Skip to contentSkip to conversation

yenta-cardbus IRQ0

DISCUSSION Robert Bisping 2 participants 7 messages Jan 31, 2003 – Feb 4, 2003

lore
Share & tools
lore
#0 lore raw

i have been trying to set up a cardbus card on my thinkpad 760ED for about the last month and it keeps coming up with IRQ0 and telling me it cant find a irq for pin A. what would be causing this and how do I correct it i have already tried APCI and it does not work on my laptop so that is no help. I have compiled SMP into the kernel though I dont have a dual processor (of course) to gain the added functionality. I have recompiled my kernel about 150 times with different setting hoping it might just be a conflict in the kernel with no luck. I looked at the yenta driver it's self and noticed that it accepts IRQ0 as a valid irq but that appears to mean no irq at all. which config file would i use to force it to set a irq?

Thanx for any assistanc you might give

#1 lore raw

<quote who="Robert Bisping">

Quoted 11 lines

i have been trying to set up a cardbus card on my thinkpad 760ED for about the last month and it keeps coming up with IRQ0 and telling me it cant find a irq for pin A. what would be causing this and how do I correct it i have already tried APCI and it does not work on my laptop so that is no help. I have compiled SMP into the kernel though I dont have a dual processor (of course) to gain the added functionality. I have recompiled my kernel about 150 times with different setting hoping it might just be a conflict in the kernel with no luck. I looked at the yenta driver it's self and noticed that it accepts IRQ0 as a valid irq but that appears to mean no irq at all. which config file would i use to force it to set a irq?

Quoted 2 lines

Thanx for any assistanc you might give

plz send an lspci -vv -xxx -s *your dev*

what kernel are you using ?

Signature · 4 lines
Emiliano Gabrielli

dip. di Fisica
2° Università di Roma "Tor Vergata"
#2 lore raw
Quoted 15 lines · you

<quote who="Robert Bisping">

Quoted 13 lines

i have been trying to set up a cardbus card on my thinkpad 760ED for about the last month and it keeps coming up with IRQ0 and telling me it cant find a irq for pin A. what would be causing this and how do I correct it i have already tried APCI and it does not work on my laptop so that is no help. I have compiled SMP into the kernel though I dont have a dual processor (of course) to gain the added functionality. I have recompiled my kernel about 150 times with different setting hoping it might just be a conflict in the kernel with no luck. I looked at the yenta driver it's self and noticed that it accepts IRQ0 as a valid irq but that appears to mean no irq at all. which config file would i use to force it to set a irq?

Quoted 5 lines
Quoted 1 line

Thanx for any assistanc you might give

plz send an lspci -vv -xxx -s *your dev*

what kernel are you using ?

i am using 2.4.18 and here is lspci

00:02.0 CardBus bridge: Texas Instruments PCI1130 (rev 04)

	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 168, cache line size 08
	Interrupt: pin A routed to IRQ 0
	Region 0: Memory at 10812000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=00, secondary=01, subordinate=03, sec-latency=176
	Memory window 0: 10000000-103ff000 (prefetchable)
	Memory window 1: 10400000-107ff000
	I/O window 0: 00004000-000040ff
	I/O window 1: 00004400-000044ff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001

00: 4c 10 12 ac 07 00 00 02 04 00 07 06 08 a8 82 00 10: 00 20 81 10 00 00 00 02 00 01 03 b0 00 00 00 10 20: 00 f0 3f 10 00 00 40 10 00 f0 7f 10 00 40 00 00 30: fc 40 00 00 00 44 00 00 fc 44 00 00 ff 01 c0 05 40: 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 20 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 83 72 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:02.1 CardBus bridge: Texas Instruments PCI1130 (rev 04)

	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 168, cache line size 08
	Interrupt: pin B routed to IRQ 0
	Region 0: Memory at 10811000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=00, secondary=04, subordinate=06, sec-latency=176
	Memory window 0: 10c00000-10fff000 (prefetchable)
	Memory window 1: 11000000-113ff000
	I/O window 0: 00004800-000048ff
	I/O window 1: 00004c00-00004cff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001

00: 4c 10 12 ac 07 00 00 02 04 00 07 06 08 a8 82 00 10: 00 10 81 10 00 00 00 82 00 04 06 b0 00 00 c0 10 20: 00 f0 ff 10 00 00 00 11 00 f0 3f 11 00 48 00 00 30: fc 48 00 00 00 4c 00 00 fc 4c 00 00 ff 02 80 05 40: 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 33 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 20 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 82 72 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

#3 lore raw

<quote who="Robert Bisping">

Quoted 15 lines · you
Quoted 14 lines

<quote who="Robert Bisping">

Quoted 1 line

i have been trying to set up a cardbus card on my thinkpad 760ED for about the

last month and it keeps coming up with IRQ0 and telling me it cant find a irq for pin A. what would be causing this and how do I correct it i have already tried APCI and it does not work on my laptop so that is no help. I have compiled SMP into the kernel though I dont have a dual processor (of course) to gain the added functionality. I have recompiled my kernel about 150 times with different setting hoping it might just be a conflict in the kernel with no luck. I looked at the yenta driver it's self and noticed that it accepts IRQ0 as a valid irq but that appears to mean no irq at all. which config file would i use to force it to set a irq?

Quoted 2 lines
Quoted 7 lines
Quoted 5 lines
Quoted 1 line

Thanx for any assistanc you might give

plz send an lspci -vv -xxx -s *your dev*

what kernel are you using ?

i am using 2.4.18 and here is lspci

uhmm, 1th try to upgrade to a newer one, then I experienced the same problem with a custom board... the problem was triggered by the Base Address too high:

Region 0: Memory at 10812000 (32-bit, non-prefetchable) [size=4K]

moving id_sel (in the PCI core of the board) in order to obtain a lower bar all worked.

