Missing cardbus label in /proc/interrupts
Seen in 2.6.0-test3's /proc/interrupts:
CPU0
0: 179268180 XT-PIC timer 1: 36175 XT-PIC i8042 2: 0 XT-PIC cascade 3: 1248 XT-PIC ide2 5: 820479 XT-PIC ESS Maestro 2 8: 1 XT-PIC rtc 11: 3548209 XT-PIC uhci-hcd, , , eth0 14: 518106 XT-PIC ide0 15: 714841 XT-PIC ide1 NMI: 0 ERR: 18176
The cardbus devices aren't listed. I'm using the network card in one and the CF card is readable in the other. This is probably a trivial bug.
[root@violet 16:08:54 root]# lspci -v
...
00:04.0 CardBus bridge: Texas Instruments PCI1220 (rev 02)
Subsystem: Dell Computer Corporation: Unknown device 0085
Flags: bus master, medium devsel, latency 168, IRQ 11
Memory at 10000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 10400000-107ff000 (prefetchable)
Memory window 1: 10800000-10bff000
I/O window 0: 00001000-000010ff
I/O window 1: 00001400-000014ff
16-bit legacy interface ports at 000100:04.1 CardBus bridge: Texas Instruments PCI1220 (rev 02)
Subsystem: Dell Computer Corporation: Unknown device 0085
Flags: bus master, medium devsel, latency 168, IRQ 11
Memory at 10001000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
Memory window 0: 10c00000-10fff000 (prefetchable)
Memory window 1: 11000000-113ff000
I/O window 0: 00001800-000018ff
I/O window 1: 00001c00-00001cff
16-bit legacy interface ports at 0001...
I noticed this after several card insertions, so I rebooted the system, but this seems to be constant.
-Paul
Quoted 41 lines · Paul Dickson
Seen in 2.6.0-test3's
/proc/interrupts:CPU0
0: 179268180 XT-PIC timer 1: 36175 XT-PIC i8042 2: 0 XT-PIC cascade 3: 1248 XT-PIC ide2 5: 820479 XT-PIC ESS Maestro 2 8: 1 XT-PIC rtc 11: 3548209 XT-PIC uhci-hcd, , , eth0 14: 518106 XT-PIC ide0 15: 714841 XT-PIC ide1 NMI: 0 ERR: 18176The cardbus devices aren't listed. I'm using the network card in one and the CF card is readable in the other. This is probably a trivial bug.
[root@violet 16:08:54 root]# lspci -v
...
00:04.0 CardBus bridge: Texas Instruments PCI1220 (rev 02)Subsystem: Dell Computer Corporation: Unknown device 0085 Flags: bus master, medium devsel, latency 168, IRQ 11 Memory at 10000000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=02, subordinate=05, sec-latency=176 Memory window 0: 10400000-107ff000 (prefetchable) Memory window 1: 10800000-10bff000 I/O window 0: 00001000-000010ff I/O window 1: 00001400-000014ff 16-bit legacy interface ports at 000100:04.1 CardBus bridge: Texas Instruments PCI1220 (rev 02)
Subsystem: Dell Computer Corporation: Unknown device 0085 Flags: bus master, medium devsel, latency 168, IRQ 11 Memory at 10001000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=06, subordinate=09, sec-latency=176 Memory window 0: 10c00000-10fff000 (prefetchable) Memory window 1: 11000000-113ff000 I/O window 0: 00001800-000018ff I/O window 1: 00001c00-00001cff 16-bit legacy interface ports at 0001
Quoted 1 line
...
In 2.6.0-test4, /proc/interrupts:
11: 195758 XT-PIC uhci-hcd, 0000:00:04.0, 0000:00:04.1, eth0
The labels are no longer missing, but is this the ultimate designation for a cardbus bridge?
-Paul
Quoted 6 lines · Paul Dickson
In 2.6.0-test4,
/proc/interrupts:11: 195758 XT-PIC uhci-hcd, 0000:00:04.0, 0000:00:04.1, eth0
The labels are no longer missing, but is this the ultimate designation for a cardbus bridge?
This should be fixed in 2.6.0-test4-bkcurr as of tonight (they're now called "yenta".)
Signature · 5 lines
Russell King ([email protected]) http://www.arm.linux.org.uk/personal/ Linux kernel maintainer of: 2.6 ARM Linux - http://www.arm.linux.org.uk/ 2.6 PCMCIA - http://pcmcia.arm.linux.org.uk/ 2.6 Serial core