Skip to contentSkip to conversation

sound

DISCUSSION philippe 4 participants 4 messages Jun 24, 2002 – Jun 25, 2002

lore
Share & tools
lore

philippe

author
#0 lore raw

hi
I am new on this list and my name is Philippe.
I used to make some programs on windows but wanted to trye on linux. I have a problem with a small prog i had done for windows witch play sounds on the fm chip of a sound card.
But when i translate it on linux, it doesn't work any more. It compile and link correctly(nasm), but on execution it writes:
segmentation fault!
I post you the sources at the end of this message.

I had an other question:
Where can I find bible of all the interruptions and what is the name of it?

Philippe

;************************************************
;* Ecriture sur SoundBlaster *
;*1-ecrire dans le adresse port0x388 *
;*2-attendre 12 cycles *
;*3-ecrire dans le data port0x389 *
;*4-attendre 84 cycles *

;compiler:
; nasm -f elf SBB.asm
; ld -s -o SBB SBB.o

section .text ;section declaration

;we must export the entry point to the ELF
linker or
global _start ;loader. They conventionally recognize _start as
their
;entry point. Use ld -e foo to override the
default.

_start:

;mettre tous les registres SB a zero

	mov edx,0x388	;port adresse
	mov eax,0x20		;registre sb 20
	out dx,al
	mov edx,0x389	;data port
	mov al,7
	out dx,al

mov edx,0x388 ;port adresse
mov al,0x40 ;registre sb 40
out dx,al

	;call WaitR
	mov edx,0x389	;data port
	mov al,0x10
	out dx,al
	;call WaitR

mov edx,0x388 ;port adresse
mov al,0x60 ;registre sb 20
out dx,al

	;call WaitR
	mov edx,0x389	;data port
	mov eax,0xf0
	out dx,al
	;call WaitR

	mov edx,0x388	;port adresse
	mov al,0x80		;registre sb 20
	out dx,al
	mov edx,0x389	;data port
	mov al,70
	out dx,al

mov edx,0x388 ;port adresse
mov al,0x23 ;registre sb 20
out dx,al

	;call WaitR
	mov edx,0x389	;data port
	mov eax,1
	out dx,al
	;call WaitR

mov edx,0x388 ;port adresse
mov eax,0x43 ;registre sb 20
out dx,al

	;call WaitR
	mov edx,0x389	;data port
	mov eax,00
	out dx,al
	;call WaitR

mov edx,0x388 ;port adresse
mov eax,0x63 ;registre sb 20
out dx,al

	;call WaitR
	mov edx,0x389	;data port
	mov eax,0xf0
	out dx,al
	;call WaitR

mov edx,0x388 ;port adresse
mov eax,0x83 ;registre sb 20
out dx,al

	;call WaitR
	mov edx,0x389	;data port
	mov eax,0x7f
	out dx,al
dest3:
	mov cx,0xff

dest2:

	mov edx,0x388	;port adresse
	mov al,0xa0		;frequency
	out dx,al
	mov edx,0x389	;data port
	mov al,cl
	xor al,dl
	out dx,al
;**send the sound now gogogogo go
	mov edx,0x388	;port adresse
	mov eax,0xb0	;registre sb 20
	out dx,al
	mov edx,0x389	;data port
	mov eax,0x31
	out dx,al
	call Waitc
	call Waitc
	call Waitc
	call Waitc

	loop dest2

;*******************************************************

mov edx,0x388 ;port adresse
mov eax,0xb0 ;registre sb 20
out dx,al

	;CHK:	;attend qu'on appuye sur la touche espace*****

	;mov ah,8
	;mov dl,0xFF
	;int 0x21
	;cmp al,' '	;espace
	;je SUITE
	;jmp CHK
;SUITE:
	mov edx,0x389	;data port
	mov eax,0
	out dx,al

;mov ax,0x4c
;int 0x21

        mov     ebx,0   ;first syscall argument: exit code
        mov     eax,1   ;system call number (sys_exit)
        int     0x80    ;call kerne

Waitc:

	push ecx
	mov ecx,0x8fff

W1:
nop
loop W1
pop ecx
ret
Waitb:

	push ecx
	mov ecx,0x1fff

W2:
nop
loop W2
pop ecx
ret

#1 lore raw
Quoted 183 lines · philippe

hi
I am new on this list and my name is Philippe.
I used to make some programs on windows but wanted to trye on linux. I have a problem with a small prog i had done for windows witch play sounds on the fm chip of a sound card.
But when i translate it on linux, it doesn't work any more. It compile and link correctly(nasm), but on execution it writes:
segmentation fault!
I post you the sources at the end of this message.

I had an other question:
Where can I find bible of all the interruptions and what is the name of it?

