Your policy
Hi Russel,
for my Linuxtag workshop tomorrow, I use the policy snapshot from your homepage.
I think you have a little mistake in your ifdef condition for inetd.te.
The follow lines should fix the problem:
ifdef(inetd.te',
ifdef(run_ssh_inetd',
allow inetd_t ssh_port_t:tcp_socket name_bind; domain_auto_trans_read(inetd_t, sshd_exec_t, sshd_t) allow sshd_t inetd_t:tcp_socket { ioctl setopt getopt getattr read write };
', `
allow sshd_t initrc_devpts_t:chr_file rw_file_perms; allow sshd_t ssh_port_t:tcp_socket name_bind; domain_auto_trans(initrc_t, sshd_exec_t, sshd_t)
'), `
allow sshd_t initrc_devpts_t:chr_file rw_file_perms; allow sshd_t ssh_port_t:tcp_socket name_bind; domain_auto_trans(initrc_t, sshd_exec_t, sshd_t)
')
Carsten
--
This message was distributed to subscribers of the selinux mailing list. If you no longer wish to subscribe, send mail to [email protected] with the words "unsubscribe selinux" without quotes as the message.
Quoted 4 lines · Carsten Grohmann
for my Linuxtag workshop tomorrow, I use the policy snapshot from your homepage.
I think you have a little mistake in your ifdef condition for inetd.te.
Correct, I have attached an amended ssh.te file. The change is already in my policy tree and Howard has a similar change in his tree.
Signature · 4 lines
http://www.coker.com.au/selinux/ My NSA Security Enhanced Linux packages http://www.coker.com.au/bonnie++/ Bonnie++ hard drive benchmark http://www.coker.com.au/postal/ Postal SMTP/POP benchmark http://www.coker.com.au/~russell/ My home page
#DESC SSH - SSH daemon
#
# Authors: Anthony Colatrella (NSA) <[email protected]> # Modified by: Russell Coker <[email protected]> #
type ssh_port_t, port_type;
define(sshd_program_domain',
type $1, domain, privuser, privrole, privlog, privowner, privfd, auth; role system_r types $1;uses_shlib($1)
allow $1 self:unix_dgram_socket create_socket_perms;
allow $1 self:unix_stream_socket create_stream_socket_perms; allow $1 self:fifo_file rw_file_perms;
allow $1 self:process { fork sigchld setsched };
# Read system information files in /proc. allow $1 proc_t:dir r_dir_perms;
allow $1 proc_t:notdevfile_class_set r_file_perms; allow $1 self:dir search;
allow $1 self:lnk_file read;
# Get attributes of file systems.
allow $1 fs_type:filesystem getattr;
base_file_read_access($1)
# Read /var.
allow $1 var_t:dir search;
# Read /var/log.
allow $1 var_log_t:dir search;
# Read /etc.
allow $1 etc_t:dir r_dir_perms;
allow $1 etc_t:notdevfile_class_set r_file_perms; allow $1 etc_runtime_t:{ file lnk_file } r_file_perms; allow $1 resolv_conf_t:{ file lnk_file } r_file_perms;
# Read the linker, shared library, and executable types. allow $1 ld_so_t:{ file lnk_file } r_file_perms; allow $1 shlib_t:{ file lnk_file } r_file_perms; allow $1 exec_type:{ file lnk_file } r_file_perms;
# Read and write /dev/tty and /dev/null.
allow $1 devtty_t:chr_file rw_file_perms;
allow $1 { null_device_t zero_device_t }:chr_file rw_file_perms;
# Read /dev/random and /dev/zero.
allow $1 random_device_t:chr_file r_file_perms;
allow $1 security_t:security { sid_to_context context_to_sid }; can_network($1)
allow $1 self:capability { chown dac_override fowner fsetid setgid setuid net_bind_service sys_tty_config }; allow $1 { home_root_t user_home_dir_type sysadm_home_dir_t }:dir { search getattr };
# Run shells in user_t by defaultdomain_auto_trans($1, shell_exec_t, user_t)domain_trans($1, shell_exec_t, unpriv_userdomain)
