Skip to contentSkip to conversation

Problems with hyper-threading on Asus P4T533 / Linux 2.4.20

DISCUSSION Lars Magne Ingebrigtsen 2 participants 2 messages Feb 12, 2003

lore
Share & tools
lore
#0 lore raw

We've just gotten an Asus P4T533-based machine with a 3.06GHz P4 CPU, bios version 1005. (P4T533 is i850e-based.) The bios claims that the P4 has hyper-threading, and as you can see from the cpuinfo output below, "ht" is among the flags. (And the manual says that P4T533 is ht-enabled.)

I've tried booting with acpismp=force and without, and it doesn't seem to make much difference: Linux still only sees a single CPU. I've also tried 2.4.21-pre4 and -ac4, which doesn't seem to make any difference, either.

Anybody got any ideas why I can't get this to work?

buto:~# uname -a
Linux buto 2.4.20 #3 SMP Wed Feb 12 14:28:49 CET 2003 i686 unknown
buto:~# cat /proc/cpuinfo 
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 15
model           : 2
model name      : Intel(R) Pentium(R) 4 CPU 3.06GHz
stepping        : 7
cpu MHz         : 3073.691
cache size      : 512 KB
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 2
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm
bogomips        : 6134.16
Signature · 2 lines
(domestic pets only, the antidote for overdose, milk.)
   [email protected] * Lars Magne Ingebrigtsen
#1 lore raw
Quoted 26 lines · On Wed, 12 Feb 2003 15:03:59 +0100 Lars Magne Ingebrigtsen <[email protected]>…

We've just gotten an Asus P4T533-based machine with a 3.06GHz P4 CPU, bios version 1005. (P4T533 is i850e-based.) The bios claims that the P4 has hyper-threading, and as you can see from the cpuinfo output below, "ht" is among the flags. (And the manual says that P4T533 is ht-enabled.)

I've tried booting with acpismp=force and without, and it doesn't seem to make much difference: Linux still only sees a single CPU. I've also tried 2.4.21-pre4 and -ac4, which doesn't seem to make any difference, either.

Anybody got any ideas why I can't get this to work?

buto:~# uname -a
Linux buto 2.4.20 #3 SMP Wed Feb 12 14:28:49 CET 2003 i686 unknown
buto:~# cat /proc/cpuinfo 
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 15
model           : 2
model name      : Intel(R) Pentium(R) 4 CPU 3.06GHz
stepping        : 7
cpu MHz         : 3073.691
cache size      : 512 KB
fdiv_bug        : no
hlt_bug         : no
Quoted 8 lines
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 2
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm
bogomips        : 6134.16

Thats sounds alright, you have to have an SMP kernel to use HT. Build a new kernel with the SMP option checked. After that, you will see something like this with all that is above :
siblings : 2

And cpuinfo will show info for 2 processors...