Philippe

;************************************************
;* Ecriture sur SoundBlaster *
;*1-ecrire dans le adresse port0x388 *
;*2-attendre 12 cycles *
;*3-ecrire dans le data port0x389 *
;*4-attendre 84 cycles *

;compiler:
; nasm -f elf SBB.asm
; ld -s -o SBB SBB.o

section .text ;section declaration

;we must export the entry point to the ELF
linker or
global _start ;loader. They conventionally recognize _start as
their
;entry point. Use ld -e foo to override the
default.

_start:

;mettre tous les registres SB a zero

	mov edx,0x388	;port adresse
	mov eax,0x20		;registre sb 20
	out dx,al
	mov edx,0x389	;data port
	mov al,7
	out dx,al

mov edx,0x388 ;port adresse
mov al,0x40 ;registre sb 40
out dx,al

	;call WaitR
	mov edx,0x389	;data port
	mov al,0x10
	out dx,al
	;call WaitR

mov edx,0x388 ;port adresse
mov al,0x60 ;registre sb 20
out dx,al

	;call WaitR
	mov edx,0x389	;data port
	mov eax,0xf0
	out dx,al
	;call WaitR

	mov edx,0x388	;port adresse
	mov al,0x80		;registre sb 20
	out dx,al
	mov edx,0x389	;data port
	mov al,70
	out dx,al

mov edx,0x388 ;port adresse
mov al,0x23 ;registre sb 20
out dx,al

	;call WaitR
	mov edx,0x389	;data port
	mov eax,1
	out dx,al
	;call WaitR

mov edx,0x388 ;port adresse
mov eax,0x43 ;registre sb 20
out dx,al

	;call WaitR
	mov edx,0x389	;data port
	mov eax,00
	out dx,al
	;call WaitR

mov edx,0x388 ;port adresse
mov eax,0x63 ;registre sb 20
out dx,al

	;call WaitR
	mov edx,0x389	;data port
	mov eax,0xf0
	out dx,al
	;call WaitR

mov edx,0x388 ;port adresse
mov eax,0x83 ;registre sb 20
out dx,al

	;call WaitR
	mov edx,0x389	;data port
	mov eax,0x7f
	out dx,al
dest3:
	mov cx,0xff

dest2:

	mov edx,0x388	;port adresse
	mov al,0xa0		;frequency
	out dx,al
	mov edx,0x389	;data port
	mov al,cl
	xor al,dl
	out dx,al
;**send the sound now gogogogo go
	mov edx,0x388	;port adresse
	mov eax,0xb0	;registre sb 20
	out dx,al
	mov edx,0x389	;data port
	mov eax,0x31
	out dx,al
	call Waitc
	call Waitc
	call Waitc
	call Waitc

	loop dest2

;*******************************************************

mov edx,0x388 ;port adresse
mov eax,0xb0 ;registre sb 20
out dx,al

	;CHK:	;attend qu'on appuye sur la touche espace*****

	;mov ah,8
	;mov dl,0xFF
	;int 0x21
	;cmp al,' '	;espace
	;je SUITE
	;jmp CHK
;SUITE:
	mov edx,0x389	;data port
	mov eax,0
	out dx,al

;mov ax,0x4c
;int 0x21

        mov     ebx,0   ;first syscall argument: exit code
        mov     eax,1   ;system call number (sys_exit)
        int     0x80    ;call kerne

Waitc:

	push ecx
	mov ecx,0x8fff

W1:
nop
loop W1
pop ecx
ret
Waitb:

	push ecx
	mov ecx,0x1fff

W2:
nop
loop W2
pop ecx
ret
-
To unsubscribe from this list: send the line "unsubscribe linux-assembly" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#2 lore raw
In reply to philippe
Quoted 5 lines · philippe

Date: Mon, 24 Jun 2002 23:51:11 +0200
From: philippe <[email protected]>
To: [email protected]
Subject: sound

Quoted 8 lines

hi
I am new on this list and my name is Philippe.
I used to make some programs on windows but wanted to trye on linux. I have a problem with a small prog i had done for windows witch play sounds on the fm chip of a sound card.
But when i translate it on linux, it doesn't work any more. It compile and link correctly(nasm), but on execution it writes:
segmentation fault!

Maybe You have no permission to write to that ports. Use io_perm syscall to set it.

Also this king of programming is not good choice for linux. Use kernel to do the dirty work. You can use a "services" (ioctls) of sound driver to produce sound. I think there is an tutorial on www.linuxassembly.org for a sound too.

Quoted 5 lines

I post you the sources at the end of this message.

I had an other question:
Where can I find bible of all the interruptions and what is the name of it?

It is called Ralf's Brown Inetrrupt list.
Use google.com to find it (it was on Simtelnet mirrors)

Regards

Rudolf

Quoted 172 lines

Philippe

;************************************************
;* Ecriture sur SoundBlaster *
;*1-ecrire dans le adresse port0x388 *
;*2-attendre 12 cycles *
;*3-ecrire dans le data port0x389 *
;*4-attendre 84 cycles *

;compiler:
; nasm -f elf SBB.asm
; ld -s -o SBB SBB.o

section .text ;section declaration

;we must export the entry point to the ELF
linker or
global _start ;loader. They conventionally recognize _start as
their
;entry point. Use ld -e foo to override the
default.

