Skip to contentSkip to conversation

Missing cardbus label in /proc/interrupts

DISCUSSION Paul Dickson 2 participants 3 messages Aug 15, 2003 – Sep 6, 2003

lore
Share & tools
lore
#0 lore raw

Seen in 2.6.0-test3's /proc/interrupts:

CPU0

  0:  179268180          XT-PIC  timer
  1:      36175          XT-PIC  i8042
  2:          0          XT-PIC  cascade
  3:       1248          XT-PIC  ide2
  5:     820479          XT-PIC  ESS Maestro 2
  8:          1          XT-PIC  rtc
 11:    3548209          XT-PIC  uhci-hcd, , , eth0
 14:     518106          XT-PIC  ide0
 15:     714841          XT-PIC  ide1
NMI:          0 
ERR:      18176

The cardbus devices aren't listed. I'm using the network card in one and the CF card is readable in the other. This is probably a trivial bug.

[root@violet 16:08:54 root]# lspci -v
...
00:04.0 CardBus bridge: Texas Instruments PCI1220 (rev 02)

        Subsystem: Dell Computer Corporation: Unknown device 0085
        Flags: bus master, medium devsel, latency 168, IRQ 11
        Memory at 10000000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
        Memory window 0: 10400000-107ff000 (prefetchable)
        Memory window 1: 10800000-10bff000
        I/O window 0: 00001000-000010ff
        I/O window 1: 00001400-000014ff
        16-bit legacy interface ports at 0001

00:04.1 CardBus bridge: Texas Instruments PCI1220 (rev 02)

        Subsystem: Dell Computer Corporation: Unknown device 0085
        Flags: bus master, medium devsel, latency 168, IRQ 11
        Memory at 10001000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
        Memory window 0: 10c00000-10fff000 (prefetchable)
        Memory window 1: 11000000-113ff000
        I/O window 0: 00001800-000018ff
        I/O window 1: 00001c00-00001cff
        16-bit legacy interface ports at 0001

...

I noticed this after several card insertions, so I rebooted the system, but this seems to be constant.

-Paul

#1 lore raw
Quoted 41 lines · Paul Dickson

Seen in 2.6.0-test3's /proc/interrupts:

CPU0

  0:  179268180          XT-PIC  timer
  1:      36175          XT-PIC  i8042
  2:          0          XT-PIC  cascade
  3:       1248          XT-PIC  ide2
  5:     820479          XT-PIC  ESS Maestro 2
  8:          1          XT-PIC  rtc
 11:    3548209          XT-PIC  uhci-hcd, , , eth0
 14:     518106          XT-PIC  ide0
 15:     714841          XT-PIC  ide1
NMI:          0 
ERR:      18176

The cardbus devices aren't listed. I'm using the network card in one and the CF card is readable in the other. This is probably a trivial bug.

[root@violet 16:08:54 root]# lspci -v
...
00:04.0 CardBus bridge: Texas Instruments PCI1220 (rev 02)

        Subsystem: Dell Computer Corporation: Unknown device 0085
        Flags: bus master, medium devsel, latency 168, IRQ 11
        Memory at 10000000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
        Memory window 0: 10400000-107ff000 (prefetchable)
        Memory window 1: 10800000-10bff000
        I/O window 0: 00001000-000010ff
        I/O window 1: 00001400-000014ff
        16-bit legacy interface ports at 0001

00:04.1 CardBus bridge: Texas Instruments PCI1220 (rev 02)

        Subsystem: Dell Computer Corporation: Unknown device 0085
        Flags: bus master, medium devsel, latency 168, IRQ 11
        Memory at 10001000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
        Memory window 0: 10c00000-10fff000 (prefetchable)
        Memory window 1: 11000000-113ff000
        I/O window 0: 00001800-000018ff
        I/O window 1: 00001c00-00001cff
        16-bit legacy interface ports at 0001
Quoted 1 line

...

In 2.6.0-test4, /proc/interrupts:

11: 195758 XT-PIC uhci-hcd, 0000:00:04.0, 0000:00:04.1, eth0

The labels are no longer missing, but is this the ultimate designation for a cardbus bridge?

-Paul

#2 lore raw
Quoted 6 lines · Paul Dickson

In 2.6.0-test4, /proc/interrupts:

11: 195758 XT-PIC uhci-hcd, 0000:00:04.0, 0000:00:04.1, eth0

The labels are no longer missing, but is this the ultimate designation for a cardbus bridge?

This should be fixed in 2.6.0-test4-bkcurr as of tonight (they're now called "yenta".)

Signature · 5 lines
Russell King ([email protected])	http://www.arm.linux.org.uk/personal/
Linux kernel maintainer of:
  2.6 ARM Linux   - http://www.arm.linux.org.uk/
  2.6 PCMCIA      - http://pcmcia.arm.linux.org.uk/
  2.6 Serial core