sound
hi
I am new on this list and my name is Philippe.
I used to make some programs on windows but wanted to trye on linux. I have a problem with a small prog i had done for windows witch play sounds on the fm chip of a sound card.
But when i translate it on linux, it doesn't work any more. It compile and link correctly(nasm), but on execution it writes:
segmentation fault!
I post you the sources at the end of this message.
I had an other question:
Where can I find bible of all the interruptions and what is the name of it?
Philippe
;************************************************
;* Ecriture sur SoundBlaster *
;*1-ecrire dans le adresse port0x388 *
;*2-attendre 12 cycles *
;*3-ecrire dans le data port0x389 *
;*4-attendre 84 cycles *
;compiler:
; nasm -f elf SBB.asm
; ld -s -o SBB SBB.o
section .text ;section declaration
;we must export the entry point to the ELF
linker or
global _start ;loader. They conventionally recognize _start as
their
;entry point. Use ld -e foo to override the
default.
_start:
;mettre tous les registres SB a zero
mov edx,0x388 ;port adresse mov eax,0x20 ;registre sb 20 out dx,al mov edx,0x389 ;data port mov al,7 out dx,al
mov edx,0x388 ;port adresse
mov al,0x40 ;registre sb 40
out dx,al
;call WaitR mov edx,0x389 ;data port mov al,0x10 out dx,al ;call WaitR
mov edx,0x388 ;port adresse
mov al,0x60 ;registre sb 20
out dx,al
;call WaitR mov edx,0x389 ;data port mov eax,0xf0 out dx,al ;call WaitR mov edx,0x388 ;port adresse mov al,0x80 ;registre sb 20 out dx,al mov edx,0x389 ;data port mov al,70 out dx,al
mov edx,0x388 ;port adresse
mov al,0x23 ;registre sb 20
out dx,al
;call WaitR mov edx,0x389 ;data port mov eax,1 out dx,al ;call WaitR
mov edx,0x388 ;port adresse
mov eax,0x43 ;registre sb 20
out dx,al
;call WaitR mov edx,0x389 ;data port mov eax,00 out dx,al ;call WaitR
mov edx,0x388 ;port adresse
mov eax,0x63 ;registre sb 20
out dx,al
;call WaitR mov edx,0x389 ;data port mov eax,0xf0 out dx,al ;call WaitR
mov edx,0x388 ;port adresse
mov eax,0x83 ;registre sb 20
out dx,al
;call WaitR mov edx,0x389 ;data port mov eax,0x7f out dx,al dest3: mov cx,0xff
dest2:
mov edx,0x388 ;port adresse mov al,0xa0 ;frequency out dx,al mov edx,0x389 ;data port mov al,cl xor al,dl out dx,al ;**send the sound now gogogogo go mov edx,0x388 ;port adresse mov eax,0xb0 ;registre sb 20 out dx,al mov edx,0x389 ;data port mov eax,0x31 out dx,al call Waitc call Waitc call Waitc call Waitc loop dest2
;*******************************************************
mov edx,0x388 ;port adresse
mov eax,0xb0 ;registre sb 20
out dx,al
;CHK: ;attend qu'on appuye sur la touche espace***** ;mov ah,8 ;mov dl,0xFF ;int 0x21 ;cmp al,' ' ;espace ;je SUITE ;jmp CHK ;SUITE: mov edx,0x389 ;data port mov eax,0 out dx,al
;mov ax,0x4c
;int 0x21
mov ebx,0 ;first syscall argument: exit code
mov eax,1 ;system call number (sys_exit)
int 0x80 ;call kerneWaitc:
push ecx mov ecx,0x8fff
W1:
nop
loop W1
pop ecx
ret
Waitb:
push ecx mov ecx,0x1fff
W2:
nop
loop W2
pop ecx
ret
Quoted 183 lines · philippe
hi
I am new on this list and my name is Philippe.
I used to make some programs on windows but wanted to trye on linux. I have a problem with a small prog i had done for windows witch play sounds on the fm chip of a sound card.
But when i translate it on linux, it doesn't work any more. It compile and link correctly(nasm), but on execution it writes:
segmentation fault!
I post you the sources at the end of this message.I had an other question:
Where can I find bible of all the interruptions and what is the name of it?Philippe
;************************************************
;* Ecriture sur SoundBlaster *
;*1-ecrire dans le adresse port0x388 *
;*2-attendre 12 cycles *
;*3-ecrire dans le data port0x389 *
;*4-attendre 84 cycles *;compiler:
; nasm -f elf SBB.asm
; ld -s -o SBB SBB.osection .text ;section declaration
;we must export the entry point to the ELF
linker or
global_start;loader. They conventionally recognize_startas
their
;entry point. Use ld -e foo to override the
default.
