Skip to contentSkip to conversation

Tascam US-122: tascam_firmware-0.1 and alsa-firmware

DISCUSSION JoDaY 4 participants 6 messages Nov 27, 2003 – Nov 30, 2003

lore
Share & tools
lore

JoDaY

author
#0 lore raw

Hi,

I've succesfully installed tascam_firmware-0.1 from
http://usb-midi-fw.sf.net :

The Tascam US-122 is "LED lighted", the firmwares are loaded.(by hotplug)

I've just compiled cvs version of alsa (2003/11/27)

All seems ok: lsmod command show this modules:

snd-usb-usx2y
snd-usb-audio
snd-rawmidi
snd-seq-device
snd-pcm
snd-timer
snd-hwdep
snd-page-alloc
snd
usbcore

May I ask you if the alsa-firmware and tascam_firmware-0.1 meet them in conflict ?

I can see a link USX2Y in /proc/asound wich point to card0.

But I can't see it in any mixer: alsamixer return No mixer elems found.

Thanks for your great work!

Hope this is the right mailing list.

JoDaY.

-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/

#1 lore raw

At Thu, 27 Nov 2003 15:35:22 +0100,

Quoted 5 lines · JoDaY

Hi,

I've succesfully installed tascam_firmware-0.1 from
http://usb-midi-fw.sf.net :

the newer version is already incldued in alsa-tools package, usx2loader. you'll need the firmware for that in alsa-firmware package, too.

Takashi

-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/

#2 lore raw
In reply to JoDaY

Am Donnerstag, 27. November 2003 15:35 schrieb JoDaY:

Quoted 4 lines

Hi,

I've succesfully installed tascam_firmware-0.1 from
http://usb-midi-fw.sf.net :

this is not needed anymore. please try alsa-tools/usx2yloader from cvs or 1.0.0pre3.
It is based an the works of usb-midi-fw.sf.net (Thanks !!) and integrates with alsa hwdep-layer and hotplug.

Quoted 18 lines

The Tascam US-122 is "LED lighted", the firmwares are loaded.(by hotplug)

I've just compiled cvs version of alsa (2003/11/27)

All seems ok: lsmod command show this modules:

snd-usb-usx2y
snd-usb-audio
snd-rawmidi
snd-seq-device
snd-pcm
snd-timer
snd-hwdep
snd-page-alloc
snd
usbcore

Quoted 2 lines

May I ask you if the alsa-firmware and tascam_firmware-0.1 meet them in conflict ?

don't really remember. usx2yloader uses the alsa hwdep-layer to download the firmware. please try usx2yloader.

Quoted 4 lines

I can see a link USX2Y in /proc/asound wich point to card0.

But I can't see it in any mixer: alsamixer return No mixer elems found.

there is no mixer support yet. but it is certainly implementable ;-)

Quoted 2 lines

Thanks for your great work!

you're welcome!

Karsten

-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/

#3 lore raw
Quoted 5 lines · Karsten Wiese

Am Donnerstag, 27. November 2003 15:35 schrieb JoDaY:

Quoted 2 lines

But I can't see it in any mixer: alsamixer return No mixer elems found.

there is no mixer support yet. but it is certainly implementable ;-)

The mixer is implemented in the hardware: some knobs for changing input or output level and a switch for changing the input source! It's absolutely mixerless on the sw side and the windows driver is also mixerless (IIRC).

Finally: Play/Record/MIDI will work without such software mixer!

martin

Signature · 8 lines
The only nice thing about spam is that it doesn't ring.


-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
Does SourceForge.net help you be more productive?  Does it
help you create better code?  SHARE THE LOVE, and help us help
YOU!  Click Here: http://sourceforge.net/donate/
author
#4 lore raw

Hi,

Thanks for your quicker reponses Takashi Iwai, Karsten Wiese, Marten Langer !

Quoted 10 lines · Martin Langer
Quoted 6 lines · Karsten Wiese

Am Donnerstag, 27. November 2003 15:35 schrieb JoDaY:

Quoted 1 line

But I can't see it in any mixer: alsamixer return No mixer elems found.

there is no mixer support yet. but it is certainly implementable ;-)

Quoted 7 lines

The mixer is implemented in the hardware: some knobs for changing input or output level and a switch for changing the input source! It's absolutely mixerless on the sw side and the windows driver is also mixerless (IIRC).

Finally: Play/Record/MIDI will work without such software mixer!

martin

It's ok :) I'm sorry for my bad question ... I should have ask you where can I reach the US-122, my problem in fact is that I can't find this card in /dev in order to point a sound or midi player to it so that the US-122 make noise (sound :) ).

I've also noticed that the Midi in LED is lighting, the US-122 's owner doesn't seem to have this when he uses it on windows.

I use the cvs version from 2003/11/27.

I'm working on Knoppix, my aim is to make one with US-122 support, US-122 is now lighting on live-cd when hotplug is starting :)

Ps: I hope my english is understanding ;)

Bien le bonjour de Normandie !

JoDaY

-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/

#5 lore raw
Quoted 5 lines · JoDaY

It's ok :) I'm sorry for my bad question ... I should have ask you where can I reach the US-122, my problem in fact is that I can't find this card in /dev in order to point a sound or midi player to it so that the US-122 make noise (sound :) ).

The card should be listed in /proc/asound/cards.

aplay, arecord, aconnect and pmidi are running fine here (with alsa access).

What do you try? OSS access (/dev/dspX)?
Have you ever run ./snddevices in alsa-driver?

Quoted 2 lines

I've also noticed that the Midi in LED is lighting, the US-122 's owner doesn't seem to have this when he uses it on windows.

Hmmm, my LED is only burning when MIDI data is passing the port. But if you send weird data to the port it will burn until christmas, that's correct. I don't know how to reset it. I guess the solution is somewhere in the firmware, but the firmware is the original Tascam/Frontier firmware and we've never got any docs from them. And I fear we don't get them in the future :-(
Nevertheless my MIDI keyboard at MIDI IN doesn't produce errors and the LED is only blinking. Same with pmidi during sending data to MIDI OUT. In both cases it will stop blinking if no MIDI data is passing the ports.

martin

Signature · 8 lines
The only nice thing about spam is that it doesn't ring.


-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
Does SourceForge.net help you be more productive?  Does it
help you create better code?  SHARE THE LOVE, and help us help
YOU!  Click Here: http://sourceforge.net/donate/