2.4.20-pre10-ac1 and Compaq Evo N160
I've been unable to get this machine to boot since the altirq patch for the 0503 ACPI code. It hangs just after trying to route IRQs.
With 2.4.20-pre10-ac1 I was able to get it to boot with pci=noacpi. I'm going to go back and try it with a few of the other kernels but I just wanted to know if that pci=noacpi paramater tells the PCI subsystem to ignore the ACPI IRQ routing tables or what it does.
Regards,
Andrew
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf