RME9636 ADAT1 Recording
Quoted 2 lines
are you trying to record a s/pdif signal, or an ADAT signal?
The input on ADAT1 (in) is an optical line connected directly to a DAT Recorder/Player. So maybe I am confused, isn't this specific optical input connection an ADAT signal? Or should I be setting the optical input as s/pdif? If this is the case, how do I go about setting it to s/pdif?
Otherwise, if I will be using the alsa-lib plugin for striding the channels, would I be better off using the Intel Performance Primitives (IPP) libraries to do the channel striding? I do want to take advantage of the Pentium 4.
Once again, I appreciate all your help. I look forward to hearing from you, hopefully this time will be the last time I need to bother you. Thanks.
=====
Shane M. Walton, Software Engineer
Digital System Resources, Inc.
[email protected] : [email protected]
703.234.1674
__________________________________________________
Do you Yahoo!?
New DSL Internet Access from SBC & Yahoo!
http://sbc.yahoo.com
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven.
http://thinkgeek.com/sf
Quoted 2 lines
Otherwise, if I will be using the alsa-lib plugin for striding the channels, would I be better off using the
if you ask for non-interleaved data, there is no striding going on. the hardware is not interleaved.
Quoted 3 lines
Intel Performance Primitives (IPP) libraries to do the channel striding? I do want to take advantage of the Pentium 4.
this is a severe optimization that i would spend time on *only* after the rest of my application was finished and i could demonstrate some useful gain from doing.
--p
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
Thanks Paul. I am not sure how I was able to get the data on channel 0 and 1 with the beta6, but to save all of us from any more time on this matter, I am going to have my application just look at channels 16 and 17. Thanks again for all you help.
Quoted 15 lines · --- Paul Davis
Quoted 1 line
Otherwise, if I will be using the alsa-lib plugin
for
Quoted 1 line
striding the channels, would I be better off using
the
if you ask for non-interleaved data, there is no striding going
on. the hardware is not interleaved.Quoted 1 line
Intel Performance Primitives (IPP) libraries to do
the
Quoted 1 line
channel striding? I do want to take advantage of
the
Quoted 1 line
Pentium 4.
Quoted 10 lines
this is a severe optimization that i would spend time on *only* after
the rest of my application was finished and i could demonstrate some
useful gain from doing.--p
-------------------------------------------------------
Quoted 7 lines
This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
Alsa-devel mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
=====
Shane M. Walton, Software Engineer
Digital System Resources, Inc.
[email protected] : [email protected]
703.234.1674
__________________________________________________
Do you Yahoo!?
New DSL Internet Access from SBC & Yahoo!
http://sbc.yahoo.com
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven.
http://thinkgeek.com/sf