Skip to contentSkip to conversation

SiS7012 hang alsa version 0.9.3c

DISCUSSION Matt Flax 2 participants 6 messages May 24, 2003 – May 27, 2003

lore
Share & tools
lore

Matt Flax

author
#0 lore raw

Hi,

Quoted 1 line

From the soundcard matrix 'Details' link :

http://alsa-project.org/alsa-doc/doc-php/template.php3?company=SiS&card=&chip=ad1816a&module=intel8x0
it seems this is supported in the 'intel8x0' driver.

When I try to load the intel alsa module I get a hang state, with this output :
PCI: Enabling device 00:02.7 (0000 -> 0001)
PCI: No IRQ known for interrupt pin C of device 00:02.7. Please try using pci=biosirq.
ALSA ../alsa-kernel/pci/intel8x0.c:2249: unable to grab IRQ 0

So I appended that to the lilo.conf file and ran lilo, upon reboot - same problem.

Any wise tips, or ... anything ???

Matt

Signature · 13 lines
http://mffm.ee.unsw.edu.au

WSOLA TimeScale Audio Mod  : http://mffmtimescale.sourceforge.net/
FFTw C++                   : http://mffmfftwrapper.sourceforge.net/
Vector Bass                : http://mffmvectorbass.sourceforge.net/
Multimedia Time Code       : http://mffmtimecode.sourceforge.net/


-------------------------------------------------------
This SF.net email is sponsored by: ObjectStore.
If flattening out C++ or Java code to make your application fit in a
relational database is painful, don't do it! Check out ObjectStore.
Now part of Progress Software. http://www.objectstore.net/sourceforge
author
#1 lore raw

Hello again,

It would seem this has been seem before ...
http://www.mail-archive.com/[email protected]/msg04601.html

But there was no solution at the end of the thread ... I run kernel version 2.4.20

Perhaps I require a newer kernel version as well ?

Matt

Quoted 27 lines · flatmax

Hi,

From the soundcard matrix 'Details' link :
http://alsa-project.org/alsa-doc/doc-php/template.php3?company=SiS&card=&chip=ad1816a&module=intel8x0
it seems this is supported in the 'intel8x0' driver.

When I try to load the intel alsa module I get a hang state, with this output :
PCI: Enabling device 00:02.7 (0000 -> 0001)
PCI: No IRQ known for interrupt pin C of device 00:02.7. Please try using pci=biosirq.
ALSA ../alsa-kernel/pci/intel8x0.c:2249: unable to grab IRQ 0

So I appended that to the lilo.conf file and ran lilo, upon reboot - same problem.

Any wise tips, or ... anything ???

Matt

Signature · 6 lines
http://mffm.ee.unsw.edu.au

WSOLA TimeScale Audio Mod  : http://mffmtimescale.sourceforge.net/
FFTw C++                   : http://mffmfftwrapper.sourceforge.net/
Vector Bass                : http://mffmvectorbass.sourceforge.net/
Multimedia Time Code       : http://mffmtimecode.sourceforge.net/
Signature · 13 lines
http://mffm.ee.unsw.edu.au

WSOLA TimeScale Audio Mod  : http://mffmtimescale.sourceforge.net/
FFTw C++                   : http://mffmfftwrapper.sourceforge.net/
Vector Bass                : http://mffmvectorbass.sourceforge.net/
Multimedia Time Code       : http://mffmtimecode.sourceforge.net/


-------------------------------------------------------
This SF.net email is sponsored by: ObjectStore.
If flattening out C++ or Java code to make your application fit in a
relational database is painful, don't do it! Check out ObjectStore.
Now part of Progress Software. http://www.objectstore.net/sourceforge
#2 lore raw
Quoted 9 lines · Matt Flax

When I try to load the intel alsa module I get a hang state, with this output :
PCI: Enabling device 00:02.7 (0000 -> 0001)
PCI: No IRQ known for interrupt pin C of device 00:02.7. Please try using pci=biosirq.
ALSA ../alsa-kernel/pci/intel8x0.c:2249: unable to grab IRQ 0

So I appended that to the lilo.conf file and ran lilo, upon reboot - same problem.

Apparently, your BIOS didn't allocate an interrupt for the AC'97 device. Try changing some PnP-related settings in the BIOS setup.