_start:;mettre tous les registres SB a zero
mov edx,0x388 ;port adresse mov eax,0x20 ;registre sb 20 out dx,al mov edx,0x389 ;data port mov al,7 out dx,almov edx,0x388 ;port adresse
mov al,0x40 ;registre sb 40
out dx,al;call WaitR mov edx,0x389 ;data port mov al,0x10 out dx,al ;call WaitRmov edx,0x388 ;port adresse
mov al,0x60 ;registre sb 20
out dx,al;call WaitR mov edx,0x389 ;data port mov eax,0xf0 out dx,al ;call WaitR mov edx,0x388 ;port adresse mov al,0x80 ;registre sb 20 out dx,al mov edx,0x389 ;data port mov al,70 out dx,almov edx,0x388 ;port adresse
mov al,0x23 ;registre sb 20
out dx,al;call WaitR mov edx,0x389 ;data port mov eax,1 out dx,al ;call WaitRmov edx,0x388 ;port adresse
mov eax,0x43 ;registre sb 20
out dx,al;call WaitR mov edx,0x389 ;data port mov eax,00 out dx,al ;call WaitRmov edx,0x388 ;port adresse
mov eax,0x63 ;registre sb 20
out dx,al;call WaitR mov edx,0x389 ;data port mov eax,0xf0 out dx,al ;call WaitRmov edx,0x388 ;port adresse
mov eax,0x83 ;registre sb 20
out dx,al;call WaitR mov edx,0x389 ;data port mov eax,0x7f out dx,al dest3: mov cx,0xffdest2:
mov edx,0x388 ;port adresse mov al,0xa0 ;frequency out dx,al mov edx,0x389 ;data port mov al,cl xor al,dl out dx,al ;**send the sound now gogogogo go mov edx,0x388 ;port adresse mov eax,0xb0 ;registre sb 20 out dx,al mov edx,0x389 ;data port mov eax,0x31 out dx,al call Waitc call Waitc call Waitc call Waitc loop dest2;*******************************************************
mov edx,0x388 ;port adresse
mov eax,0xb0 ;registre sb 20
out dx,al;CHK: ;attend qu'on appuye sur la touche espace***** ;mov ah,8 ;mov dl,0xFF ;int 0x21 ;cmp al,' ' ;espace ;je SUITE ;jmp CHK ;SUITE: mov edx,0x389 ;data port mov eax,0 out dx,al;mov ax,0x4c
;int0x21mov ebx,0 ;first syscall argument: exit code mov eax,1 ;system call number (sys_exit) int 0x80 ;call kerneWaitc:
push ecx mov ecx,0x8fffW1:
nop
loop W1
pop ecx
ret
Waitb:push ecx mov ecx,0x1fffW2:
nop
loop W2
pop ecx
ret
-
To unsubscribe from this list: send the line "unsubscribe linux-assembly" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 5 lines · philippe
Date: Mon, 24 Jun 2002 23:51:11 +0200
From: philippe <[email protected]>
To: [email protected]
Subject: sound
Quoted 8 lines
hi
I am new on this list and my name is Philippe.
I used to make some programs on windows but wanted to trye on linux. I have a problem with a small prog i had done for windows witch play sounds on the fm chip of a sound card.
But when i translate it on linux, it doesn't work any more. It compile and link correctly(nasm), but on execution it writes:
segmentation fault!
Maybe You have no permission to write to that ports. Use io_perm syscall to set it.
Also this king of programming is not good choice for linux. Use kernel to do the dirty work. You can use a "services" (ioctls) of sound driver to produce sound. I think there is an tutorial on www.linuxassembly.org for a sound too.
Quoted 5 lines
I post you the sources at the end of this message.
I had an other question:
Where can I find bible of all the interruptions and what is the name of it?
It is called Ralf's Brown Inetrrupt list.
Use google.com to find it (it was on Simtelnet mirrors)
Regards
Rudolf
Quoted 172 lines
Philippe
;************************************************
;* Ecriture sur SoundBlaster *
;*1-ecrire dans le adresse port0x388 *
;*2-attendre 12 cycles *
;*3-ecrire dans le data port0x389 *
;*4-attendre 84 cycles *;compiler:
; nasm -f elf SBB.asm
; ld -s -o SBB SBB.osection .text ;section declaration
;we must export the entry point to the ELF
linker or
global_start;loader. They conventionally recognize_startas
their
;entry point. Use ld -e foo to override the
default.
