sscape_ioctl.h not found!
Hi,
I get the last CVS snapshot (from today) of alsa-driver and I try to compile it on my new machine with a 2.4.19 kernel.
At the beginning, I had hard to figure out that the directory alsa-kernel was missing.
Ok, I get it from the rc3 release.
Then, I tried the following command line:
./cvscompile --with-cards=cmipci --with-sequencer=yes --with-oss=yes -with-isapnp=no --with-debug=none
But then, during the dependencies building, I get:
gcc -M -D__KERNEL__ -DMODULE=1 -I/home/fleury/install/src/alsa-driver/include -I/lib/modules/2.4.19custom/build/include -O2 -mpreferred-stack-boundary=2 -march=i686 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -DALSA_BUILD als100.c azt2320.c cmi8330.c dt019x.c es18xx.c opl3sa2.c sgalaxy.c sscape.c > .depend sscape.c:41: sound/sscape_ioctl.h: No such file or directory
make[1]: *** [fastdep] Error 1
make[1]: Leaving directory `/home/fleury/install/src/alsa-driver/isa'
make: *** [dep] Error 1
Actually, I didn't find any sound/sscape_ioctl.h anywhere... :-/
Did I miss something ?
Regards
Signature · 11 lines
Emmanuel Most of my cliches aren't original. -- Chuck Knox, NFL football coach ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf
Quoted 28 lines · Emmanuel Fleury
Hi,
I get the last CVS snapshot (from today) of alsa-driver and I try to compile it on my new machine with a 2.4.19 kernel.
At the beginning, I had hard to figure out that the directory alsa-kernel was missing.
Ok, I get it from the rc3 release.
Then, I tried the following command line:
./cvscompile --with-cards=cmipci --with-sequencer=yes --with-oss=yes -with-isapnp=no --with-debug=noneBut then, during the dependencies building, I get:
gcc -M -D__KERNEL__ -DMODULE=1
(quoted diff) +0
-4-I/home/fleury/install/src/alsa-driver/include -I/lib/modules/2.4.19custom/build/include -O2 -mpreferred-stack-boundary=2 -march=i686 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -DALSA_BUILD als100.c
azt2320.ccmi8330.cdt019x.ces18xx.copl3sa2.csgalaxy.csscape.c> .depend sscape.c:41:sound/sscape_ioctl.h: No such file or directory make[1]: *** [fastdep] Error 1
make[1]: Leaving directory `/home/fleury/install/src/alsa-driver/isa'
make: *** [dep] Error 1
Quoted 2 lines
Actually, I didn't find any
sound/sscape_ioctl.hanywhere... :-/
The file sscape_ioctl.h is in alsa-kernel/include/ and I can get it via CVS update. Is it fixed in the meantime? Your mix of cvs and rc3 is a bad choice. Try to use a clean cvs or a clean rc3 tree instead.
martin
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
Quoted 4 lines · Martin Langer
The file
sscape_ioctl.his in alsa-kernel/include/ and I can get it via CVS update. Is it fixed in the meantime? Your mix of cvs and rc3 is a bad choice. Try to use a clean cvs or a clean rc3 tree instead.
Ok, so it was my fault. I shouldn't have mixed the alsa-kernel from the 0.9.0rc3 and the CVS.
Actually, now I have figured out that alsa-kernel is an independant module in the CVS archive... :-/
I didn't read the documentation enough.
Sorry.
Signature · 12 lines
Emmanuel I always pass on good advice. It is the only thing to do with it. It is never of any use to oneself. -- Oscar Wilde ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf