Skip to contentSkip to conversation

2.4.20-pre10-ac1 and Compaq Evo N160

DISCUSSION Andrew Kohlsmith 1 participant 1 message Oct 12, 2002 ACPI

lore
Share & tools
lore
#0 lore raw

I've been unable to get this machine to boot since the altirq patch for the 0503 ACPI code. It hangs just after trying to route IRQs.

With 2.4.20-pre10-ac1 I was able to get it to boot with pci=noacpi. I'm going to go back and try it with a few of the other kernels but I just wanted to know if that pci=noacpi paramater tells the PCI subsystem to ignore the ACPI IRQ routing tables or what it does.

Regards,
Andrew

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf