Skip to contentSkip to conversation

RME9636 ADAT1 Recording

DISCUSSION Shane Walton 2 participants 3 messages Sep 24, 2002

lore
Share & tools
lore
#0 lore raw
Quoted 2 lines

are you trying to record a s/pdif signal, or an ADAT signal?

The input on ADAT1 (in) is an optical line connected directly to a DAT Recorder/Player. So maybe I am confused, isn't this specific optical input connection an ADAT signal? Or should I be setting the optical input as s/pdif? If this is the case, how do I go about setting it to s/pdif?

Otherwise, if I will be using the alsa-lib plugin for striding the channels, would I be better off using the Intel Performance Primitives (IPP) libraries to do the channel striding? I do want to take advantage of the Pentium 4.

Once again, I appreciate all your help. I look forward to hearing from you, hopefully this time will be the last time I need to bother you. Thanks.

=====
Shane M. Walton, Software Engineer
Digital System Resources, Inc.
[email protected] : [email protected]
703.234.1674

__________________________________________________
Do you Yahoo!?
New DSL Internet Access from SBC & Yahoo!
http://sbc.yahoo.com

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven.
http://thinkgeek.com/sf

#1 lore raw
Quoted 2 lines

Otherwise, if I will be using the alsa-lib plugin for striding the channels, would I be better off using the

if you ask for non-interleaved data, there is no striding going on. the hardware is not interleaved.

Quoted 3 lines

Intel Performance Primitives (IPP) libraries to do the channel striding? I do want to take advantage of the Pentium 4.

this is a severe optimization that i would spend time on *only* after the rest of my application was finished and i could demonstrate some useful gain from doing.

--p

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

#2 lore raw

Thanks Paul. I am not sure how I was able to get the data on channel 0 and 1 with the beta6, but to save all of us from any more time on this matter, I am going to have my application just look at channels 16 and 17. Thanks again for all you help.

Quoted 15 lines · --- Paul Davis
Quoted 1 line

Otherwise, if I will be using the alsa-lib plugin

for

Quoted 1 line

striding the channels, would I be better off using

the

if you ask for non-interleaved data, there is no striding going
on. the hardware is not interleaved.

Quoted 1 line

Intel Performance Primitives (IPP) libraries to do

the

Quoted 1 line

channel striding? I do want to take advantage of

the

Quoted 1 line

Pentium 4.

Quoted 10 lines

this is a severe optimization that i would spend time on *only* after
the rest of my application was finished and i could demonstrate some
useful gain from doing.

--p

-------------------------------------------------------

Quoted 7 lines

This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
Alsa-devel mailing list [email protected]

https://lists.sourceforge.net/lists/listinfo/alsa-devel

=====
Shane M. Walton, Software Engineer
Digital System Resources, Inc.
[email protected] : [email protected]
703.234.1674

__________________________________________________
Do you Yahoo!?
New DSL Internet Access from SBC & Yahoo!
http://sbc.yahoo.com

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven.
http://thinkgeek.com/sf