yenta-cardbus IRQ0
i have been trying to set up a cardbus card on my thinkpad 760ED for about the last month and it keeps coming up with IRQ0 and telling me it cant find a irq for pin A. what would be causing this and how do I correct it i have already tried APCI and it does not work on my laptop so that is no help. I have compiled SMP into the kernel though I dont have a dual processor (of course) to gain the added functionality. I have recompiled my kernel about 150 times with different setting hoping it might just be a conflict in the kernel with no luck. I looked at the yenta driver it's self and noticed that it accepts IRQ0 as a valid irq but that appears to mean no irq at all. which config file would i use to force it to set a irq?
Thanx for any assistanc you might give
<quote who="Robert Bisping">
Quoted 11 lines
i have been trying to set up a cardbus card on my thinkpad 760ED for about the last month and it keeps coming up with IRQ0 and telling me it cant find a irq for pin A. what would be causing this and how do I correct it i have already tried APCI and it does not work on my laptop so that is no help. I have compiled SMP into the kernel though I dont have a dual processor (of course) to gain the added functionality. I have recompiled my kernel about 150 times with different setting hoping it might just be a conflict in the kernel with no luck. I looked at the yenta driver it's self and noticed that it accepts IRQ0 as a valid irq but that appears to mean no irq at all. which config file would i use to force it to set a irq?
Quoted 2 lines
Thanx for any assistanc you might give
plz send an lspci -vv -xxx -s *your dev*
what kernel are you using ?
Signature · 4 lines
Emiliano Gabrielli dip. di Fisica 2° Università di Roma "Tor Vergata"
Quoted 15 lines · you
<quote who="Robert Bisping">
Quoted 13 lines
i have been trying to set up a cardbus card on my thinkpad 760ED for about the last month and it keeps coming up with IRQ0 and telling me it cant find a irq for pin A. what would be causing this and how do I correct it i have already tried APCI and it does not work on my laptop so that is no help. I have compiled SMP into the kernel though I dont have a dual processor (of course) to gain the added functionality. I have recompiled my kernel about 150 times with different setting hoping it might just be a conflict in the kernel with no luck. I looked at the yenta driver it's self and noticed that it accepts IRQ0 as a valid irq but that appears to mean no irq at all. which config file would i use to force it to set a irq?
Quoted 5 lines
Quoted 1 line
Thanx for any assistanc you might give
plz send an lspci -vv -xxx -s *your dev*
what kernel are you using ?
i am using 2.4.18 and here is lspci
00:02.0 CardBus bridge: Texas Instruments PCI1130 (rev 04)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168, cache line size 08 Interrupt: pin A routed to IRQ 0 Region 0: Memory at 10812000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=01, subordinate=03, sec-latency=176 Memory window 0: 10000000-103ff000 (prefetchable) Memory window 1: 10400000-107ff000 I/O window 0: 00004000-000040ff I/O window 1: 00004400-000044ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001
00: 4c 10 12 ac 07 00 00 02 04 00 07 06 08 a8 82 00 10: 00 20 81 10 00 00 00 02 00 01 03 b0 00 00 00 10 20: 00 f0 3f 10 00 00 40 10 00 f0 7f 10 00 40 00 00 30: fc 40 00 00 00 44 00 00 fc 44 00 00 ff 01 c0 05 40: 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 20 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 83 72 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:02.1 CardBus bridge: Texas Instruments PCI1130 (rev 04)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168, cache line size 08 Interrupt: pin B routed to IRQ 0 Region 0: Memory at 10811000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=04, subordinate=06, sec-latency=176 Memory window 0: 10c00000-10fff000 (prefetchable) Memory window 1: 11000000-113ff000 I/O window 0: 00004800-000048ff I/O window 1: 00004c00-00004cff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001
00: 4c 10 12 ac 07 00 00 02 04 00 07 06 08 a8 82 00 10: 00 10 81 10 00 00 00 82 00 04 06 b0 00 00 c0 10 20: 00 f0 ff 10 00 00 00 11 00 f0 3f 11 00 48 00 00 30: fc 48 00 00 00 4c 00 00 fc 4c 00 00 ff 02 80 05 40: 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 33 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 20 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 82 72 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<quote who="Robert Bisping">
Quoted 15 lines · you
Quoted 14 lines
<quote who="Robert Bisping">
Quoted 1 line
i have been trying to set up a cardbus card on my thinkpad 760ED for about the
last month and it keeps coming up with IRQ0 and telling me it cant find a irq for pin A. what would be causing this and how do I correct it i have already tried APCI and it does not work on my laptop so that is no help. I have compiled SMP into the kernel though I dont have a dual processor (of course) to gain the added functionality. I have recompiled my kernel about 150 times with different setting hoping it might just be a conflict in the kernel with no luck. I looked at the yenta driver it's self and noticed that it accepts IRQ0 as a valid irq but that appears to mean no irq at all. which config file would i use to force it to set a irq?
Quoted 2 lines
Quoted 7 lines
Quoted 5 lines
Quoted 1 line
Thanx for any assistanc you might give
plz send an lspci -vv -xxx -s *your dev*
what kernel are you using ?
i am using 2.4.18 and here is lspci
uhmm, 1th try to upgrade to a newer one, then I experienced the same problem with a custom board... the problem was triggered by the Base Address too high:
Region 0: Memory at 10812000 (32-bit, non-prefetchable) [size=4K]
moving id_sel (in the PCI core of the board) in order to obtain a lower bar all worked.
