HPT366 ate my IDE controllers
When I boot 2.6.0test11 on my Abit BP6, it *only* sees the HPT366 controllers. The other 2 controllers built in to the mobo don't show up at all. All I see is what's plugged into the 2 HPT366 controllers.
So my root partition, which resides on /dev/hde1 with 2.4.20, becomes /dev/hda1. And my extra partitions that were on /dev/hdg are on /dev/hdc. This wouldn't be a problem accept that what was on /dev/hda and hdc are now gone.
What would cause the kernel to totally ignore the built in controllers?
Signature · 1 line
Rahsheen Porter <[email protected]>
Quoted 5 lines · Rahsheen Porter Sr.
When I boot 2.6.0test11 on my Abit BP6, it *only* sees the HPT366 controllers. The other 2 controllers built in to the mobo don't show up at all. All I see is what's plugged into the 2 HPT366 controllers.
Quoted 7 lines
So my root partition, which resides on
/dev/hde1with 2.4.20, becomes/dev/hda1. And my extra partitions that were on/dev/hdgare on/dev/hdc. This wouldn't be a problem accept that what was on/dev/hdaand hdc are now gone.What would cause the kernel to totally ignore the built in controllers?
I'd bet a small amount that there is something in the bios you've set that is making that decision for you. Probably a boot offboard controllers first or some such.
Signature · 7 lines
Cheers, Gene AMD K6-III@500mhz 320M Athlon1600XP@1400mhz 512M 99.27% setiathome rank, not too shabby for a WV hillbilly Yahoo.com attornies please note, additions to this message by Gene Heskett are: Copyright 2003 by Maurice Eugene Heskett, all rights reserved.