SiS7012 hang alsa version 0.9.3c
Hi,
Quoted 1 line
From the soundcard matrix 'Details' link :
http://alsa-project.org/alsa-doc/doc-php/template.php3?company=SiS&card=&chip=ad1816a&module=intel8x0
it seems this is supported in the 'intel8x0' driver.
When I try to load the intel alsa module I get a hang state, with this output :
PCI: Enabling device 00:02.7 (0000 -> 0001)
PCI: No IRQ known for interrupt pin C of device 00:02.7. Please try using pci=biosirq.
ALSA ../alsa-kernel/pci/intel8x0.c:2249: unable to grab IRQ 0
So I appended that to the lilo.conf file and ran lilo, upon reboot - same problem.
Any wise tips, or ... anything ???
Matt
Signature · 13 lines
http://mffm.ee.unsw.edu.au WSOLA TimeScale Audio Mod : http://mffmtimescale.sourceforge.net/ FFTw C++ : http://mffmfftwrapper.sourceforge.net/ Vector Bass : http://mffmvectorbass.sourceforge.net/ Multimedia Time Code : http://mffmtimecode.sourceforge.net/ ------------------------------------------------------- This SF.net email is sponsored by: ObjectStore. If flattening out C++ or Java code to make your application fit in a relational database is painful, don't do it! Check out ObjectStore. Now part of Progress Software. http://www.objectstore.net/sourceforge
Hello again,
It would seem this has been seem before ...
http://www.mail-archive.com/[email protected]/msg04601.html
But there was no solution at the end of the thread ... I run kernel version 2.4.20
Perhaps I require a newer kernel version as well ?
Matt
Quoted 27 lines · flatmax
Hi,
From the soundcard matrix 'Details' link :
http://alsa-project.org/alsa-doc/doc-php/template.php3?company=SiS&card=&chip=ad1816a&module=intel8x0
it seems this is supported in the 'intel8x0' driver.When I try to load the intel alsa module I get a hang state, with this output :
PCI: Enabling device 00:02.7 (0000 -> 0001)
PCI: No IRQ known for interrupt pin C of device 00:02.7. Please try using pci=biosirq.
ALSA../alsa-kernel/pci/intel8x0.c:2249: unable to grab IRQ 0So I appended that to the lilo.conf file and ran lilo, upon reboot - same problem.
Any wise tips, or ... anything ???
Matt
Signature · 6 lines
http://mffm.ee.unsw.edu.au WSOLA TimeScale Audio Mod : http://mffmtimescale.sourceforge.net/ FFTw C++ : http://mffmfftwrapper.sourceforge.net/ Vector Bass : http://mffmvectorbass.sourceforge.net/ Multimedia Time Code : http://mffmtimecode.sourceforge.net/
Signature · 13 lines
http://mffm.ee.unsw.edu.au WSOLA TimeScale Audio Mod : http://mffmtimescale.sourceforge.net/ FFTw C++ : http://mffmfftwrapper.sourceforge.net/ Vector Bass : http://mffmvectorbass.sourceforge.net/ Multimedia Time Code : http://mffmtimecode.sourceforge.net/ ------------------------------------------------------- This SF.net email is sponsored by: ObjectStore. If flattening out C++ or Java code to make your application fit in a relational database is painful, don't do it! Check out ObjectStore. Now part of Progress Software. http://www.objectstore.net/sourceforge
Quoted 9 lines · Matt Flax
When I try to load the intel alsa module I get a hang state, with this output :
PCI: Enabling device 00:02.7 (0000 -> 0001)
PCI: No IRQ known for interrupt pin C of device 00:02.7. Please try using pci=biosirq.
ALSA../alsa-kernel/pci/intel8x0.c:2249: unable to grab IRQ 0So I appended that to the lilo.conf file and ran lilo, upon reboot - same problem.
Apparently, your BIOS didn't allocate an interrupt for the AC'97 device. Try changing some PnP-related settings in the BIOS setup.
HTH
Clemens
-------------------------------------------------------
This SF.net email is sponsored by: ObjectStore.
If flattening out C++ or Java code to make your application fit in a relational database is painful, don't do it! Check out ObjectStore. Now part of Progress Software. http://www.objectstore.net/sourceforge
Hi,
I just checked the BIOS - it is a mobile bios and does not let you turn IRQs on/off nor other stuff ...