BTW, has anybody there ever heared about such a costraint in the PCI specification ?? Why I got this strange behaviour ???
Signature · 4 lines
Emiliano Gabrielli dip. di Fisica 2° Università di Roma "Tor Vergata"
Quoted 31 lines · Emiliano Gabrielli
<quote who="Robert Bisping">
Quoted 17 lines · you
Quoted 16 lines
<quote who="Robert Bisping">
Quoted 2 lines
i have been trying to set up a cardbus card on my thinkpad 760ED for about the
last month and it keeps coming up with IRQ0 and telling me it cant find a irq for pin A. what would be causing this and how do I correct it i have already tried APCI and it does not work on my laptop so that is no help. I have compiled SMP into the kernel though I dont have a dual processor (of course) to gain the added functionality. I have recompiled my kernel about 150 times with different setting hoping it might just be a conflict in the kernel with no luck. I looked at the yenta driver it's self and noticed that it accepts IRQ0 as a valid irq but that appears to mean no irq at all. which config file would i use to force it to set a irq?
Quoted 7 lines
Quoted 5 lines
Quoted 1 line
Thanx for any assistanc you might give
plz send an lspci -vv -xxx -s *your dev*
what kernel are you using ?
i am using 2.4.18 and here is lspci
uhmm, 1th try to upgrade to a newer one, then I experienced the same problem with a custom board... the problem was triggered by the Base Address too high:
Quoted 8 lines
Region 0: Memory at 10812000 (32-bit, non-prefetchable) [size=4K]
moving
id_sel(in the PCI core of the board) in order to obtain a lower bar all worked.BTW, has anybody there ever heared about such a costraint in the PCI specification ?? Why I got this strange behaviour ???
ok, can you give me some more specifics? i.e how do i do that or what howto/man etc. (not the kernel part the id_sel part) thanx
Quoted 29 lines · Robert Bisping
Quoted 29 lines
Quoted 11 lines
Quoted 11 lines
last month and it keeps coming up with IRQ0 and telling me it cant find a irq for pin A. what would be causing this and how do I correct it i have already tried APCI and it does not work on my laptop so that is no help. I have compiled SMP into the kernel though I dont have a dual processor (of course) to gain the added functionality. I have recompiled my kernel about 150 times with different setting hoping it might just be a conflict in the kernel with no luck. I looked at the yenta driver it's self and noticed that it accepts IRQ0 as a valid irq but that appears to mean no irq at all. which config file would i use to force it to set a irq?
Quoted 7 lines
Quoted 5 lines
Quoted 1 line
Thanx for any assistanc you might give
plz send an lspci -vv -xxx -s *your dev*
what kernel are you using ?
i am using 2.4.18 and here is lspci
uhmm, 1th try to upgrade to a newer one, then I experienced the same problem with a custom board... the problem was triggered by the Base Address too high:
Region 0: Memory at 10812000 (32-bit, non-prefetchable) [size=4K]
moving
id_sel(in the PCI core of the board) in order to obtain a lower bar all worked.
Quoted 5 lines
Quoted 2 lines
BTW, has anybody there ever heared about such a costraint in the PCI specification ?? Why I got this strange behaviour ???
ok, can you give me some more specifics? i.e how do i do that or what howto/man etc. (not the kernel part the
id_selpart) thanx
I think you can't do that if you are not able to put your hand in the HW. There's nothing you can do from linux, that I know...
You can take a look to the PCI specification, but i don't think it will aid you so much...
Signature · 4 lines
Emiliano Gabrielli dip. di Fisica 2° Università di Roma "Tor Vergata"
Quoted 33 lines · you
Quoted 32 lines · Robert Bisping
Quoted 31 lines
Quoted 11 lines
Quoted 11 lines
last month and it keeps coming up with IRQ0 and telling me it cant find a irq for pin A. what would be causing this and how do I correct it i have already tried APCI and it does not work on my laptop so that is no help. I have compiled SMP into the kernel though I dont have a dual processor (of course) to gain the added functionality. I have recompiled my kernel about 150 times with different setting hoping it might just be a conflict in the kernel with no luck. I looked at the yenta driver it's self and noticed that it accepts IRQ0 as a valid irq but that appears to mean no irq at all. which config file would i use to force it to set a irq?
Quoted 7 lines
Quoted 5 lines
Quoted 1 line
Thanx for any assistanc you might give
plz send an lspci -vv -xxx -s *your dev*
what kernel are you using ?
i am using 2.4.18 and here is lspci
uhmm, 1th try to upgrade to a newer one, then I experienced the same problem with a custom board... the problem was triggered by the Base Address too high:
Region 0: Memory at 10812000 (32-bit, non-prefetchable) [size=4K]
moving
id_sel(in the PCI core of the board) in order to obtain a lower bar all worked.BTW, has anybody there ever heared about such a costraint in the PCI specification ?? Why I got this strange behaviour ???
Quoted 8 lines
Quoted 2 lines
ok, can you give me some more specifics? i.e how do i do that or what howto/man etc. (not the kernel part the
id_selpart) thanxI think you can't do that if you are not able to put your hand in the HW. There's nothing you can do from linux, that I know...
You can take a look to the PCI specification, but i don't think it will aid you so much...
when I reformated my drive for linux i lost the ibm configuration utilities for windows and havent been able to get them back any other suggestions or how do i get to the bios froma floppy with a thinkpad 760ed.
thanx