Skip to contentSkip to conversation

2.6-test4: mpspec.h:6:25: mach_mpspec.h: Missing file

DISCUSSION j d 2 participants 2 messages Sep 4, 2003 – Sep 5, 2003

lore
Share & tools
lore

j d

author
#0 lore raw

Hi.
I'm trying to build a (add-on) module on a machine booted from a 2.6-test4 kernel, And keep running into this error. I've included a sample program , and gcc command line.

I built the kernel:

make defconfig;

It is a 2W SMP (Compaq ML850)
couple minor modes like enet & SCSI device make
My general question is, should I include the

-I/work/src/<build>/include/asm-i386/mach-generic/mach_mpspec.h

in my gcc command line or is my build area incorrect is
some way that the correct mpspec.h file can't be found ?

Thx. JD.

__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com

In file included from /work/src/linux-2.6.0-test4/include/asm/smp.h:18,

                 from /work/src/linux-2.6.0-test4/include/linux/smp.h:17,
                 from /work/src/linux-2.6.0-test4/include/linux/topology.h:33,
                 from /work/src/linux-2.6.0-test4/include/linux/mmzone.h:294,
                 from /work/src/linux-2.6.0-test4/include/linux/gfp.h:4,
                 from /work/src/linux-2.6.0-test4/include/linux/slab.h:15,
                 from test.c:8:

/work/src/linux-2.6.0-test4/include/asm/mpspec.h:6:25: mach_mpspec.h: No such file or directory /work/src/linux-2.6.0-test4/include/asm/mpspec.h:8: `MAX_MP_BUSSES' undeclared here (not in a function)

 gcc -g -D__KERNEL__ -DMODULE -I/work/src/linux-2.6.0-test4/include \
	-I/work/src/linux-2.6.0-test4/drivers/scsi -c test.c

// -- snip sample

#include <linux/version.h> // 2.6 ++
#include <linux/config.h> // 2.6 ++
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/spinlock.h>
#include <asm/io.h>
#include <asm/system.h>
#include <linux/slab.h>
#include <linux/interrupt.h>

#define MEMORY_TABLE_SIZE 512

void *
my_kmalloc(unsigned int size, char *id)

{
	char *ptr ;
	if ((ptr =
	     kmalloc(size,
		     (in_interrupt()? GFP_ATOMIC : GFP_KERNEL))) == NULL) {
		kprintf("Cannot allocate %u bytes for %s\n", size, id);
	}
}
#1 lore raw

On Thu, 4 Sep 2003 15:02:33 -0700 (PDT) j d <[email protected]> wrote:

| Hi. 
| I'm trying to build a (add-on) module 
| on a machine booted from a 2.6-test4 kernel,
| And keep running into this error. I've 
| included a sample program , and gcc command
| line.
| 
| I built the kernel:
| 
| make defconfig; 
| 
| It is a 2W SMP (Compaq ML850)
| couple minor modes like enet & SCSI device
| make
| My general question is, should I include the 
| 
| -I/work/src/<build>/include/asm-i386/mach-generic/mach_mpspec.h
| 
| in my gcc command line or is my build area incorrect
| is
| some way that the correct mpspec.h file can't be found

See linux/Documentation/modules.txt and Documentation/kbuild/makefiles.txt for how to do this properly. Basically put your source and Makefile in a subdir, then use this command and it builds without that error. (Your source had a few other warnings, but it does build this way.)

Here's the Makefile that I used, with usage info in it:

# makefile for addonmodule
# Randy Dunlap, 2003-02-21
# usage:
# cd /path/to/kernel/source && make SUBDIRS=/path/to/source/addonmodule/ modules

obj-m := addonmodule.o

--
~Randy