DTE 3181e
Hi!
I am trying to use an ancient DTC 3181e SCSI card with the 2.4.20 kernel. However, whenever I load the g_NCR5380 module with a SCSI device on, it inmediately freezes the computer hard. The system gets completely hung, needs a hard reset to restart (no Alt-SysRq magic keys available).
I've been looking for information on the Net, but I could not find anybody with similar problems.
Does anyone have current information about this card/driver combination? Or whom I could reach to ask questions about the driver?
Please CC to me, as I am not subcribed to the list if you have information.
Thank you very much!
Bye & Good Luck!
Pablo B.
------------
¡Internet GRATIS es Yahoo! Conexión!
Usuario "yahoo", contraseña "yahoo".
Desde Buenos Aires, 4004-1010.
Otras ciudades: http://conexion.yahoo.com.ar/avanzados.html
Quoted 8 lines · Pablo B
I am trying to use an ancient DTC 3181e SCSI card with the 2.4.20 kernel. However, whenever I load the
g_NCR5380module with a SCSI device on, it inmediately freezes the computer hard. The system gets completely hung, needs a hard reset to restart (no Alt-SysRq magic keys available).
I've been looking for information on the Net, but I could not find anybody with similar problems.
The driver is a bit cranky to say the least. It gets deeply upset if the bus locks for example. I did a lot of work on it in 2.5 and the 2.5 one seems to be stable and a lot better on my test box with a similar card (53c400a with no IRQ)
Quoted 9 lines · Pablo B
I am trying to use an ancient DTC 3181e SCSI card with the 2.4.20 kernel. However, whenever I load the
g_NCR5380module with a SCSI device on, it inmediately freezes the computer hard. The system gets completely hung, needs a hard reset to restart (no Alt-SysRq magic keys available).
I've been looking for information on the Net, but I could not find anybody with similar problems.
Quoted 3 lines
Does anyone have current information about this card/driver combination? Or whom I could reach to ask questions about the driver?
If I recall correctly (I sold my DTC-3181E), you need to use the sym53c400 driver with dtc3181e= option (check the sym53c400 code or README in drivers/scsi/ for the exact syntax), not the g_NCR5380 driver.
It used to work for me, but I don't recall which kernel version, likely 2.2.18 or something.
Better get a real adaptor if you have a spare PCI slot though... the DTC-3181E doesn't do DMA as far as I know and will hardly exploit the Fast-SCSI bandwidth to the full extent: ISA is the bottle's neck.
Signature · 1 line
Matthias Andree