Runtime joystick detection & snd-ens1371
Hello,
I have an Ensoniq ES1371 with a joystick port, so the joystick driver depends on the snd-ens1371 (I use alsa) module to be loaded.
With this line in /etc/modprobe.conf, I can use the joystick as soon as the sound module is loaded.
install snd-ens1371 /sbin/modprobe -i snd-ens1371; \
/usr/sbin/alsactl restore; \
/sbin/modprobe -iq joydev; \
/sbin/modprobe -iq analogBut I'd like to be able to use the joystick without manually loading the sound module. With 2.4 I would put "alias char-major-XX sound" in /etc/modules.conf with XX being js0 major number. Unfortunately, with 2.6 if I cat /dev/js0 without the sound module loaded, it does not find the joystick but does not try to load any module on which I could hook.
Also, between 2.6.0-test5 and 2.6.0-test6 my joystick stopped working properly. When cat'ting /dev/js0 I still can get some output when I play with the joystick but xmms using ioctl(joy_fd, JSIOCGBUTTONS, &joy_buttons);
sees 0 buttons for my joysticks which has 4.
Not sure if it helps, but my not so trained eyes see much more output with 2.6.0-test6 than 2.6.0-test5 with cat /dev/js0 and me playing with the joystick.
Thanks for any help.
Guillaume.