k210/819 Zalon driver
Hi,
why I need to enable PCI/EISA to make available option zalon driver in SCSI drivers? My HP K210 don't have PCIs and EISA?!!?!?!?
Quoted 4 lines · Stephan Trajkoff
Hi,
why I need to enable PCI/EISA to make available option zalon driver in SCSI drivers?
My HP K210 don't have PCIs and EISA?!!?!?!?
At the moment you have to enable PCI because that is the way the config script is organised. I don't know if zalon support would build without PCI because it uses the ncr53c8xx driver which normally drives only PCI chips. It is an area that needs attention anyway, because if you enable sym53c8xx_2 you wont get the zalon option at all (which is obviously wrong).
Richard?!!?!?!?
T think that my HP K210 don't have any PCIs or EISAs... dmesg don't show me that I have any PCIs or EISAs... and I have ncr53c720 not 8xx
Quoted 27 lines · Richard Hirst
Quoted 5 lines · Stephan Trajkoff
Hi,
why I need to enable PCI/EISA to make available option zalon driver in SCSI drivers? My HP K210 don't have PCIs and EISA?!!?!?!?At the moment you have to enable PCI because that is the way the config script is organised. I don't know if zalon support would build without PCI because it uses the ncr53c8xx driver which normally drives only PCI chips. It is an area that needs attention anyway, because if you enable
sym53c8xx_2you wont get the zalon option at all (which is obviously wrong).Richard?!!?!?!?
_______________________________________________
parisc-linux mailing list
[email protected]
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux
Quoting Stephan Trajkoff <[email protected]>:
Quoted 4 lines
T think that my HP K210 don't have any PCIs or EISAs... dmesg don't show me that I have any PCIs or EISAs... and I have ncr53c720 not 8xx
No, you don't have PCI or EISA, but you do need the PCI code for the time being. Although the Zalon board has a 720, it is driven by the 8xx code. The 53c8xx driver has been modified to handle the 720 (which is a lot closer to the 8xx chips in terms of scrip capabilities than its poor 700 and 710 relations).
-Andy
Quoted 40 lines
Quoted 6 lines · Richard Hirst
Quoted 2 lines · Stephan Trajkoff
Hi,
why I need to enable PCI/EISA to make available option zalon driver inQuoted 6 lines
Quoted 4 lines
SCSI drivers?
My HP K210 don't have PCIs and EISA?!!?!?!?At the moment you have to enable PCI because that is the way the
config
Quoted 1 line
script is organised. I don't know if zalon support would build
without
Quoted 1 line
PCI because it uses the ncr53c8xx driver which normally drives only
PCI
Quoted 1 line
chips. It is an area that needs attention anyway, because if you
enable
Quoted 14 lines
sym53c8xx_2you wont get the zalon option at all (which is obviously wrong).Richard?!!?!?!?
_______________________________________________
parisc-linux mailing list
[email protected]
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux
Quoted 5 lines
_______________________________________________
parisc-linux mailing list
[email protected]
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux
------------------------------------------------------------
Få din egen @start.no-adresse gratis på http://www.start.no/
It is very confusing thing, for this reason I compiled kernel 10 times, to understand that I have to enable PCI...
Quoted 104 lines · Andy Walker
Quoting Stephan Trajkoff <[email protected]>:
Quoted 6 lines
T think that my HP K210 don't have any PCIs or EISAs... dmesg don't show me that I have any PCIs or EISAs... and I have ncr53c720 not 8xx
No, you don't have PCI or EISA, but you do need the PCI code for the time being. Although the Zalon board has a 720, it is driven by the 8xx code. The 53c8xx driver has been modified to handle the 720 (which is a lot closer to the 8xx chips in terms of scrip capabilities than its poor 700 and 710 relations).
-Andy
Quoted 61 lines
Quoted 9 lines · Richard Hirst
Quoted 4 lines · Stephan Trajkoff
Hi,
why I need to enable PCI/EISA to make available option zalon driver inQuoted 9 lines
Quoted 6 lines
SCSI drivers?
My HP K210 don't have PCIs and EISA?!!?!?!?At the moment you have to enable PCI because that is the way the
config
Quoted 3 lines
script is organised. I don't know if zalon support would build
without
Quoted 3 lines
PCI because it uses the ncr53c8xx driver which normally drives only
PCI
Quoted 3 lines
chips. It is an area that needs attention anyway, because if you
enable
Quoted 16 lines
sym53c8xx_2you wont get the zalon option at all (which is obviously wrong).Richard?!!?!?!?
_______________________________________________
parisc-linux mailing list
[email protected]
http://lists.parisc-linux.org/mailman/listinfo/parisc-linuxQuoted 7 lines
_______________________________________________
parisc-linux mailing list
[email protected]
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux------------------------------------------------------------
Få din egen @start.no-adresse gratis på http://www.start.no/_______________________________________________
parisc-linux mailing list
[email protected]
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux
Quoted 3 lines · Stephan Trajkoff
T think that my HP K210 don't have any PCIs or EISAs... dmesg don't show me that I have any PCIs or EISAs... and I have ncr53c720 not 8xx
Right. It's confusing. Please send a patch that either corrects the problem or gives a useful error. I don't expect it to be that hard to do but it does take time. I'm more interested in working on SMP-Interrupt issues (per-CPU statistics and IRQ regions, Interrupt distribution).
thanks,
grant
Quoted 6 lines · Richard Hirst
Quoted 4 lines · Stephan Trajkoff
Hi,
why I need to enable PCI/EISA to make available option zalon driver in SCSI drivers?
My HP K210 don't have PCIs and EISA?!!?!?!?
Quoted 8 lines
At the moment you have to enable PCI because that is the way the config script is organised. I don't know if zalon support would build without PCI because it uses the ncr53c8xx driver which normally drives only PCI chips. It is an area that needs attention anyway, because if you enable
sym53c8xx_2you wont get the zalon option at all (which is obviously wrong).Richard?!!?!?!?
Something else is that even if you don't have PCI slots, some of the cards you have may contain a GSC<->PCI adapter and a PCI device. The 100Mbit & Gigabit lan cards are definitely like this and there may be others.
It probably is possible to compile the zalon driver without having PCI enabled but it'll take a small amount of work to verify.
Signature · 1 line
Revolutions do not require corporate support.
Quoted 3 lines · Stephan Trajkoff
Hi,
why I need to enable PCI/EISA to make available option zalon driver in SCSI drivers?
You don't need to any more.
Richard