HTH
Clemens

-------------------------------------------------------
This SF.net email is sponsored by: ObjectStore.
If flattening out C++ or Java code to make your application fit in a relational database is painful, don't do it! Check out ObjectStore. Now part of Progress Software. http://www.objectstore.net/sourceforge

author
#3 lore raw

Hi,

I just checked the BIOS - it is a mobile bios and does not let you turn IRQs on/off nor other stuff ...

In the bios it reports the card as a SiS 7018.
This would mean it requires the trident driver.

Still no success ! I am beginning to believe that it is something else
! It is a mobile combo chip ... SiS M650 and SiS962

dmesg prints:
Trident 4DWave PCI soundcard not found or device busy

Module inst. reports :
/lib/modules/2.4.20-1-686/kernel/sound/pci/trident/snd-trident.o:
init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.20-1-686/kernel/sound/pci/trident/snd-trident.o: insmod /lib/modules/2.4.20-1-686/kernel/sound/pci/trident/snd-trident.o failed /lib/modules/2.4.20-1-686/kernel/sound/pci/trident/snd-trident.o: insmod snd-trident failed

lspci -v prints :

00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 PCI Audio Accelerator (rev a0)
Subsystem: CLEVO/KAPOK Computer: Unknown device 0400
Flags: medium devsel
I/O ports at 1c00 [disabled] [size=256]
I/O ports at 1800 [disabled] [size=128]
Capabilities: [48] Power Management version 2

Quoted 18 lines · Clemens Ladisch
Quoted 9 lines · Matt Flax

When I try to load the intel alsa module I get a hang state, with this output :
PCI: Enabling device 00:02.7 (0000 -> 0001)
PCI: No IRQ known for interrupt pin C of device 00:02.7. Please try using pci=biosirq.
ALSA ../alsa-kernel/pci/intel8x0.c:2249: unable to grab IRQ 0

So I appended that to the lilo.conf file and ran lilo, upon reboot - same problem.

Apparently, your BIOS didn't allocate an interrupt for the AC'97 device. Try changing some PnP-related settings in the BIOS setup.

HTH
Clemens

Signature · 13 lines
http://mffm.ee.unsw.edu.au

WSOLA TimeScale Audio Mod  : http://mffmtimescale.sourceforge.net/
FFTw C++                   : http://mffmfftwrapper.sourceforge.net/
Vector Bass                : http://mffmvectorbass.sourceforge.net/
Multimedia Time Code       : http://mffmtimecode.sourceforge.net/


-------------------------------------------------------
This SF.net email is sponsored by: ObjectStore.
If flattening out C++ or Java code to make your application fit in a
relational database is painful, don't do it! Check out ObjectStore.
Now part of Progress Software. http://www.objectstore.net/sourceforge
author
#4 lore raw

OK - it would appear the win2k loads this soundcard as a realtek ac'97 sound card.
It gives it :
IRQ=05
I/O=0xf800-0xf8ff
I/O=0xfe80-0xfeff

Is it possible to specify these ? I tried loading the intel8x0 driver with :
modprobe snd-intel8x0 irq=5
but the same problem with irq=0 happened as before.

There is a driver available at realtek :
http://www.realtek.com.tw/downloads/downloads1-3.aspx?series=8&Software=True

If that helps at all ?

Matt

Quoted 77 lines · Matt Flax

Hi,

I just checked the BIOS - it is a mobile bios and does not let you turn IRQs on/off nor other stuff ...

In the bios it reports the card as a SiS 7018.
This would mean it requires the trident driver.

Still no success ! I am beginning to believe that it is something else
! It is a mobile combo chip ... SiS M650 and SiS962

dmesg prints:
Trident 4DWave PCI soundcard not found or device busy

Module inst. reports :
/lib/modules/2.4.20-1-686/kernel/sound/pci/trident/snd-trident.o:
init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.20-1-686/kernel/sound/pci/trident/snd-trident.o: insmod /lib/modules/2.4.20-1-686/kernel/sound/pci/trident/snd-trident.o failed /lib/modules/2.4.20-1-686/kernel/sound/pci/trident/snd-trident.o: insmod snd-trident failed

lspci -v prints :

00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 PCI Audio Accelerator (rev a0)
Subsystem: CLEVO/KAPOK Computer: Unknown device 0400
Flags: medium devsel
I/O ports at 1c00 [disabled] [size=256]
I/O ports at 1800 [disabled] [size=128]
Capabilities: [48] Power Management version 2

Quoted 18 lines · Clemens Ladisch
Quoted 9 lines · Matt Flax

When I try to load the intel alsa module I get a hang state, with this output :
PCI: Enabling device 00:02.7 (0000 -> 0001)
PCI: No IRQ known for interrupt pin C of device 00:02.7. Please try using pci=biosirq.
ALSA ../alsa-kernel/pci/intel8x0.c:2249: unable to grab IRQ 0

So I appended that to the lilo.conf file and ran lilo, upon reboot - same problem.