_start:

;mettre tous les registres SB a zero

	mov edx,0x388	;port adresse
	mov eax,0x20		;registre sb 20
	out dx,al
	mov edx,0x389	;data port
	mov al,7
	out dx,al

mov edx,0x388 ;port adresse
mov al,0x40 ;registre sb 40
out dx,al

	;call WaitR
	mov edx,0x389	;data port
	mov al,0x10
	out dx,al
	;call WaitR

mov edx,0x388 ;port adresse
mov al,0x60 ;registre sb 20
out dx,al

	;call WaitR
	mov edx,0x389	;data port
	mov eax,0xf0
	out dx,al
	;call WaitR

	mov edx,0x388	;port adresse
	mov al,0x80		;registre sb 20
	out dx,al
	mov edx,0x389	;data port
	mov al,70
	out dx,al

mov edx,0x388 ;port adresse
mov al,0x23 ;registre sb 20
out dx,al

	;call WaitR
	mov edx,0x389	;data port
	mov eax,1
	out dx,al
	;call WaitR

mov edx,0x388 ;port adresse
mov eax,0x43 ;registre sb 20
out dx,al

	;call WaitR
	mov edx,0x389	;data port
	mov eax,00
	out dx,al
	;call WaitR

mov edx,0x388 ;port adresse
mov eax,0x63 ;registre sb 20
out dx,al

	;call WaitR
	mov edx,0x389	;data port
	mov eax,0xf0
	out dx,al
	;call WaitR

mov edx,0x388 ;port adresse
mov eax,0x83 ;registre sb 20
out dx,al

	;call WaitR
	mov edx,0x389	;data port
	mov eax,0x7f
	out dx,al
dest3:
	mov cx,0xff

dest2:

	mov edx,0x388	;port adresse
	mov al,0xa0		;frequency
	out dx,al
	mov edx,0x389	;data port
	mov al,cl
	xor al,dl
	out dx,al
;**send the sound now gogogogo go
	mov edx,0x388	;port adresse
	mov eax,0xb0	;registre sb 20
	out dx,al
	mov edx,0x389	;data port
	mov eax,0x31
	out dx,al
	call Waitc
	call Waitc
	call Waitc
	call Waitc

	loop dest2

;*******************************************************

mov edx,0x388 ;port adresse
mov eax,0xb0 ;registre sb 20
out dx,al

	;CHK:	;attend qu'on appuye sur la touche espace*****

	;mov ah,8
	;mov dl,0xFF
	;int 0x21
	;cmp al,' '	;espace
	;je SUITE
	;jmp CHK
;SUITE:
	mov edx,0x389	;data port
	mov eax,0
	out dx,al

;mov ax,0x4c
;int 0x21

        mov     ebx,0   ;first syscall argument: exit code
        mov     eax,1   ;system call number (sys_exit)
        int     0x80    ;call kerne

Waitc:

	push ecx
	mov ecx,0x8fff

W1:
nop
loop W1
pop ecx
ret
Waitb:

	push ecx
	mov ecx,0x1fff

W2:
nop
loop W2
pop ecx
ret
-
To unsubscribe from this list: send the line "unsubscribe linux-assembly" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#3 lore raw
In reply to philippe
Quoted 5 lines · On Mon, 24 Jun 2002 23:51:11 +0200 philippe <[email protected]> wrote:

hi
I am new on this list and my name is Philippe.
I used to make some programs on windows but wanted to trye on linux. I have a problem with a small prog i had done for windows witch play sounds on the fm chip of a sound card.

direct port access requires 'root' rights and the concerning ports being enabled, with sys_ioctl or sys_ioperm. - e.g <man 2 ioctl>

Quoted 8 lines

But when i translate it on linux, it doesn't work any more. It compile and link correctly(nasm), but on execution it writes:
segmentation fault!
I post you the sources at the end of this message.

I had an other question:
Where can I find bible of all the interruptions and what is the name of it?

basically, there is one interrupt and several sub-codes, passed w. eax. 'the' bible doesn't exist, linux is in a somewhat 'fluid' state and, badly documented. Paricularly no aequivalent to 'RBIL' but, you might get some help from my syscall pages where i collect whatever i find fairly reliably documented/tested.
http://www.lxhp.in-berlin.de/lhpsyscal.html

regards,
hp

Signature · 6 lines
Linux,Assembly,Forth: http://www.lxhp.in-berlin.de/index-lx.shtml en/de
NO abusive software patents http://petition.eurolinux.org/pr/pr17.html
-
To unsubscribe from this list: send the line "unsubscribe linux-assembly" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html