Skip to contentSkip to conversation

alsa-utils-0.9.0rc4

DISCUSSION Wolfgang Teichmann 5 participants 6 messages Oct 23, 2002

lore
Share & tools
lore
#0 lore raw

Hallo,

I have a problem compiling alsa-utils-0.9.0rc4:

RedHat 8.0

./configure

creating cache ./config.cache
configure: error: can not find install-sh or install.sh in . ./.. ./../..

Any hint?

-Wolfgang

#1 lore raw
Quoted 10 lines · Wolfgang

I have a problem compiling alsa-utils-0.9.0rc4:

RedHat 8.0

./configure

creating cache ./config.cache
configure: error: can not find install-sh or install.sh in . ./.. ./../..

Any hint?

I see the same problem. In the tarball, there are links where scripts should have been copied. To fix in rc5 too?

install-sh -> /usr/share/automake/install-sh missing -> /usr/share/automake/missing mkinstalldirs -> /usr/share/automake/mkinstalldirs

So compilation will work _only_ if you have automake installed.

Matthias

Signature · 10 lines
Clean custom Red Hat Linux rpm packages : http://freshrpms.net/
Red Hat Linux release 7.3 (Valhalla) running Linux kernel 2.4.18-10acpi
Load : 1.32 0.46 0.19


-------------------------------------------------------
This sf.net email is sponsored by: Influence the future 
of Java(TM) technology. Join the Java Community 
Process(SM) (JCP(SM)) program now. 
http://ads.sourceforge.net/cgi-bin/redirect.pl?sunm0002en
#2 lore raw

At Wed, 23 Oct 2002 16:50:03 +0200,

Quoted 9 lines · Matthias Saou
Quoted 6 lines · Wolfgang

I have a problem compiling alsa-utils-0.9.0rc4:

RedHat 8.0

./configure

Quoted 7 lines
Quoted 4 lines

creating cache ./config.cache
configure: error: can not find install-sh or install.sh in . ./.. ./../..

Any hint?

I see the same problem. In the tarball, there are links where scripts should have been copied. To fix in rc5 too?

yes. --copy option for automake was missing in cvscompile. should be fixed.

Takashi

-------------------------------------------------------
This sf.net email is sponsored by: Influence the future of Java(TM) technology. Join the Java Community Process(SM) (JCP(SM)) program now.
http://ads.sourceforge.net/cgi-bin/redirect.pl?sunm0002en

#3 lore raw

rates and frame-based formats

Hi,

There are some frame-based formats defined in asound.h and pcm.h. For full-rate GSM, frames are 260 bits every 20 ms. So my question is:
In such a case, should an application use (and the driver define) a rate of 50Hz, or the standard 8000Hz?

Thanks,
Guilhem.

__________________________________________________
Do you Yahoo!?
Y! Web Hosting - Let the expert host your web site
http://webhosting.yahoo.com/

-------------------------------------------------------
This sf.net email is sponsored by: Influence the future of Java(TM) technology. Join the Java Community Process(SM) (JCP(SM)) program now.
http://ads.sourceforge.net/cgi-bin/redirect.pl?sunm0002en

#4 lore raw

Re: rates and frame-based formats

Quoted 6 lines · Guilhem Tardy

Hi,

There are some frame-based formats defined in asound.h and pcm.h. For full-rate GSM, frames are 260 bits every 20 ms. So my question is:
In such a case, should an application use (and the driver define) a rate of 50Hz, or the standard 8000Hz?

This is very good question. We should make a decision. If we use 50Hz, we can easily calculate frames per second, otherwise we have to translate sampling rate to physical rate.. But it's the only good point which I see.

Also, the situation is very easy for GSM where the sampling rate is fixed, but what about some variable rate compressions with different sampling rate / physical rate ratio?

Jaroslav

-----
Jaroslav Kysela <[email protected]>
Linux Kernel Sound Maintainer
ALSA Project http://www.alsa-project.org
SuSE Linux http://www.suse.com

-------------------------------------------------------
This sf.net email is sponsored by: Influence the future of Java(TM) technology. Join the Java Community Process(SM) (JCP(SM)) program now.
http://ads.sourceforge.net/cgi-bin/redirect.pl?sunm0002en

#5 lore raw

Re: rates and frame-based formats

Quoted 3 lines

This is very good question. We should make a decision. If we use 50Hz, we can easily calculate frames per second, otherwise we have to translate sampling rate to physical rate.. But it's the only good point which I see.

I am not sure how you'd translate between the two? To me, one option is to define the number of samples per frame (which is 1 for all commonly used formats), and then:
physical rate = sampling rate / samples per frame

Is the rate actually used for scheduling purposes? Because otherwise there's no need for something like "physical rate".

Quoted 3 lines

Also, the situation is very easy for GSM where the sampling rate is fixed, but what about some variable rate compressions with different sampling rate / physical rate ratio?

Although variable rate compressions can be an issue, all formats that I can think of have a specific number of samples per frame (if you allow the fact that MPEG-1 layer I, II and III are different formats).

Usually, a finite number of physical widths per frame translate into their corresponding bit rates. But MPEG-1 layer III seems to be another beast by only defining an average bit rate.

Guilhem.

__________________________________________________
Do you Yahoo!?
Y! Web Hosting - Let the expert host your web site
http://webhosting.yahoo.com/

-------------------------------------------------------
This sf.net email is sponsored by: Influence the future of Java(TM) technology. Join the Java Community Process(SM) (JCP(SM)) program now.
http://ads.sourceforge.net/cgi-bin/redirect.pl?sunm0002en