Skip to contentSkip to conversation

Runtime joystick detection & snd-ens1371

DISCUSSION Guillaume Chazarain 1 participant 1 message Oct 9, 2003

lore
Share & tools
lore
#0 lore raw

Hello,

I have an Ensoniq ES1371 with a joystick port, so the joystick driver depends on the snd-ens1371 (I use alsa) module to be loaded.

With this line in /etc/modprobe.conf, I can use the joystick as soon as the sound module is loaded.

install snd-ens1371 /sbin/modprobe -i snd-ens1371; \
                    /usr/sbin/alsactl restore;     \
                    /sbin/modprobe -iq joydev;     \
                    /sbin/modprobe -iq analog

But I'd like to be able to use the joystick without manually loading the sound module. With 2.4 I would put "alias char-major-XX sound" in /etc/modules.conf with XX being js0 major number. Unfortunately, with 2.6 if I cat /dev/js0 without the sound module loaded, it does not find the joystick but does not try to load any module on which I could hook.

Also, between 2.6.0-test5 and 2.6.0-test6 my joystick stopped working properly. When cat'ting /dev/js0 I still can get some output when I play with the joystick but xmms using ioctl(joy_fd, JSIOCGBUTTONS, &joy_buttons);
sees 0 buttons for my joysticks which has 4.

Not sure if it helps, but my not so trained eyes see much more output with 2.6.0-test6 than 2.6.0-test5 with cat /dev/js0 and me playing with the joystick.

Thanks for any help.
Guillaume.