Skip to contentSkip to conversation

usb_control/bulk_msg: timeout / NETDEV WATCHDOG: eth0: transmit timed out

DISCUSSION khromy 2 participants 3 messages Sep 10, 2003

lore
Share & tools
lore

khromy

author
#0 lore raw

Hi,

Anybody know what's up with this? Running 2.4.23-pre3 I get the following while booting up:

usb_control/bulk_msg: timeout
usb.c: USB device not accepting new address=3 (error=-110) NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status 00 status e601.
diagnostics: net 0cc0 media 88c0 dma 0000003b.
eth0: Interrupt posted but not delivered -- IRQ blocked by another device?
Flags; bus-master 1, dirty 16(0) current 16(0)
Transmit list 00000000 vs. c15eb200.

  0: @c15eb200  length 8000002a status 0000002a
  1: @c15eb240  length 8000002a status 0000002a
  2: @c15eb280  length 8000002a status 0000002a
  3: @c15eb2c0  length 8000002a status 0000002a
  4: @c15eb300  length 8000002a status 0000002a
  5: @c15eb340  length 8000002a status 0000002a
  6: @c15eb380  length 8000002a status 0000002a
  7: @c15eb3c0  length 8000002a status 0000002a
  8: @c15eb400  length 8000002a status 0000002a
  9: @c15eb440  length 8000002a status 0000002a
  10: @c15eb480  length 8000002a status 0000002a
  11: @c15eb4c0  length 8000002a status 0000002a
  12: @c15eb500  length 8000002a status 0000002a
  13: @c15eb540  length 8000002a status 0000002a
  14: @c15eb580  length 8000002a status 8000002a
  15: @c15eb5c0  length 8000002a status 8000002a

eth0: Resetting the Tx ring pointer.
NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status 00 status e601.
diagnostics: net 0cc0 media 88c0 dma 0000003b.
eth0: Interrupt posted but not delivered -- IRQ blocked by another device?
Flags; bus-master 1, dirty 32(0) current 32(0)
Transmit list 00000000 vs. c15eb200.

  0: @c15eb200  length 8000002a status 0000002a
  1: @c15eb240  length 8000002a status 0000002a
  2: @c15eb280  length 8000002a status 0000002a
  3: @c15eb2c0  length 80000049 status 00000049
  4: @c15eb300  length 80000049 status 00000049
  5: @c15eb340  length 80000049 status 00000049
  6: @c15eb380  length 80000049 status 00000049
  7: @c15eb3c0  length 80000049 status 00000049
  8: @c15eb400  length 80000049 status 00000049
  9: @c15eb440  length 80000049 status 00000049
  10: @c15eb480  length 80000049 status 00000049
  11: @c15eb4c0  length 80000049 status 00000049
  12: @c15eb500  length 8000004c status 0000004c
  13: @c15eb540  length 8000004c status 0000004c
  14: @c15eb580  length 8000004c status 8000004c
  15: @c15eb5c0  length 8000004c status 8000004c

eth0: Resetting the Tx ring pointer.

..
..

Signature · 1 line
L1:	khromy		;khromy (at) lnuxlab.ath.cx
#1 lore raw
Quoted 10 lines · [email protected] (khromy) wrote:

Anybody know what's up with this? Running 2.4.23-pre3 I get the following while booting up:

usb_control/bulk_msg: timeout
usb.c: USB device not accepting new address=3 (error=-110) NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status 00 status e601.
diagnostics: net 0cc0 media 88c0 dma 0000003b.
eth0: Interrupt posted but not delivered -- IRQ blocked by another device?

I'd be suspecting ACPI changes broke the IRQ routing to the network card.

Try disabling ACPI.

author
#2 lore raw
Quoted 12 lines · Andrew Morton
Quoted 10 lines · [email protected] (khromy) wrote:

Anybody know what's up with this? Running 2.4.23-pre3 I get the following while booting up:

usb_control/bulk_msg: timeout
usb.c: USB device not accepting new address=3 (error=-110) NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status 00 status e601.
diagnostics: net 0cc0 media 88c0 dma 0000003b.
eth0: Interrupt posted but not delivered -- IRQ blocked by another device?

Quoted 3 lines

I'd be suspecting ACPI changes broke the IRQ routing to the network card.

Try disabling ACPI.

Yes, that did it.

Signature · 1 line
L1:	khromy		;khromy (at) lnuxlab.ath.cx