2.6-test4: mpspec.h:6:25: mach_mpspec.h: Missing file
Hi.
I'm trying to build a (add-on) module on a machine booted from a 2.6-test4 kernel, And keep running into this error. I've included a sample program , and gcc command line.
I built the kernel:
make defconfig;
It is a 2W SMP (Compaq ML850)
couple minor modes like enet & SCSI device make
My general question is, should I include the
-I/work/src/<build>/include/asm-i386/mach-generic/mach_mpspec.h
in my gcc command line or is my build area incorrect is
some way that the correct mpspec.h file can't be found ?
Thx. JD.
__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com
In file included from /work/src/linux-2.6.0-test4/include/asm/smp.h:18,
from /work/src/linux-2.6.0-test4/include/linux/smp.h:17,
from /work/src/linux-2.6.0-test4/include/linux/topology.h:33,
from /work/src/linux-2.6.0-test4/include/linux/mmzone.h:294,
from /work/src/linux-2.6.0-test4/include/linux/gfp.h:4,
from /work/src/linux-2.6.0-test4/include/linux/slab.h:15,
from test.c:8:/work/src/linux-2.6.0-test4/include/asm/mpspec.h:6:25: mach_mpspec.h: No such file or directory /work/src/linux-2.6.0-test4/include/asm/mpspec.h:8: `MAX_MP_BUSSES' undeclared here (not in a function)
gcc -g -D__KERNEL__ -DMODULE -I/work/src/linux-2.6.0-test4/include \ -I/work/src/linux-2.6.0-test4/drivers/scsi -c test.c
// -- snip sample
#include <linux/version.h> // 2.6 ++
#include <linux/config.h> // 2.6 ++
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/spinlock.h>
#include <asm/io.h>
#include <asm/system.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#define MEMORY_TABLE_SIZE 512
void *my_kmalloc(unsigned int size, char *id)
{
char *ptr ;
if ((ptr =
kmalloc(size,
(in_interrupt()? GFP_ATOMIC : GFP_KERNEL))) == NULL) {
kprintf("Cannot allocate %u bytes for %s\n", size, id);
}
}On Thu, 4 Sep 2003 15:02:33 -0700 (PDT) j d <[email protected]> wrote:
| Hi. | I'm trying to build a (add-on) module | on a machine booted from a 2.6-test4 kernel, | And keep running into this error. I've | included a sample program , and gcc command | line. | | I built the kernel: | | make defconfig; | | It is a 2W SMP (Compaq ML850) | couple minor modes like enet & SCSI device | make | My general question is, should I include the | | -I/work/src/<build>/include/asm-i386/mach-generic/mach_mpspec.h | | in my gcc command line or is my build area incorrect | is | some way that the correct mpspec.h file can't be found
See linux/Documentation/modules.txt and Documentation/kbuild/makefiles.txt for how to do this properly. Basically put your source and Makefile in a subdir, then use this command and it builds without that error. (Your source had a few other warnings, but it does build this way.)
Here's the Makefile that I used, with usage info in it:
# makefile for addonmodule # Randy Dunlap, 2003-02-21 # usage: # cd /path/to/kernel/source && make SUBDIRS=/path/to/source/addonmodule/ modules
obj-m := addonmodule.o
--
~Randy