Skip to contentSkip to conversation

2.5.65: 3C905 driver doesn't work.

DISCUSSION Jos Hulzink 2 participants 6 messages Mar 21, 2003 – Mar 23, 2003

lore
Share & tools
lore
#0 lore raw

Hi,

2.5.65 doesn't connect to my network via my network card:

00:0b.0 Ethernet controller: 3Com Corporation 3c905 100BaseTX [Boomerang]

My switch does show a link, but the dhcpcd negotiation fails, and no activity is shown.

All kernel logs look normal, no errors, card is detected correctly.

My configuration is attached.

Jos

#1 lore raw
Quoted 8 lines · Jos Hulzink

2.5.65 doesn't connect to my network via my network card:

00:0b.0 Ethernet controller: 3Com Corporation 3c905 100BaseTX [Boomerang]

My switch does show a link, but the dhcpcd negotiation fails, and no activity is shown.

All kernel logs look normal, no errors, card is detected correctly.

try booting with..
"acpi=off"
"noapic"
"acpi=off noapic"

For me, the third one gets it working again on two boxes. Without that, packets are sent, but nothing is ever recieved.

Dave

#2 lore raw
Quoted 11 lines · Dave Jones
Quoted 8 lines · Jos Hulzink

2.5.65 doesn't connect to my network via my network card:

00:0b.0 Ethernet controller: 3Com Corporation 3c905 100BaseTX [Boomerang]

My switch does show a link, but the dhcpcd negotiation fails, and no activity is shown.

All kernel logs look normal, no errors, card is detected correctly.

Quoted 8 lines

try booting with..
"acpi=off"
"noapic"
"acpi=off noapic"

For me, the third one gets it working again on two boxes. Without that, packets are sent, but nothing is ever recieved.

For me, the third option results in a kernel panic very early during boot :( I'm trying to get more info out of it.

Other options untested yet.

Jos

#3 lore raw
Quoted 5 lines · Jos Hulzink
Quoted 3 lines

"acpi=off noapic"
For me, the third one gets it working again on two boxes. Without that, packets are sent, but nothing is ever recieved.

For me, the third option results in a kernel panic very early during boot :( I'm trying to get more info out of it.

Interesting, can you post that panic ?

Dave

#5 lore raw
In reply to Dave Jones
Quoted 11 lines · Dave Jones
Quoted 9 lines · Jos Hulzink

2.5.65 doesn't connect to my network via my network card:

00:0b.0 Ethernet controller: 3Com Corporation 3c905 100BaseTX [Boomerang]

My switch does show a link, but the dhcpcd negotiation fails, and no activity is shown.

All kernel logs look normal, no errors, card is detected correctly.

Quoted 8 lines

try booting with..
"acpi=off"
"noapic"
"acpi=off noapic"

For me, the third one gets it working again on two boxes. Without that, packets are sent, but nothing is ever recieved.

Okay, this indeed works for me too.

Interesting is this:

MPS 1.4 disabled in BIOS (no irq rerouting table in memory), acpi enabled in kernel, apic on: 3Com module tries to claim IRQ 0, which is of course incorrect.

the IRQ rerouting causes trouble for my SCSI card too, I guess we're still a long way from usable ACPI and APIC :( If I can be of any help to test things, please let me know.

Jos

#4 lore raw
In reply to Dave Jones
Quoted 11 lines · Dave Jones
Quoted 8 lines · Jos Hulzink
Quoted 3 lines

"acpi=off noapic"
For me, the third one gets it working again on two boxes. Without that, packets are sent, but nothing is ever recieved.

For me, the third option results in a kernel panic very early during boot

:( I'm trying to get more info out of it.

Interesting, can you post that panic ?

Located, caused by a magically jumped back Processor setting (P4 code doesn't work on P2)

Jos