Apparently, your BIOS didn't allocate an interrupt for the AC'97 device. Try changing some PnP-related settings in the BIOS setup.

HTH
Clemens

Signature · 17 lines
http://mffm.ee.unsw.edu.au

WSOLA TimeScale Audio Mod  : http://mffmtimescale.sourceforge.net/
FFTw C++                   : http://mffmfftwrapper.sourceforge.net/
Vector Bass                : http://mffmvectorbass.sourceforge.net/
Multimedia Time Code       : http://mffmtimecode.sourceforge.net/


-------------------------------------------------------
This SF.net email is sponsored by: ObjectStore.
If flattening out C++ or Java code to make your application fit in a
relational database is painful, don't do it! Check out ObjectStore.
Now part of Progress Software. http://www.objectstore.net/sourceforge
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
Signature · 13 lines
http://mffm.ee.unsw.edu.au

WSOLA TimeScale Audio Mod  : http://mffmtimescale.sourceforge.net/
FFTw C++                   : http://mffmfftwrapper.sourceforge.net/
Vector Bass                : http://mffmvectorbass.sourceforge.net/
Multimedia Time Code       : http://mffmtimecode.sourceforge.net/


-------------------------------------------------------
This SF.net email is sponsored by: ObjectStore.
If flattening out C++ or Java code to make your application fit in a
relational database is painful, don't do it! Check out ObjectStore.
Now part of Progress Software. http://www.objectstore.net/sourceforge
author
#5 lore raw

RealTek acl650 patch for alsa 0.9.2 [was Re: Re: SiS7012 hang alsa version 0.9.3c ]

Hi,

I was a little surprised that realtek have released a modified ALSA 0.9.2 driver to try to support their ACL650 audio codec.

I have had a little progress regarding the driver ... Available from Realtek's website, you can download the source for the alsa-driver version 0.9.2 :
http://www.realtek.com.tw/downloads/downloads1-3.aspx?series=8&Software=True

I had to alter the source code to get it to compile ... attatched is a diff for patching.

unfortunatly there are alot of unresolved symbols (also attatched) ... they suggest these options :
snd_index=0 snd_id=ICH

A little unsure what to do now ???

Matt

Quoted 116 lines · Matt Flax

OK - it would appear the win2k loads this soundcard as a realtek ac'97 sound card.
It gives it :
IRQ=05
I/O=0xf800-0xf8ff
I/O=0xfe80-0xfeff

Is it possible to specify these ? I tried loading the intel8x0 driver with :
modprobe snd-intel8x0 irq=5
but the same problem with irq=0 happened as before.

There is a driver available at realtek :
http://www.realtek.com.tw/downloads/downloads1-3.aspx?series=8&Software=True

If that helps at all ?

Matt

Quoted 77 lines · Matt Flax

Hi,

I just checked the BIOS - it is a mobile bios and does not let you turn IRQs on/off nor other stuff ...

In the bios it reports the card as a SiS 7018.
This would mean it requires the trident driver.

Still no success ! I am beginning to believe that it is something else
! It is a mobile combo chip ... SiS M650 and SiS962

dmesg prints:
Trident 4DWave PCI soundcard not found or device busy

Module inst. reports :
/lib/modules/2.4.20-1-686/kernel/sound/pci/trident/snd-trident.o:
init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.20-1-686/kernel/sound/pci/trident/snd-trident.o: insmod /lib/modules/2.4.20-1-686/kernel/sound/pci/trident/snd-trident.o failed /lib/modules/2.4.20-1-686/kernel/sound/pci/trident/snd-trident.o: insmod snd-trident failed

lspci -v prints :

00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 PCI Audio Accelerator (rev a0)
Subsystem: CLEVO/KAPOK Computer: Unknown device 0400
Flags: medium devsel
I/O ports at 1c00 [disabled] [size=256]
I/O ports at 1800 [disabled] [size=128]
Capabilities: [48] Power Management version 2

Quoted 18 lines · Clemens Ladisch
Quoted 9 lines · Matt Flax

When I try to load the intel alsa module I get a hang state, with this output :
PCI: Enabling device 00:02.7 (0000 -> 0001)
PCI: No IRQ known for interrupt pin C of device 00:02.7. Please try using pci=biosirq.
ALSA ../alsa-kernel/pci/intel8x0.c:2249: unable to grab IRQ 0

So I appended that to the lilo.conf file and ran lilo, upon reboot - same problem.

