usb_control/bulk_msg: timeout / NETDEV WATCHDOG: eth0: transmit timed out
Hi,
Anybody know what's up with this? Running 2.4.23-pre3 I get the following while booting up:
usb_control/bulk_msg: timeoutusb.c: USB device not accepting new address=3 (error=-110) NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status 00 status e601.
diagnostics: net 0cc0 media 88c0 dma 0000003b.
eth0: Interrupt posted but not delivered -- IRQ blocked by another device?
Flags; bus-master 1, dirty 16(0) current 16(0)
Transmit list 00000000 vs. c15eb200.
0: @c15eb200 length 8000002a status 0000002a 1: @c15eb240 length 8000002a status 0000002a 2: @c15eb280 length 8000002a status 0000002a 3: @c15eb2c0 length 8000002a status 0000002a 4: @c15eb300 length 8000002a status 0000002a 5: @c15eb340 length 8000002a status 0000002a 6: @c15eb380 length 8000002a status 0000002a 7: @c15eb3c0 length 8000002a status 0000002a 8: @c15eb400 length 8000002a status 0000002a 9: @c15eb440 length 8000002a status 0000002a 10: @c15eb480 length 8000002a status 0000002a 11: @c15eb4c0 length 8000002a status 0000002a 12: @c15eb500 length 8000002a status 0000002a 13: @c15eb540 length 8000002a status 0000002a 14: @c15eb580 length 8000002a status 8000002a 15: @c15eb5c0 length 8000002a status 8000002a
eth0: Resetting the Tx ring pointer.
NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status 00 status e601.
diagnostics: net 0cc0 media 88c0 dma 0000003b.
eth0: Interrupt posted but not delivered -- IRQ blocked by another device?
Flags; bus-master 1, dirty 32(0) current 32(0)
Transmit list 00000000 vs. c15eb200.
0: @c15eb200 length 8000002a status 0000002a 1: @c15eb240 length 8000002a status 0000002a 2: @c15eb280 length 8000002a status 0000002a 3: @c15eb2c0 length 80000049 status 00000049 4: @c15eb300 length 80000049 status 00000049 5: @c15eb340 length 80000049 status 00000049 6: @c15eb380 length 80000049 status 00000049 7: @c15eb3c0 length 80000049 status 00000049 8: @c15eb400 length 80000049 status 00000049 9: @c15eb440 length 80000049 status 00000049 10: @c15eb480 length 80000049 status 00000049 11: @c15eb4c0 length 80000049 status 00000049 12: @c15eb500 length 8000004c status 0000004c 13: @c15eb540 length 8000004c status 0000004c 14: @c15eb580 length 8000004c status 8000004c 15: @c15eb5c0 length 8000004c status 8000004c
eth0: Resetting the Tx ring pointer.
..
..
Signature · 1 line
L1: khromy ;khromy (at) lnuxlab.ath.cx
Quoted 10 lines · [email protected] (khromy) wrote:
Anybody know what's up with this? Running 2.4.23-pre3 I get the following while booting up:
usb_control/bulk_msg: timeout
usb.c: USB device not accepting new address=3 (error=-110) NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out,tx_status00 status e601.
diagnostics: net 0cc0 media 88c0 dma0000003b.
eth0: Interrupt posted but not delivered -- IRQ blocked by another device?
I'd be suspecting ACPI changes broke the IRQ routing to the network card.
Try disabling ACPI.
Quoted 12 lines · Andrew Morton
Quoted 10 lines · [email protected] (khromy) wrote:
Anybody know what's up with this? Running 2.4.23-pre3 I get the following while booting up:
usb_control/bulk_msg: timeout
usb.c: USB device not accepting new address=3 (error=-110) NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out,tx_status00 status e601.
diagnostics: net 0cc0 media 88c0 dma0000003b.
eth0: Interrupt posted but not delivered -- IRQ blocked by another device?
Quoted 3 lines
I'd be suspecting ACPI changes broke the IRQ routing to the network card.
Try disabling ACPI.
Yes, that did it.
Signature · 1 line
L1: khromy ;khromy (at) lnuxlab.ath.cx