Skip to contentSkip to conversation

sscape_ioctl.h not found!

DISCUSSION Emmanuel Fleury 2 participants 3 messages Sep 23, 2002

lore
Share & tools
lore
#0 lore raw

Hi,

I get the last CVS snapshot (from today) of alsa-driver and I try to compile it on my new machine with a 2.4.19 kernel.

At the beginning, I had hard to figure out that the directory alsa-kernel was missing.

Ok, I get it from the rc3 release.

Then, I tried the following command line:
./cvscompile --with-cards=cmipci --with-sequencer=yes --with-oss=yes -with-isapnp=no --with-debug=none

But then, during the dependencies building, I get:

gcc -M -D__KERNEL__ -DMODULE=1 -I/home/fleury/install/src/alsa-driver/include -I/lib/modules/2.4.19custom/build/include -O2 -mpreferred-stack-boundary=2 -march=i686 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -DALSA_BUILD als100.c azt2320.c cmi8330.c dt019x.c es18xx.c opl3sa2.c sgalaxy.c sscape.c > .depend sscape.c:41: sound/sscape_ioctl.h: No such file or directory
make[1]: *** [fastdep] Error 1
make[1]: Leaving directory `/home/fleury/install/src/alsa-driver/isa'
make: *** [dep] Error 1

Actually, I didn't find any sound/sscape_ioctl.h anywhere... :-/

Did I miss something ?

Regards

Signature · 11 lines
Emmanuel

Most of my cliches aren't original.
  -- Chuck Knox, NFL football coach



-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
#1 lore raw
Quoted 28 lines · Emmanuel Fleury

Hi,

I get the last CVS snapshot (from today) of alsa-driver and I try to compile it on my new machine with a 2.4.19 kernel.

At the beginning, I had hard to figure out that the directory alsa-kernel was missing.

Ok, I get it from the rc3 release.

Then, I tried the following command line:
./cvscompile --with-cards=cmipci --with-sequencer=yes --with-oss=yes -with-isapnp=no --with-debug=none

But then, during the dependencies building, I get:

gcc -M -D__KERNEL__ -DMODULE=1

(quoted diff) +0 -4
-I/home/fleury/install/src/alsa-driver/include 
-I/lib/modules/2.4.19custom/build/include -O2 
-mpreferred-stack-boundary=2 -march=i686 -DLINUX -Wall 
-Wstrict-prototypes -fomit-frame-pointer -pipe -DALSA_BUILD  als100.c 

azt2320.c cmi8330.c dt019x.c es18xx.c opl3sa2.c sgalaxy.c sscape.c > .depend sscape.c:41: sound/sscape_ioctl.h: No such file or directory make[1]: *** [fastdep] Error 1
make[1]: Leaving directory `/home/fleury/install/src/alsa-driver/isa'
make: *** [dep] Error 1

Quoted 2 lines

Actually, I didn't find any sound/sscape_ioctl.h anywhere... :-/

The file sscape_ioctl.h is in alsa-kernel/include/ and I can get it via CVS update. Is it fixed in the meantime? Your mix of cvs and rc3 is a bad choice. Try to use a clean cvs or a clean rc3 tree instead.

martin

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

#2 lore raw
Quoted 4 lines · Martin Langer

The file sscape_ioctl.h is in alsa-kernel/include/ and I can get it via CVS update. Is it fixed in the meantime? Your mix of cvs and rc3 is a bad choice. Try to use a clean cvs or a clean rc3 tree instead.

Ok, so it was my fault. I shouldn't have mixed the alsa-kernel from the 0.9.0rc3 and the CVS.

Actually, now I have figured out that alsa-kernel is an independant module in the CVS archive... :-/

I didn't read the documentation enough.

Sorry.

Signature · 12 lines
Emmanuel

I always pass on good advice. It is the only thing to do with it.
It is never of any use to oneself.
  -- Oscar Wilde



-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf