Skip to contentSkip to conversation

Your policy

DISCUSSION Carsten Grohmann 2 participants 2 messages Jul 10, 2003 SELinux security module

lore
Share & tools
lore
#0 lore raw

Hi Russel,

for my Linuxtag workshop tomorrow, I use the policy snapshot from your homepage.
I think you have a little mistake in your ifdef condition for inetd.te.
The follow lines should fix the problem:
ifdef(inetd.te',
ifdef(run_ssh_inetd',
allow inetd_t ssh_port_t:tcp_socket name_bind; domain_auto_trans_read(inetd_t, sshd_exec_t, sshd_t) allow sshd_t inetd_t:tcp_socket { ioctl setopt getopt getattr read write };
', `
allow sshd_t initrc_devpts_t:chr_file rw_file_perms; allow sshd_t ssh_port_t:tcp_socket name_bind; domain_auto_trans(initrc_t, sshd_exec_t, sshd_t)
'), `
allow sshd_t initrc_devpts_t:chr_file rw_file_perms; allow sshd_t ssh_port_t:tcp_socket name_bind; domain_auto_trans(initrc_t, sshd_exec_t, sshd_t)
')

Carsten

--
This message was distributed to subscribers of the selinux mailing list. If you no longer wish to subscribe, send mail to [email protected] with the words "unsubscribe selinux" without quotes as the message.

#1 lore raw
Quoted 4 lines · Carsten Grohmann

for my Linuxtag workshop tomorrow, I use the policy snapshot from your homepage.
I think you have a little mistake in your ifdef condition for inetd.te.

Correct, I have attached an amended ssh.te file. The change is already in my policy tree and Howard has a similar change in his tree.

Signature · 4 lines
http://www.coker.com.au/selinux/   My NSA Security Enhanced Linux packages
http://www.coker.com.au/bonnie++/  Bonnie++ hard drive benchmark
http://www.coker.com.au/postal/    Postal SMTP/POP benchmark
http://www.coker.com.au/~russell/  My home page

#DESC SSH - SSH daemon
#
# Authors: Anthony Colatrella (NSA) <[email protected]> # Modified by: Russell Coker <[email protected]> #

type ssh_port_t, port_type;

define(sshd_program_domain',
type $1, domain, privuser, privrole, privlog, privowner, privfd, auth; role system_r types $1;
uses_shlib($1)
allow $1 self:unix_dgram_socket create_socket_perms;
allow $1 self:unix_stream_socket create_stream_socket_perms; allow $1 self:fifo_file rw_file_perms;
allow $1 self:process { fork sigchld setsched };

# Read system information files in /proc. allow $1 proc_t:dir r_dir_perms;
allow $1 proc_t:notdevfile_class_set r_file_perms; allow $1 self:dir search;
allow $1 self:lnk_file read;

# Get attributes of file systems.
allow $1 fs_type:filesystem getattr;

base_file_read_access($1)

# Read /var.
allow $1 var_t:dir search;

# Read /var/log.
allow $1 var_log_t:dir search;

# Read /etc.
allow $1 etc_t:dir r_dir_perms;
allow $1 etc_t:notdevfile_class_set r_file_perms; allow $1 etc_runtime_t:{ file lnk_file } r_file_perms; allow $1 resolv_conf_t:{ file lnk_file } r_file_perms;

# Read the linker, shared library, and executable types. allow $1 ld_so_t:{ file lnk_file } r_file_perms; allow $1 shlib_t:{ file lnk_file } r_file_perms; allow $1 exec_type:{ file lnk_file } r_file_perms;

# Read and write /dev/tty and /dev/null.
allow $1 devtty_t:chr_file rw_file_perms;
allow $1 { null_device_t zero_device_t }:chr_file rw_file_perms;

# Read /dev/random and /dev/zero.
allow $1 random_device_t:chr_file r_file_perms;

allow $1 security_t:security { sid_to_context context_to_sid }; can_network($1)

allow $1 self:capability { chown dac_override fowner fsetid setgid setuid net_bind_service sys_tty_config }; allow $1 { home_root_t user_home_dir_type sysadm_home_dir_t }:dir { search getattr };

# Run shells in user_t by default
domain_auto_trans($1, shell_exec_t, user_t)
domain_trans($1, shell_exec_t, unpriv_userdomain)

# Allow shells to be run in sysadm_t as well.
# Commented out. Use newrole rather than directly entering sysadm_t. #domain_trans($1, shell_exec_t, sysadm_t)

# Update utmp.
allow $1 initrc_var_run_t:file rw_file_perms;

# Update wtmp.
allow $1 wtmp_t:file rw_file_perms;

# Obtain the SID to use for relabeling ptys
allow $1 security_t:security change_sid;

# Allow read access to login context
allow $1 default_context_t:file r_file_perms;

# Determine the set of legal user SIDs that can be reached. allow $1 security_t:security get_user_sids;

')dnl end sshd_program_domain

#################################
#
# Rules for the sshd_t domain, et al.
#

# sshd_t is the domain for the sshd program.
# sshd_login_t is the domain for sshds login spawn
# sshd_exec_t is the type of the sshd executable.
# sshd_key_t is the type of the ssh private key files
#
sshd_program_domain(sshd_t)
type sshd_exec_t, file_type, exec_type, sysadmfile;

ifdef(inetd.te',
ifdef(run_ssh_inetd',
define(using_ssh_inetd', ')
')
')

ifdef(using_ssh_inetd',
allow inetd_t ssh_port_t:tcp_socket name_bind; domain_auto_trans_read(inetd_t, sshd_exec_t, sshd_t)
allow sshd_t inetd_t:tcp_socket { ioctl setopt getopt getattr read write }; ', `
allow sshd_t initrc_devpts_t:chr_file rw_file_perms;
allow sshd_t ssh_port_t:tcp_socket name_bind; domain_auto_trans(initrc_t, sshd_exec_t, sshd_t)
')
sshd_program_domain(sshd_login_t) undefine(`sshd_program_domain')
type sshd_key_t, file_type, sysadmfile;

# so a tunnel can point to another ssh tunnel...
can_tcp_connect(sshd_t, sshd_t)

type sshd_tmp_t, file_type, sysadmfile, tmpfile;
file_type_auto_trans(sshd_t, tmp_t, sshd_tmp_t)

# Inherit and use descriptors from init.
allow sshd_t init_t:fd use;

# Can create ptys
can_create_pty(sshd)

# Execute Login
domain_auto_trans(sshd_t, login_exec_t, sshd_login_t)

# Use capabilities.
allow sshd_t self:capability { sys_chroot sys_resource };

# Create /var/run/sshd.pid
var_run_domain(sshd)

# Access key files
allow sshd_t sshd_key_t:file { getattr read };

# Update /var/log/lastlog.
allow sshd_t lastlog_t:file rw_file_perms;

# Signal the user domains.
allow sshd_t unpriv_userdomain:process signal;

# Relabel and access ptys created by sshd
allow sshd_t sshd_devpts_t:chr_file { setattr getattr relabelfrom relabelto }; allow sshd_t userpty_type:chr_file { setattr relabelto rw_file_perms };

# for when the network connection breaks after running newrole -r sysadm_r
dontaudit sshd_t sysadm_devpts_t:chr_file setattr;

#################################
#
# Rules for the sshd_login_t domain
#

# sshd_login_t is the domain of a login process
# spawned by sshd

# Use the pty created by sshd
allow sshd_login_t sshd_devpts_t:chr_file { setattr rw_file_perms };

# Write to /var/log/lastlog
allow sshd_login_t lastlog_t:file rw_file_perms;

# Relabel ptys created by sshd
allow sshd_login_t sshd_devpts_t:chr_file { relabelfrom relabelto }; allow sshd_login_t userpty_type:chr_file { getattr relabelfrom relabelto };

read_locale(sshd_t)

# Allow checking users mail at login
allow sshd_t { var_spool_t mail_spool_t }:dir search; allow sshd_t mail_spool_t:lnk_file read; allow sshd_t mail_spool_t:file getattr;
#
# Author: Stephen Smalley <[email protected]> #

# Type for the ssh executable.
type ssh_exec_t, file_type, exec_type, sysadmfile;

allow sysadm_ssh_t user_home_dir_type:dir search;
r_dir_file(sysadm_ssh_t, user_home_ssh_t)

# Everything else is in the ssh_domain macro in

# macros/program/ssh_macros.te.