alsa-utils-0.9.0rc4
Hallo,
I have a problem compiling alsa-utils-0.9.0rc4:
RedHat 8.0
./configure
creating cache ./config.cache
configure: error: can not find install-sh or install.sh in . ./.. ./../..
Any hint?
-Wolfgang
Quoted 10 lines · Wolfgang
I have a problem compiling alsa-utils-0.9.0rc4:
RedHat 8.0
./configure
creating cache ./config.cache
configure: error: can not find install-sh orinstall.shin . ./.. ./../..Any hint?
I see the same problem. In the tarball, there are links where scripts should have been copied. To fix in rc5 too?
install-sh -> /usr/share/automake/install-sh missing -> /usr/share/automake/missing mkinstalldirs -> /usr/share/automake/mkinstalldirs
So compilation will work _only_ if you have automake installed.
Matthias
Signature · 10 lines
Clean custom Red Hat Linux rpm packages : http://freshrpms.net/ Red Hat Linux release 7.3 (Valhalla) running Linux kernel 2.4.18-10acpi Load : 1.32 0.46 0.19 ------------------------------------------------------- This sf.net email is sponsored by: Influence the future of Java(TM) technology. Join the Java Community Process(SM) (JCP(SM)) program now. http://ads.sourceforge.net/cgi-bin/redirect.pl?sunm0002en
At Wed, 23 Oct 2002 16:50:03 +0200,
Quoted 9 lines · Matthias Saou
Quoted 6 lines · Wolfgang
I have a problem compiling alsa-utils-0.9.0rc4:
RedHat 8.0
./configure
Quoted 7 lines
Quoted 4 lines
creating cache ./config.cache
configure: error: can not find install-sh orinstall.shin . ./.. ./../..Any hint?
I see the same problem. In the tarball, there are links where scripts should have been copied. To fix in rc5 too?
yes. --copy option for automake was missing in cvscompile. should be fixed.
Takashi
-------------------------------------------------------
This sf.net email is sponsored by: Influence the future of Java(TM) technology. Join the Java Community Process(SM) (JCP(SM)) program now.
http://ads.sourceforge.net/cgi-bin/redirect.pl?sunm0002en
rates and frame-based formats
Hi,
There are some frame-based formats defined in asound.h and pcm.h. For full-rate GSM, frames are 260 bits every 20 ms. So my question is:
In such a case, should an application use (and the driver define) a rate of 50Hz, or the standard 8000Hz?
Thanks,
Guilhem.
__________________________________________________
Do you Yahoo!?
Y! Web Hosting - Let the expert host your web site
http://webhosting.yahoo.com/
-------------------------------------------------------
This sf.net email is sponsored by: Influence the future of Java(TM) technology. Join the Java Community Process(SM) (JCP(SM)) program now.
http://ads.sourceforge.net/cgi-bin/redirect.pl?sunm0002en
Re: rates and frame-based formats
Quoted 6 lines · Guilhem Tardy
Hi,
There are some frame-based formats defined in
asound.handpcm.h. For full-rate GSM, frames are 260 bits every 20 ms. So my question is:
In such a case, should an application use (and the driver define) a rate of 50Hz, or the standard 8000Hz?
This is very good question. We should make a decision. If we use 50Hz, we can easily calculate frames per second, otherwise we have to translate sampling rate to physical rate.. But it's the only good point which I see.
Also, the situation is very easy for GSM where the sampling rate is fixed, but what about some variable rate compressions with different sampling rate / physical rate ratio?
Jaroslav
-----
Jaroslav Kysela <[email protected]>
Linux Kernel Sound Maintainer
ALSA Project http://www.alsa-project.org
SuSE Linux http://www.suse.com
-------------------------------------------------------
This sf.net email is sponsored by: Influence the future of Java(TM) technology. Join the Java Community Process(SM) (JCP(SM)) program now.
http://ads.sourceforge.net/cgi-bin/redirect.pl?sunm0002en
Re: rates and frame-based formats
Quoted 3 lines
This is very good question. We should make a decision. If we use 50Hz, we can easily calculate frames per second, otherwise we have to translate sampling rate to physical rate.. But it's the only good point which I see.
I am not sure how you'd translate between the two? To me, one option is to define the number of samples per frame (which is 1 for all commonly used formats), and then:
physical rate = sampling rate / samples per frame
Is the rate actually used for scheduling purposes? Because otherwise there's no need for something like "physical rate".
Quoted 3 lines
Also, the situation is very easy for GSM where the sampling rate is fixed, but what about some variable rate compressions with different sampling rate / physical rate ratio?
Although variable rate compressions can be an issue, all formats that I can think of have a specific number of samples per frame (if you allow the fact that MPEG-1 layer I, II and III are different formats).
Usually, a finite number of physical widths per frame translate into their corresponding bit rates. But MPEG-1 layer III seems to be another beast by only defining an average bit rate.
Guilhem.
__________________________________________________
Do you Yahoo!?
Y! Web Hosting - Let the expert host your web site
http://webhosting.yahoo.com/
-------------------------------------------------------
This sf.net email is sponsored by: Influence the future of Java(TM) technology. Join the Java Community Process(SM) (JCP(SM)) program now.
http://ads.sourceforge.net/cgi-bin/redirect.pl?sunm0002en