Skip to contentSkip to conversation

DTE 3181e

DISCUSSION Pablo B 3 participants 3 messages Feb 26, 2003 – Feb 27, 2003

lore
Share & tools
lore

Pablo B

author
#0 lore raw

Hi!

I am trying to use an ancient DTC 3181e SCSI card with the 2.4.20 kernel. However, whenever I load the g_NCR5380 module with a SCSI device on, it inmediately freezes the computer hard. The system gets completely hung, needs a hard reset to restart (no Alt-SysRq magic keys available).
I've been looking for information on the Net, but I could not find anybody with similar problems.

Does anyone have current information about this card/driver combination? Or whom I could reach to ask questions about the driver?

Please CC to me, as I am not subcribed to the list if you have information.

Thank you very much!

Bye & Good Luck!

Pablo B.

------------
¡Internet GRATIS es Yahoo! Conexión!
Usuario "yahoo", contraseña "yahoo".
Desde Buenos Aires, 4004-1010.
Otras ciudades: http://conexion.yahoo.com.ar/avanzados.html

#1 lore raw
Quoted 8 lines · Pablo B

I am trying to use an ancient DTC 3181e SCSI card with the 2.4.20 kernel. However, whenever I load the g_NCR5380 module with a SCSI device on, it inmediately freezes the computer hard. The system gets completely hung, needs a hard reset to restart (no Alt-SysRq magic keys available).
I've been looking for information on the Net, but I could not find anybody with similar problems.

The driver is a bit cranky to say the least. It gets deeply upset if the bus locks for example. I did a lot of work on it in 2.5 and the 2.5 one seems to be stable and a lot better on my test box with a similar card (53c400a with no IRQ)

#2 lore raw
In reply to Pablo B
Quoted 9 lines · Pablo B

I am trying to use an ancient DTC 3181e SCSI card with the 2.4.20 kernel. However, whenever I load the g_NCR5380 module with a SCSI device on, it inmediately freezes the computer hard. The system gets completely hung, needs a hard reset to restart (no Alt-SysRq magic keys available).
I've been looking for information on the Net, but I could not find anybody with similar problems.

Quoted 3 lines

Does anyone have current information about this card/driver combination? Or whom I could reach to ask questions about the driver?

If I recall correctly (I sold my DTC-3181E), you need to use the sym53c400 driver with dtc3181e= option (check the sym53c400 code or README in drivers/scsi/ for the exact syntax), not the g_NCR5380 driver.

It used to work for me, but I don't recall which kernel version, likely 2.2.18 or something.

Better get a real adaptor if you have a spare PCI slot though... the DTC-3181E doesn't do DMA as far as I know and will hardly exploit the Fast-SCSI bandwidth to the full extent: ISA is the bottle's neck.

Signature · 1 line
Matthias Andree