ALi shouthbridge. alpha tester wanted.
Can someone please test ftp://ftp.poupinou.org/cpufreq/speedstep-ali.trunk.diff
Note that this is agaist 2.6.0-testX, not 2.4.
Signature · 11 lines
Ducrot Bruno -- Which is worse: ignorance or apathy? -- Don't know. Don't care. -- Ducrot Bruno -- Which is worse: ignorance or apathy? -- Don't know. Don't care.
Quoted 6 lines · Ducrot Bruno
Can someone please test ftp://ftp.poupinou.org/cpufreq/speedstep-ali.trunk.diff
Note that this is agaist 2.6.0-testX, not 2.4.
OK. It do not work. Sorry.
What it does is to turn on geyserville functionality on the PMU device, then, (I guess) we can use the geyserville IO register (at pmbase + 0x2f), as for the -ich case. Unfortunately, that is wrong. I don't know what to do next. For people interrested in some registers that have to be looked, get ftp://ftp.poupinou.org/dont_use/README.ali
Signature · 4 lines
Ducrot Bruno -- Which is worse: ignorance or apathy? -- Don't know. Don't care.
Quoted 8 lines · Ducrot Bruno
Quoted 6 lines · Ducrot Bruno
Can someone please test ftp://ftp.poupinou.org/cpufreq/speedstep-ali.trunk.diff
Note that this is agaist 2.6.0-testX, not 2.4.
Quoted 7 lines
OK. It do not work. Sorry.
What it does is to turn on geyserville functionality on the PMU device, then, (I guess) we can use the geyserville IO register (at pmbase +
0x2f), as for the -ich case. Unfortunately, that is wrong. I don't know what to do next. For people interrested in some registers that have to be looked, get ftp://ftp.poupinou.org/dont_use/README.ali
Grumble. Just found a stupid bug. Forget that email. I still don't know if that work, though. Sorry for noise.
Signature · 4 lines
Ducrot Bruno -- Which is worse: ignorance or apathy? -- Don't know. Don't care.
Quoted 3 lines · Ducrot Bruno
Can someone please test ftp://ftp.poupinou.org/cpufreq/speedstep-ali.trunk.diff
Hi!
Tried this on HP VT6200 notebook with P4M at 1700MHz running 2.6.0-test9 with APM (without ACPI).
Here is my dmesg output after "modprobe speedstep_ali":
cpufreq: read at pmbase 0x8000 + 0x2f returned 0x1
cpufreq: writing 0x1 to pmbase 0x8000 + 0x50
cpufreq: read at pmbase 0x8000 + 0x50 returned 0x1
cpufreq: change to 1700 MHz succeeded
cpufreq: read at pmbase 0x8000 + 0x2f returned 0x1
cpufreq: writing 0x0 to pmbase 0x8000 + 0x50
cpufreq: read at pmbase 0x8000 + 0x50 returned 0x0
cpufreq: change to 1700 MHz succeeded
It didn't create cpufreq directory on /sys/devices/system/cpu/cpu0 as p4-clockmod does, so I don't know what to do next...
Rafal
Quoted 18 lines · Rafal Dejewski
Quoted 3 lines · Ducrot Bruno
Can someone please test ftp://ftp.poupinou.org/cpufreq/speedstep-ali.trunk.diff
Hi!
Tried this on HP VT6200 notebook with P4M at 1700MHz running 2.6.0-test9 with APM (without ACPI).Here is my dmesg output after "modprobe
speedstep_ali":
cpufreq: read at pmbase0x8000+0x2freturned0x1
cpufreq: writing0x1to pmbase0x8000+0x50
cpufreq: read at pmbase0x8000+0x50returned0x1
cpufreq: change to 1700 MHz succeeded
cpufreq: read at pmbase0x8000+0x2freturned0x1
cpufreq: writing0x0to pmbase0x8000+0x50
cpufreq: read at pmbase0x8000+0x50returned0x0
cpufreq: change to 1700 MHz succeeded
Quoted 3 lines
It didn't create cpufreq directory on
/sys/devices/system/cpu/cpu0as p4-clockmod does, so I don't know what to do next...
Can you please send me the output of lspci -xxx, thanks,
Signature · 4 lines
Ducrot Bruno -- Which is worse: ignorance or apathy? -- Don't know. Don't care.
Quoted 2 lines · Ducrot Bruno
Can you please send me the output of lspci -xxx, thanks,
Lspci attached.
Don't know if this helps: when I commented out line with "return result;" from speedstep_cpu_init function from speedstep-ali.c I did get cpufreq directory in /sys. Both scalling_min_freq and scaling_max_freq where equal to 1700000.
Rafal
_______________________________________________
Cpufreq mailing list
[email protected]
http://www.linux.org.uk/mailman/listinfo/cpufreq