Problems with hyper-threading on Asus P4T533 / Linux 2.4.20
We've just gotten an Asus P4T533-based machine with a 3.06GHz P4 CPU, bios version 1005. (P4T533 is i850e-based.) The bios claims that the P4 has hyper-threading, and as you can see from the cpuinfo output below, "ht" is among the flags. (And the manual says that P4T533 is ht-enabled.)
I've tried booting with acpismp=force and without, and it doesn't seem to make much difference: Linux still only sees a single CPU. I've also tried 2.4.21-pre4 and -ac4, which doesn't seem to make any difference, either.
Anybody got any ideas why I can't get this to work?
buto:~# uname -a Linux buto 2.4.20 #3 SMP Wed Feb 12 14:28:49 CET 2003 i686 unknown buto:~# cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) Pentium(R) 4 CPU 3.06GHz stepping : 7 cpu MHz : 3073.691 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm bogomips : 6134.16
Signature · 2 lines
(domestic pets only, the antidote for overdose, milk.) [email protected] * Lars Magne Ingebrigtsen
Quoted 26 lines · On Wed, 12 Feb 2003 15:03:59 +0100 Lars Magne Ingebrigtsen <[email protected]>…
We've just gotten an Asus P4T533-based machine with a 3.06GHz P4 CPU, bios version 1005. (P4T533 is i850e-based.) The bios claims that the P4 has hyper-threading, and as you can see from the cpuinfo output below, "ht" is among the flags. (And the manual says that P4T533 is ht-enabled.)
I've tried booting with acpismp=force and without, and it doesn't seem to make much difference: Linux still only sees a single CPU. I've also tried 2.4.21-pre4 and -ac4, which doesn't seem to make any difference, either.
Anybody got any ideas why I can't get this to work?
buto:~# uname -a Linux buto 2.4.20 #3 SMP Wed Feb 12 14:28:49 CET 2003 i686 unknown buto:~# cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) Pentium(R) 4 CPU 3.06GHz stepping : 7 cpu MHz : 3073.691 cache size : 512 KB fdiv_bug : no hlt_bug : no
Quoted 8 lines
f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm bogomips : 6134.16
Thats sounds alright, you have to have an SMP kernel to use HT. Build a new kernel with the SMP option checked. After that, you will see something like this with all that is above :
siblings : 2
And cpuinfo will show info for 2 processors...