_start:;mettre tous les registres SB a zero
mov edx,0x388 ;port adresse mov eax,0x20 ;registre sb 20 out dx,al mov edx,0x389 ;data port mov al,7 out dx,almov edx,0x388 ;port adresse
mov al,0x40 ;registre sb 40
out dx,al;call WaitR mov edx,0x389 ;data port mov al,0x10 out dx,al ;call WaitRmov edx,0x388 ;port adresse
mov al,0x60 ;registre sb 20
out dx,al;call WaitR mov edx,0x389 ;data port mov eax,0xf0 out dx,al ;call WaitR mov edx,0x388 ;port adresse mov al,0x80 ;registre sb 20 out dx,al mov edx,0x389 ;data port mov al,70 out dx,almov edx,0x388 ;port adresse
mov al,0x23 ;registre sb 20
out dx,al;call WaitR mov edx,0x389 ;data port mov eax,1 out dx,al ;call WaitRmov edx,0x388 ;port adresse
mov eax,0x43 ;registre sb 20
out dx,al;call WaitR mov edx,0x389 ;data port mov eax,00 out dx,al ;call WaitRmov edx,0x388 ;port adresse
mov eax,0x63 ;registre sb 20
out dx,al;call WaitR mov edx,0x389 ;data port mov eax,0xf0 out dx,al ;call WaitRmov edx,0x388 ;port adresse
mov eax,0x83 ;registre sb 20
out dx,al;call WaitR mov edx,0x389 ;data port mov eax,0x7f out dx,al dest3: mov cx,0xffdest2:
mov edx,0x388 ;port adresse mov al,0xa0 ;frequency out dx,al mov edx,0x389 ;data port mov al,cl xor al,dl out dx,al ;**send the sound now gogogogo go mov edx,0x388 ;port adresse mov eax,0xb0 ;registre sb 20 out dx,al mov edx,0x389 ;data port mov eax,0x31 out dx,al call Waitc call Waitc call Waitc call Waitc loop dest2;*******************************************************
mov edx,0x388 ;port adresse
mov eax,0xb0 ;registre sb 20
out dx,al;CHK: ;attend qu'on appuye sur la touche espace***** ;mov ah,8 ;mov dl,0xFF ;int 0x21 ;cmp al,' ' ;espace ;je SUITE ;jmp CHK ;SUITE: mov edx,0x389 ;data port mov eax,0 out dx,al;mov ax,0x4c
;int0x21mov ebx,0 ;first syscall argument: exit code mov eax,1 ;system call number (sys_exit) int 0x80 ;call kerneWaitc:
push ecx mov ecx,0x8fffW1:
nop
loop W1
pop ecx
ret
Waitb:push ecx mov ecx,0x1fffW2:
nop
loop W2
pop ecx
ret
-
To unsubscribe from this list: send the line "unsubscribe linux-assembly" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 5 lines · On Mon, 24 Jun 2002 23:51:11 +0200 philippe <[email protected]> wrote:
hi
I am new on this list and my name is Philippe.
I used to make some programs on windows but wanted to trye on linux. I have a problem with a small prog i had done for windows witch play sounds on the fm chip of a sound card.
direct port access requires 'root' rights and the concerning ports being enabled, with sys_ioctl or sys_ioperm. - e.g <man 2 ioctl>
Quoted 8 lines
But when i translate it on linux, it doesn't work any more. It compile and link correctly(nasm), but on execution it writes:
segmentation fault!
I post you the sources at the end of this message.I had an other question:
Where can I find bible of all the interruptions and what is the name of it?
basically, there is one interrupt and several sub-codes, passed w. eax. 'the' bible doesn't exist, linux is in a somewhat 'fluid' state and, badly documented. Paricularly no aequivalent to 'RBIL' but, you might get some help from my syscall pages where i collect whatever i find fairly reliably documented/tested.
http://www.lxhp.in-berlin.de/lhpsyscal.html
regards,
hp
Signature · 6 lines
Linux,Assembly,Forth: http://www.lxhp.in-berlin.de/index-lx.shtml en/de NO abusive software patents http://petition.eurolinux.org/pr/pr17.html - To unsubscribe from this list: send the line "unsubscribe linux-assembly" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html