BTW, has anybody there ever heared about such a costraint in the PCI specification ?? Why I got this strange behaviour ???

Signature · 4 lines
Emiliano Gabrielli

dip. di Fisica
2° Università di Roma "Tor Vergata"
#4 lore raw
Quoted 31 lines · Emiliano Gabrielli

<quote who="Robert Bisping">

Quoted 17 lines · you
Quoted 16 lines

<quote who="Robert Bisping">

Quoted 2 lines

i have been trying to set up a cardbus card on my thinkpad 760ED for about the

last month and it keeps coming up with IRQ0 and telling me it cant find a irq for pin A. what would be causing this and how do I correct it i have already tried APCI and it does not work on my laptop so that is no help. I have compiled SMP into the kernel though I dont have a dual processor (of course) to gain the added functionality. I have recompiled my kernel about 150 times with different setting hoping it might just be a conflict in the kernel with no luck. I looked at the yenta driver it's self and noticed that it accepts IRQ0 as a valid irq but that appears to mean no irq at all. which config file would i use to force it to set a irq?

Quoted 7 lines
Quoted 5 lines
Quoted 1 line

Thanx for any assistanc you might give

plz send an lspci -vv -xxx -s *your dev*

what kernel are you using ?

i am using 2.4.18 and here is lspci

uhmm, 1th try to upgrade to a newer one, then I experienced the same problem with a custom board... the problem was triggered by the Base Address too high:

Quoted 8 lines

Region 0: Memory at 10812000 (32-bit, non-prefetchable) [size=4K]

moving id_sel (in the PCI core of the board) in order to obtain a lower bar all worked.

BTW, has anybody there ever heared about such a costraint in the PCI specification ?? Why I got this strange behaviour ???

ok, can you give me some more specifics? i.e how do i do that or what howto/man etc. (not the kernel part the id_sel part) thanx

#5 lore raw
Quoted 29 lines · Robert Bisping
Quoted 29 lines
Quoted 11 lines
Quoted 11 lines

last month and it keeps coming up with IRQ0 and telling me it cant find a irq for pin A. what would be causing this and how do I correct it i have already tried APCI and it does not work on my laptop so that is no help. I have compiled SMP into the kernel though I dont have a dual processor (of course) to gain the added functionality. I have recompiled my kernel about 150 times with different setting hoping it might just be a conflict in the kernel with no luck. I looked at the yenta driver it's self and noticed that it accepts IRQ0 as a valid irq but that appears to mean no irq at all. which config file would i use to force it to set a irq?

Quoted 7 lines
Quoted 5 lines
Quoted 1 line

Thanx for any assistanc you might give

plz send an lspci -vv -xxx -s *your dev*

what kernel are you using ?

i am using 2.4.18 and here is lspci

uhmm, 1th try to upgrade to a newer one, then I experienced the same problem with a custom board... the problem was triggered by the Base Address too high:

Region 0: Memory at 10812000 (32-bit, non-prefetchable) [size=4K]

moving id_sel (in the PCI core of the board) in order to obtain a lower bar all worked.

Quoted 5 lines
Quoted 2 lines

BTW, has anybody there ever heared about such a costraint in the PCI specification ?? Why I got this strange behaviour ???

ok, can you give me some more specifics? i.e how do i do that or what howto/man etc. (not the kernel part the id_sel part) thanx

I think you can't do that if you are not able to put your hand in the HW. There's nothing you can do from linux, that I know...

You can take a look to the PCI specification, but i don't think it will aid you so much...

Signature · 4 lines
Emiliano Gabrielli

dip. di Fisica
2° Università di Roma "Tor Vergata"
#6 lore raw
Quoted 33 lines · you
Quoted 32 lines · Robert Bisping
Quoted 31 lines
Quoted 11 lines
Quoted 11 lines

last month and it keeps coming up with IRQ0 and telling me it cant find a irq for pin A. what would be causing this and how do I correct it i have already tried APCI and it does not work on my laptop so that is no help. I have compiled SMP into the kernel though I dont have a dual processor (of course) to gain the added functionality. I have recompiled my kernel about 150 times with different setting hoping it might just be a conflict in the kernel with no luck. I looked at the yenta driver it's self and noticed that it accepts IRQ0 as a valid irq but that appears to mean no irq at all. which config file would i use to force it to set a irq?

Quoted 7 lines
Quoted 5 lines
Quoted 1 line

Thanx for any assistanc you might give

plz send an lspci -vv -xxx -s *your dev*

what kernel are you using ?

i am using 2.4.18 and here is lspci

uhmm, 1th try to upgrade to a newer one, then I experienced the same problem with a custom board... the problem was triggered by the Base Address too high:

Region 0: Memory at 10812000 (32-bit, non-prefetchable) [size=4K]

moving id_sel (in the PCI core of the board) in order to obtain a lower bar all worked.

BTW, has anybody there ever heared about such a costraint in the PCI specification ?? Why I got this strange behaviour ???

Quoted 8 lines
Quoted 2 lines

ok, can you give me some more specifics? i.e how do i do that or what howto/man etc. (not the kernel part the id_sel part) thanx

I think you can't do that if you are not able to put your hand in the HW. There's nothing you can do from linux, that I know...

You can take a look to the PCI specification, but i don't think it will aid you so much...

when I reformated my drive for linux i lost the ibm configuration utilities for windows and havent been able to get them back any other suggestions or how do i get to the bios froma floppy with a thinkpad 760ed.

thanx