In the bios it reports the card as a SiS 7018.
This would mean it requires the trident driver.
Still no success ! I am beginning to believe that it is something else
! It is a mobile combo chip ... SiS M650 and SiS962
dmesg prints:
Trident 4DWave PCI soundcard not found or device busy
Module inst. reports :/lib/modules/2.4.20-1-686/kernel/sound/pci/trident/snd-trident.o:init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg/lib/modules/2.4.20-1-686/kernel/sound/pci/trident/snd-trident.o: insmod /lib/modules/2.4.20-1-686/kernel/sound/pci/trident/snd-trident.o failed /lib/modules/2.4.20-1-686/kernel/sound/pci/trident/snd-trident.o: insmod snd-trident failed
lspci -v prints :
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 PCI Audio Accelerator (rev a0)
Subsystem: CLEVO/KAPOK Computer: Unknown device 0400
Flags: medium devsel
I/O ports at 1c00 [disabled] [size=256]
I/O ports at 1800 [disabled] [size=128]
Capabilities: [48] Power Management version 2
Quoted 18 lines · Clemens Ladisch
Quoted 9 lines · Matt Flax
When I try to load the intel alsa module I get a hang state, with this output :
PCI: Enabling device 00:02.7 (0000 -> 0001)
PCI: No IRQ known for interrupt pin C of device 00:02.7. Please try using pci=biosirq.
ALSA../alsa-kernel/pci/intel8x0.c:2249: unable to grab IRQ 0So I appended that to the lilo.conf file and ran lilo, upon reboot - same problem.
Apparently, your BIOS didn't allocate an interrupt for the AC'97 device. Try changing some PnP-related settings in the BIOS setup.
HTH
Clemens
Signature · 13 lines
http://mffm.ee.unsw.edu.au WSOLA TimeScale Audio Mod : http://mffmtimescale.sourceforge.net/ FFTw C++ : http://mffmfftwrapper.sourceforge.net/ Vector Bass : http://mffmvectorbass.sourceforge.net/ Multimedia Time Code : http://mffmtimecode.sourceforge.net/ ------------------------------------------------------- This SF.net email is sponsored by: ObjectStore. If flattening out C++ or Java code to make your application fit in a relational database is painful, don't do it! Check out ObjectStore. Now part of Progress Software. http://www.objectstore.net/sourceforge
OK - it would appear the win2k loads this soundcard as a realtek ac'97 sound card.
It gives it :
IRQ=05
I/O=0xf800-0xf8ff
I/O=0xfe80-0xfeff
Is it possible to specify these ? I tried loading the intel8x0 driver with :
modprobe snd-intel8x0 irq=5
but the same problem with irq=0 happened as before.
There is a driver available at realtek :
http://www.realtek.com.tw/downloads/downloads1-3.aspx?series=8&Software=True
If that helps at all ?
Matt
Quoted 77 lines · Matt Flax
Hi,
I just checked the BIOS - it is a mobile bios and does not let you turn IRQs on/off nor other stuff ...
In the bios it reports the card as a SiS 7018.
This would mean it requires the trident driver.Still no success ! I am beginning to believe that it is something else
! It is a mobile combo chip ... SiS M650 and SiS962dmesg prints:
Trident 4DWave PCI soundcard not found or device busyModule inst. reports :
/lib/modules/2.4.20-1-686/kernel/sound/pci/trident/snd-trident.o:init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg/lib/modules/2.4.20-1-686/kernel/sound/pci/trident/snd-trident.o: insmod/lib/modules/2.4.20-1-686/kernel/sound/pci/trident/snd-trident.ofailed/lib/modules/2.4.20-1-686/kernel/sound/pci/trident/snd-trident.o: insmod snd-trident failedlspci -v prints :
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 PCI Audio Accelerator (rev a0)
Subsystem: CLEVO/KAPOK Computer: Unknown device 0400
Flags: medium devsel
I/O ports at 1c00 [disabled] [size=256]
I/O ports at 1800 [disabled] [size=128]
Capabilities: [48] Power Management version 2Quoted 18 lines · Clemens Ladisch
Quoted 9 lines · Matt Flax
When I try to load the intel alsa module I get a hang state, with this output :
PCI: Enabling device 00:02.7 (0000 -> 0001)
PCI: No IRQ known for interrupt pin C of device 00:02.7. Please try using pci=biosirq.