# Allow shells to be run in sysadm_t as well.
# Commented out. Use newrole rather than directly entering sysadm_t. #domain_trans($1, shell_exec_t, sysadm_t)
# Update utmp.
allow $1 initrc_var_run_t:file rw_file_perms;
# Update wtmp.
allow $1 wtmp_t:file rw_file_perms;
# Obtain the SID to use for relabeling ptys
allow $1 security_t:security change_sid;
# Allow read access to login context
allow $1 default_context_t:file r_file_perms;
# Determine the set of legal user SIDs that can be reached. allow $1 security_t:security get_user_sids;
')dnl end sshd_program_domain
#################################
#
# Rules for the sshd_t domain, et al.
#
# sshd_t is the domain for the sshd program. # sshd_login_t is the domain for sshds login spawn # sshd_exec_t is the type of the sshd executable. # sshd_key_t is the type of the ssh private key files # sshd_program_domain(sshd_t) type sshd_exec_t, file_type, exec_type, sysadmfile;
ifdef(inetd.te',
ifdef(run_ssh_inetd',
define(using_ssh_inetd', ')
')
')
ifdef(using_ssh_inetd',
allow inetd_t ssh_port_t:tcp_socket name_bind; domain_auto_trans_read(inetd_t, sshd_exec_t, sshd_t)
allow sshd_t inetd_t:tcp_socket { ioctl setopt getopt getattr read write }; ', `
allow sshd_t initrc_devpts_t:chr_file rw_file_perms;
allow sshd_t ssh_port_t:tcp_socket name_bind; domain_auto_trans(initrc_t, sshd_exec_t, sshd_t)
')sshd_program_domain(sshd_login_t) undefine(`sshd_program_domain')
type sshd_key_t, file_type, sysadmfile;
# so a tunnel can point to another ssh tunnel... can_tcp_connect(sshd_t, sshd_t)
type sshd_tmp_t, file_type, sysadmfile, tmpfile;file_type_auto_trans(sshd_t, tmp_t, sshd_tmp_t)
# Inherit and use descriptors from init.
allow sshd_t init_t:fd use;
# Can create ptyscan_create_pty(sshd)
# Execute Logindomain_auto_trans(sshd_t, login_exec_t, sshd_login_t)
# Use capabilities.
allow sshd_t self:capability { sys_chroot sys_resource };
# Create /var/run/sshd.pidvar_run_domain(sshd)
# Access key files
allow sshd_t sshd_key_t:file { getattr read };
# Update /var/log/lastlog.
allow sshd_t lastlog_t:file rw_file_perms;
# Signal the user domains.
allow sshd_t unpriv_userdomain:process signal;
# Relabel and access ptys created by sshd
allow sshd_t sshd_devpts_t:chr_file { setattr getattr relabelfrom relabelto }; allow sshd_t userpty_type:chr_file { setattr relabelto rw_file_perms };
# for when the network connection breaks after running newrole -r sysadm_r dontaudit sshd_t sysadm_devpts_t:chr_file setattr;
#################################
#
# Rules for the sshd_login_t domain
#
# sshd_login_t is the domain of a login process # spawned by sshd
# Use the pty created by sshd
allow sshd_login_t sshd_devpts_t:chr_file { setattr rw_file_perms };
# Write to /var/log/lastlog
allow sshd_login_t lastlog_t:file rw_file_perms;
# Relabel ptys created by sshd
allow sshd_login_t sshd_devpts_t:chr_file { relabelfrom relabelto }; allow sshd_login_t userpty_type:chr_file { getattr relabelfrom relabelto };
read_locale(sshd_t)
# Allow checking users mail at login
allow sshd_t { var_spool_t mail_spool_t }:dir search; allow sshd_t mail_spool_t:lnk_file read; allow sshd_t mail_spool_t:file getattr;
#
# Author: Stephen Smalley <[email protected]> #
# Type for the ssh executable.
type ssh_exec_t, file_type, exec_type, sysadmfile;
allow sysadm_ssh_t user_home_dir_type:dir search;r_dir_file(sysadm_ssh_t, user_home_ssh_t)
# Everything else is in the ssh_domain macro in
# macros/program/ssh_macros.te.