Skip to contentSkip to conversation

k210/819 Zalon driver

parisc-linux Stephan Trajkoff 5 participants 8 messages Jul 9, 2002 – Jul 20, 2002

lore
Share & tools
lore
#0 lore raw

Hi,
why I need to enable PCI/EISA to make available option zalon driver in SCSI drivers? My HP K210 don't have PCIs and EISA?!!?!?!?

#1 lore raw
Quoted 4 lines · Stephan Trajkoff

Hi,
why I need to enable PCI/EISA to make available option zalon driver in SCSI drivers?
My HP K210 don't have PCIs and EISA?!!?!?!?

At the moment you have to enable PCI because that is the way the config script is organised. I don't know if zalon support would build without PCI because it uses the ncr53c8xx driver which normally drives only PCI chips. It is an area that needs attention anyway, because if you enable sym53c8xx_2 you wont get the zalon option at all (which is obviously wrong).

Richard?!!?!?!?

#2 lore raw

T think that my HP K210 don't have any PCIs or EISAs... dmesg don't show me that I have any PCIs or EISAs... and I have ncr53c720 not 8xx

Quoted 27 lines · Richard Hirst
Quoted 5 lines · Stephan Trajkoff

Hi,
why I need to enable PCI/EISA to make available option zalon driver in SCSI drivers? My HP K210 don't have PCIs and EISA?!!?!?!?

At the moment you have to enable PCI because that is the way the config script is organised. I don't know if zalon support would build without PCI because it uses the ncr53c8xx driver which normally drives only PCI chips. It is an area that needs attention anyway, because if you enable sym53c8xx_2 you wont get the zalon option at all (which is obviously wrong).

Richard?!!?!?!?

_______________________________________________
parisc-linux mailing list
[email protected]
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux

#3 lore raw

Quoting Stephan Trajkoff <[email protected]>:

Quoted 4 lines

T think that my HP K210 don't have any PCIs or EISAs... dmesg don't show me that I have any PCIs or EISAs... and I have ncr53c720 not 8xx

No, you don't have PCI or EISA, but you do need the PCI code for the time being. Although the Zalon board has a 720, it is driven by the 8xx code. The 53c8xx driver has been modified to handle the 720 (which is a lot closer to the 8xx chips in terms of scrip capabilities than its poor 700 and 710 relations).

-Andy

Quoted 40 lines
Quoted 6 lines · Richard Hirst
Quoted 2 lines · Stephan Trajkoff

Hi,
why I need to enable PCI/EISA to make available option zalon driver in

Quoted 6 lines
Quoted 4 lines

SCSI drivers?
My HP K210 don't have PCIs and EISA?!!?!?!?

At the moment you have to enable PCI because that is the way the

config

Quoted 1 line

script is organised. I don't know if zalon support would build

without

Quoted 1 line

PCI because it uses the ncr53c8xx driver which normally drives only

PCI

Quoted 1 line

chips. It is an area that needs attention anyway, because if you

enable

Quoted 14 lines

sym53c8xx_2 you wont get the zalon option at all (which is obviously wrong).

Richard?!!?!?!?

_______________________________________________
parisc-linux mailing list
[email protected]
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux

Quoted 5 lines

_______________________________________________
parisc-linux mailing list
[email protected]
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux

------------------------------------------------------------
Få din egen @start.no-adresse gratis på http://www.start.no/

#4 lore raw

It is very confusing thing, for this reason I compiled kernel 10 times, to understand that I have to enable PCI...

Quoted 104 lines · Andy Walker

Quoting Stephan Trajkoff <[email protected]>:

Quoted 6 lines

T think that my HP K210 don't have any PCIs or EISAs... dmesg don't show me that I have any PCIs or EISAs... and I have ncr53c720 not 8xx

No, you don't have PCI or EISA, but you do need the PCI code for the time being. Although the Zalon board has a 720, it is driven by the 8xx code. The 53c8xx driver has been modified to handle the 720 (which is a lot closer to the 8xx chips in terms of scrip capabilities than its poor 700 and 710 relations).

-Andy

Quoted 61 lines
Quoted 9 lines · Richard Hirst
Quoted 4 lines · Stephan Trajkoff

Hi,
why I need to enable PCI/EISA to make available option zalon driver in

Quoted 9 lines
Quoted 6 lines

SCSI drivers?
My HP K210 don't have PCIs and EISA?!!?!?!?

At the moment you have to enable PCI because that is the way the

config

Quoted 3 lines

script is organised. I don't know if zalon support would build

without

Quoted 3 lines

PCI because it uses the ncr53c8xx driver which normally drives only

PCI

Quoted 3 lines

chips. It is an area that needs attention anyway, because if you

enable

Quoted 16 lines

sym53c8xx_2 you wont get the zalon option at all (which is obviously wrong).

Richard?!!?!?!?

_______________________________________________
parisc-linux mailing list
[email protected]
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux

Quoted 7 lines

_______________________________________________
parisc-linux mailing list
[email protected]
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux

------------------------------------------------------------
Få din egen @start.no-adresse gratis på http://www.start.no/

_______________________________________________
parisc-linux mailing list
[email protected]
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux

#6 lore raw
In reply to Richard Hirst
Quoted 6 lines · Richard Hirst
Quoted 4 lines · Stephan Trajkoff

Hi,
why I need to enable PCI/EISA to make available option zalon driver in SCSI drivers?
My HP K210 don't have PCIs and EISA?!!?!?!?

Quoted 8 lines

At the moment you have to enable PCI because that is the way the config script is organised. I don't know if zalon support would build without PCI because it uses the ncr53c8xx driver which normally drives only PCI chips. It is an area that needs attention anyway, because if you enable sym53c8xx_2 you wont get the zalon option at all (which is obviously wrong).

Richard?!!?!?!?

Something else is that even if you don't have PCI slots, some of the cards you have may contain a GSC<->PCI adapter and a PCI device. The 100Mbit & Gigabit lan cards are definitely like this and there may be others.

It probably is possible to compile the zalon driver without having PCI enabled but it'll take a small amount of work to verify.

Signature · 1 line
Revolutions do not require corporate support.
#5 lore raw
In reply to Stephan Trajkoff
Quoted 3 lines · Stephan Trajkoff

T think that my HP K210 don't have any PCIs or EISAs... dmesg don't show me that I have any PCIs or EISAs... and I have ncr53c720 not 8xx

Right. It's confusing. Please send a patch that either corrects the problem or gives a useful error. I don't expect it to be that hard to do but it does take time. I'm more interested in working on SMP-Interrupt issues (per-CPU statistics and IRQ regions, Interrupt distribution).

thanks,
grant