o MII) wouldn't negotiate full-duplex. i finally just broke down and scrapped my tulips and put in a 3com905b instead.

Signature · 2 lines
J o h a n  K u l l s t a m
[[email protected]]