ALSA../alsa-kernel/pci/intel8x0.c:2249: unable to grab IRQ 0So I appended that to the lilo.conf file and ran lilo, upon reboot - same problem.
Apparently, your BIOS didn't allocate an interrupt for the AC'97 device. Try changing some PnP-related settings in the BIOS setup.
HTH
ClemensSignature · 17 lines
http://mffm.ee.unsw.edu.au WSOLA TimeScale Audio Mod : http://mffmtimescale.sourceforge.net/ FFTw C++ : http://mffmfftwrapper.sourceforge.net/ Vector Bass : http://mffmvectorbass.sourceforge.net/ Multimedia Time Code : http://mffmtimecode.sourceforge.net/ ------------------------------------------------------- This SF.net email is sponsored by: ObjectStore. If flattening out C++ or Java code to make your application fit in a relational database is painful, don't do it! Check out ObjectStore. Now part of Progress Software. http://www.objectstore.net/sourceforge _______________________________________________ Alsa-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/alsa-devel
Signature · 13 lines
http://mffm.ee.unsw.edu.au WSOLA TimeScale Audio Mod : http://mffmtimescale.sourceforge.net/ FFTw C++ : http://mffmfftwrapper.sourceforge.net/ Vector Bass : http://mffmvectorbass.sourceforge.net/ Multimedia Time Code : http://mffmtimecode.sourceforge.net/ ------------------------------------------------------- This SF.net email is sponsored by: ObjectStore. If flattening out C++ or Java code to make your application fit in a relational database is painful, don't do it! Check out ObjectStore. Now part of Progress Software. http://www.objectstore.net/sourceforge
RealTek acl650 patch for alsa 0.9.2 [was Re: Re: SiS7012 hang alsa version 0.9.3c ]
Hi,
I was a little surprised that realtek have released a modified ALSA 0.9.2 driver to try to support their ACL650 audio codec.
I have had a little progress regarding the driver ... Available from Realtek's website, you can download the source for the alsa-driver version 0.9.2 :
http://www.realtek.com.tw/downloads/downloads1-3.aspx?series=8&Software=True
I had to alter the source code to get it to compile ... attatched is a diff for patching.
unfortunatly there are alot of unresolved symbols (also attatched) ... they suggest these options :
snd_index=0 snd_id=ICH
A little unsure what to do now ???
Matt
Quoted 116 lines · Matt Flax
OK - it would appear the win2k loads this soundcard as a realtek ac'97 sound card.
It gives it :
IRQ=05
I/O=0xf800-0xf8ff
I/O=0xfe80-0xfeffIs it possible to specify these ? I tried loading the intel8x0 driver with :
modprobe snd-intel8x0 irq=5
but the same problem with irq=0 happened as before.There is a driver available at realtek :
http://www.realtek.com.tw/downloads/downloads1-3.aspx?series=8&Software=TrueIf that helps at all ?
Matt
Quoted 77 lines · Matt Flax
Hi,
I just checked the BIOS - it is a mobile bios and does not let you turn IRQs on/off nor other stuff ...
In the bios it reports the card as a SiS 7018.
This would mean it requires the trident driver.Still no success ! I am beginning to believe that it is something else
! It is a mobile combo chip ... SiS M650 and SiS962dmesg prints:
Trident 4DWave PCI soundcard not found or device busyModule inst. reports :
/lib/modules/2.4.20-1-686/kernel/sound/pci/trident/snd-trident.o:init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg/lib/modules/2.4.20-1-686/kernel/sound/pci/trident/snd-trident.o: insmod/lib/modules/2.4.20-1-686/kernel/sound/pci/trident/snd-trident.ofailed/lib/modules/2.4.20-1-686/kernel/sound/pci/trident/snd-trident.o: insmod snd-trident failedlspci -v prints :
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 PCI Audio Accelerator (rev a0)
Subsystem: CLEVO/KAPOK Computer: Unknown device 0400
Flags: medium devsel
I/O ports at 1c00 [disabled] [size=256]
I/O ports at 1800 [disabled] [size=128]
Capabilities: [48] Power Management version 2Quoted 18 lines · Clemens Ladisch
Quoted 9 lines · Matt Flax
When I try to load the intel alsa module I get a hang state, with this output :
PCI: Enabling device 00:02.7 (0000 -> 0001)
PCI: No IRQ known for interrupt pin C of device 00:02.7. Please try using pci=biosirq.
