2.5.65: 3C905 driver doesn't work.
Hi,
2.5.65 doesn't connect to my network via my network card:
00:0b.0 Ethernet controller: 3Com Corporation 3c905 100BaseTX [Boomerang]
My switch does show a link, but the dhcpcd negotiation fails, and no activity is shown.
All kernel logs look normal, no errors, card is detected correctly.
My configuration is attached.
Jos
Quoted 8 lines · Jos Hulzink
2.5.65 doesn't connect to my network via my network card:
00:0b.0 Ethernet controller: 3Com Corporation 3c905 100BaseTX [Boomerang]
My switch does show a link, but the dhcpcd negotiation fails, and no activity is shown.
All kernel logs look normal, no errors, card is detected correctly.
try booting with..
"acpi=off"
"noapic"
"acpi=off noapic"
For me, the third one gets it working again on two boxes. Without that, packets are sent, but nothing is ever recieved.
Dave
Quoted 11 lines · Dave Jones
Quoted 8 lines · Jos Hulzink
2.5.65 doesn't connect to my network via my network card:
00:0b.0 Ethernet controller: 3Com Corporation 3c905 100BaseTX [Boomerang]
My switch does show a link, but the dhcpcd negotiation fails, and no activity is shown.
All kernel logs look normal, no errors, card is detected correctly.
Quoted 8 lines
try booting with..
"acpi=off"
"noapic"
"acpi=off noapic"For me, the third one gets it working again on two boxes. Without that, packets are sent, but nothing is ever recieved.
For me, the third option results in a kernel panic very early during boot :( I'm trying to get more info out of it.
Other options untested yet.
Jos
Quoted 5 lines · Jos Hulzink
Quoted 3 lines
"acpi=off noapic"
For me, the third one gets it working again on two boxes. Without that, packets are sent, but nothing is ever recieved.For me, the third option results in a kernel panic very early during boot :( I'm trying to get more info out of it.
Interesting, can you post that panic ?
Dave
Quoted 11 lines · Dave Jones
Quoted 8 lines · Jos Hulzink
Quoted 3 lines
"acpi=off noapic"
For me, the third one gets it working again on two boxes. Without that, packets are sent, but nothing is ever recieved.For me, the third option results in a kernel panic very early during boot
:( I'm trying to get more info out of it.
Interesting, can you post that panic ?
Located, caused by a magically jumped back Processor setting (P4 code doesn't work on P2)
Jos
Quoted 11 lines · Dave Jones
Quoted 9 lines · Jos Hulzink
2.5.65 doesn't connect to my network via my network card:
00:0b.0 Ethernet controller: 3Com Corporation 3c905 100BaseTX [Boomerang]
My switch does show a link, but the dhcpcd negotiation fails, and no activity is shown.
All kernel logs look normal, no errors, card is detected correctly.
Quoted 8 lines
try booting with..
"acpi=off"
"noapic"
"acpi=off noapic"For me, the third one gets it working again on two boxes. Without that, packets are sent, but nothing is ever recieved.
Okay, this indeed works for me too.
Interesting is this:
MPS 1.4 disabled in BIOS (no irq rerouting table in memory), acpi enabled in kernel, apic on: 3Com module tries to claim IRQ 0, which is of course incorrect.
the IRQ rerouting causes trouble for my SCSI card too, I guess we're still a long way from usable ACPI and APIC :( If I can be of any help to test things, please let me know.
Jos