Apparently, your BIOS didn't allocate an interrupt for the AC'97 device. Try changing some PnP-related settings in the BIOS setup.

HTH
Clemens

Signature · 17 lines
http://mffm.ee.unsw.edu.au

WSOLA TimeScale Audio Mod  : http://mffmtimescale.sourceforge.net/
FFTw C++                   : http://mffmfftwrapper.sourceforge.net/
Vector Bass                : http://mffmvectorbass.sourceforge.net/
Multimedia Time Code       : http://mffmtimecode.sourceforge.net/


-------------------------------------------------------
This SF.net email is sponsored by: ObjectStore.
If flattening out C++ or Java code to make your application fit in a
relational database is painful, don't do it! Check out ObjectStore.
Now part of Progress Software. http://www.objectstore.net/sourceforge
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
Signature · 17 lines
http://mffm.ee.unsw.edu.au

WSOLA TimeScale Audio Mod  : http://mffmtimescale.sourceforge.net/
FFTw C++                   : http://mffmfftwrapper.sourceforge.net/
Vector Bass                : http://mffmvectorbass.sourceforge.net/
Multimedia Time Code       : http://mffmtimecode.sourceforge.net/


-------------------------------------------------------
This SF.net email is sponsored by: ObjectStore.
If flattening out C++ or Java code to make your application fit in a
relational database is painful, don't do it! Check out ObjectStore.
Now part of Progress Software. http://www.objectstore.net/sourceforge
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
Signature · 6 lines
http://mffm.ee.unsw.edu.au

WSOLA TimeScale Audio Mod  : http://mffmtimescale.sourceforge.net/
FFTw C++                   : http://mffmfftwrapper.sourceforge.net/
Vector Bass                : http://mffmvectorbass.sourceforge.net/
Multimedia Time Code       : http://mffmtimecode.sourceforge.net/

/lib/modules/2.4.20-1-686/kernel/sound/acore/seq/snd-seq-device.o: unresolved symbol snd_info_create_module_entry_Re29d7319 /lib/modules/2.4.20-1-686/kernel/sound/acore/seq/snd-seq-device.o: unresolved symbol snd_seq_root_R213fca71 /lib/modules/2.4.20-1-686/kernel/sound/acore/seq/snd-seq-device.o: unresolved symbol snd_device_new_R55ced6c2 /lib/modules/2.4.20-1-686/kernel/sound/acore/seq/snd-seq-device.o: unresolved symbol snd_info_unregister_R1edd2547 /lib/modules/2.4.20-1-686/kernel/sound/acore/seq/snd-seq-device.o: unresolved symbol snd_info_register_R0935365c /lib/modules/2.4.20-1-686/kernel/sound/acore/seq/snd-seq-device.o: unresolved symbol snd_info_free_entry_R52ebb3de /lib/modules/2.4.20-1-686/kernel/sound/acore/seq/snd-seq-device.o: insmod /lib/modules/2.4.20-1-686/kernel/sound/acore/seq/snd-seq-device.o failed /lib/modules/2.4.20-1-686/kernel/sound/acore/seq/snd-seq-device.o: insmod snd-intel8x0 failed

372a373,377

Quoted 5 lines

#define pcm_mic pcm[1]
#define pcm_mic2 pcm[2]
#define pcm2 pcm[3]
#define pcm_spdif pcm[4]
#define pcm_ac97spdif pcm[5]

1243c1248
< chip->pcm = NULL;
---

Quoted 1 line
	chip->pcm[0] = NULL;

1270c1275
< chip->pcm = pcm;
---

Quoted 1 line
	chip->pcm[0] = pcm;

2062c2067
< subs = chip->pcm->streams[0].substream;
---

Quoted 1 line
	subs = chip->pcm[0]->streams[0].substream;