Tascam US-122: tascam_firmware-0.1 and alsa-firmware
Hi,
I've succesfully installed tascam_firmware-0.1 from
http://usb-midi-fw.sf.net :
The Tascam US-122 is "LED lighted", the firmwares are loaded.(by hotplug)
I've just compiled cvs version of alsa (2003/11/27)
All seems ok: lsmod command show this modules:
snd-usb-usx2y
snd-usb-audio
snd-rawmidi
snd-seq-device
snd-pcm
snd-timer
snd-hwdep
snd-page-alloc
snd
usbcore
May I ask you if the alsa-firmware and tascam_firmware-0.1 meet them in conflict ?
I can see a link USX2Y in /proc/asound wich point to card0.
But I can't see it in any mixer: alsamixer return No mixer elems found.
Thanks for your great work!
Hope this is the right mailing list.
JoDaY.
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/
At Thu, 27 Nov 2003 15:35:22 +0100,
Quoted 5 lines · JoDaY
Hi,
I've succesfully installed tascam_firmware-0.1 from
http://usb-midi-fw.sf.net :
the newer version is already incldued in alsa-tools package, usx2loader. you'll need the firmware for that in alsa-firmware package, too.
Takashi
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/
Am Donnerstag, 27. November 2003 15:35 schrieb JoDaY:
Quoted 4 lines
Hi,
I've succesfully installed tascam_firmware-0.1 from
http://usb-midi-fw.sf.net :
this is not needed anymore. please try alsa-tools/usx2yloader from cvs or 1.0.0pre3.
It is based an the works of usb-midi-fw.sf.net (Thanks !!) and integrates with alsa hwdep-layer and hotplug.
Quoted 18 lines
The Tascam US-122 is "LED lighted", the firmwares are loaded.(by hotplug)
I've just compiled cvs version of alsa (2003/11/27)
All seems ok: lsmod command show this modules:
snd-usb-usx2y
snd-usb-audio
snd-rawmidi
snd-seq-device
snd-pcm
snd-timer
snd-hwdep
snd-page-alloc
snd
usbcore
Quoted 2 lines
May I ask you if the alsa-firmware and tascam_firmware-0.1 meet them in conflict ?
don't really remember. usx2yloader uses the alsa hwdep-layer to download the firmware. please try usx2yloader.
Quoted 4 lines
I can see a link USX2Y in
/proc/asoundwich point to card0.But I can't see it in any mixer: alsamixer return No mixer elems found.
there is no mixer support yet. but it is certainly implementable ;-)
Quoted 2 lines
Thanks for your great work!
you're welcome!
Karsten
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/
Quoted 5 lines · Karsten Wiese
Am Donnerstag, 27. November 2003 15:35 schrieb JoDaY:
Quoted 2 lines
But I can't see it in any mixer: alsamixer return No mixer elems found.
there is no mixer support yet. but it is certainly implementable ;-)
The mixer is implemented in the hardware: some knobs for changing input or output level and a switch for changing the input source! It's absolutely mixerless on the sw side and the windows driver is also mixerless (IIRC).
Finally: Play/Record/MIDI will work without such software mixer!
martin
Signature · 8 lines
The only nice thing about spam is that it doesn't ring. ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/
Hi,
Thanks for your quicker reponses Takashi Iwai, Karsten Wiese, Marten Langer !
Quoted 10 lines · Martin Langer
Quoted 6 lines · Karsten Wiese
Am Donnerstag, 27. November 2003 15:35 schrieb JoDaY:
Quoted 1 line
But I can't see it in any mixer: alsamixer return No mixer elems found.
there is no mixer support yet. but it is certainly implementable ;-)
Quoted 7 lines
The mixer is implemented in the hardware: some knobs for changing input or output level and a switch for changing the input source! It's absolutely mixerless on the sw side and the windows driver is also mixerless (IIRC).
Finally: Play/Record/MIDI will work without such software mixer!
martin
It's ok :) I'm sorry for my bad question ... I should have ask you where can I reach the US-122, my problem in fact is that I can't find this card in /dev in order to point a sound or midi player to it so that the US-122 make noise (sound :) ).
I've also noticed that the Midi in LED is lighting, the US-122 's owner doesn't seem to have this when he uses it on windows.
I use the cvs version from 2003/11/27.
I'm working on Knoppix, my aim is to make one with US-122 support, US-122 is now lighting on live-cd when hotplug is starting :)
Ps: I hope my english is understanding ;)
Bien le bonjour de Normandie !
JoDaY
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/
Quoted 5 lines · JoDaY
It's ok :) I'm sorry for my bad question ... I should have ask you where can I reach the US-122, my problem in fact is that I can't find this card in /dev in order to point a sound or midi player to it so that the US-122 make noise (sound :) ).
The card should be listed in /proc/asound/cards.
aplay, arecord, aconnect and pmidi are running fine here (with alsa access).
What do you try? OSS access (/dev/dspX)?
Have you ever run ./snddevices in alsa-driver?
Quoted 2 lines
I've also noticed that the Midi in LED is lighting, the US-122 's owner doesn't seem to have this when he uses it on windows.
Hmmm, my LED is only burning when MIDI data is passing the port. But if you send weird data to the port it will burn until christmas, that's correct. I don't know how to reset it. I guess the solution is somewhere in the firmware, but the firmware is the original Tascam/Frontier firmware and we've never got any docs from them. And I fear we don't get them in the future :-(
Nevertheless my MIDI keyboard at MIDI IN doesn't produce errors and the LED is only blinking. Same with pmidi during sending data to MIDI OUT. In both cases it will stop blinking if no MIDI data is passing the ports.
martin
Signature · 8 lines
The only nice thing about spam is that it doesn't ring. ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/