ALSA../alsa-kernel/pci/intel8x0.c:2249: unable to grab IRQ 0So I appended that to the lilo.conf file and ran lilo, upon reboot - same problem.
Apparently, your BIOS didn't allocate an interrupt for the AC'97 device. Try changing some PnP-related settings in the BIOS setup.
HTH
ClemensSignature · 17 lines
http://mffm.ee.unsw.edu.au WSOLA TimeScale Audio Mod : http://mffmtimescale.sourceforge.net/ FFTw C++ : http://mffmfftwrapper.sourceforge.net/ Vector Bass : http://mffmvectorbass.sourceforge.net/ Multimedia Time Code : http://mffmtimecode.sourceforge.net/ ------------------------------------------------------- This SF.net email is sponsored by: ObjectStore. If flattening out C++ or Java code to make your application fit in a relational database is painful, don't do it! Check out ObjectStore. Now part of Progress Software. http://www.objectstore.net/sourceforge _______________________________________________ Alsa-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/alsa-develSignature · 17 lines
http://mffm.ee.unsw.edu.au WSOLA TimeScale Audio Mod : http://mffmtimescale.sourceforge.net/ FFTw C++ : http://mffmfftwrapper.sourceforge.net/ Vector Bass : http://mffmvectorbass.sourceforge.net/ Multimedia Time Code : http://mffmtimecode.sourceforge.net/ ------------------------------------------------------- This SF.net email is sponsored by: ObjectStore. If flattening out C++ or Java code to make your application fit in a relational database is painful, don't do it! Check out ObjectStore. Now part of Progress Software. http://www.objectstore.net/sourceforge _______________________________________________ Alsa-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/alsa-devel
Signature · 6 lines
http://mffm.ee.unsw.edu.au WSOLA TimeScale Audio Mod : http://mffmtimescale.sourceforge.net/ FFTw C++ : http://mffmfftwrapper.sourceforge.net/ Vector Bass : http://mffmvectorbass.sourceforge.net/ Multimedia Time Code : http://mffmtimecode.sourceforge.net/
/lib/modules/2.4.20-1-686/kernel/sound/acore/seq/snd-seq-device.o: unresolved symbol snd_info_create_module_entry_Re29d7319 /lib/modules/2.4.20-1-686/kernel/sound/acore/seq/snd-seq-device.o: unresolved symbol snd_seq_root_R213fca71 /lib/modules/2.4.20-1-686/kernel/sound/acore/seq/snd-seq-device.o: unresolved symbol snd_device_new_R55ced6c2 /lib/modules/2.4.20-1-686/kernel/sound/acore/seq/snd-seq-device.o: unresolved symbol snd_info_unregister_R1edd2547 /lib/modules/2.4.20-1-686/kernel/sound/acore/seq/snd-seq-device.o: unresolved symbol snd_info_register_R0935365c /lib/modules/2.4.20-1-686/kernel/sound/acore/seq/snd-seq-device.o: unresolved symbol snd_info_free_entry_R52ebb3de /lib/modules/2.4.20-1-686/kernel/sound/acore/seq/snd-seq-device.o: insmod /lib/modules/2.4.20-1-686/kernel/sound/acore/seq/snd-seq-device.o failed /lib/modules/2.4.20-1-686/kernel/sound/acore/seq/snd-seq-device.o: insmod snd-intel8x0 failed
372a373,377
Quoted 5 lines
#define
pcm_micpcm[1]
#definepcm_mic2pcm[2]
#define pcm2 pcm[3]
#definepcm_spdifpcm[4]
#definepcm_ac97spdifpcm[5]
1243c1248
< chip->pcm = NULL;
---
Quoted 1 line
chip->pcm[0] = NULL;
1270c1275
< chip->pcm = pcm;
---
Quoted 1 line
chip->pcm[0] = pcm;
2062c2067
< subs = chip->pcm->streams[0].substream;
---
Quoted 1 line
subs = chip->pcm[0]->streams[0].substream;