Skip to contentSkip to conversation

no sound with 1.0.0 release

DISCUSSION Noel Bush 2 participants 2 messages Dec 12, 2003 – Dec 14, 2003

lore
Share & tools
lore

Noel Bush

author
#0 lore raw

I am using the planetccrma-core distribution. Recently I tried upgrading, via that distro, to the alsa 1.0.0 packages. I found that after this upgrade, I was unable to hear any sound when using any app (simplest test, using aplay on a wav file). I did make sure that all relevant controls were unmuted. I found that all alsa modules were indeed loaded. There were no error messages when starting the alsasound service, and no error messages when running any sound apps (alsamixer, aplay, ecasound, etc.) Using ecasignalview showed the meter bouncing up and down...no sound. I was only able to regain sound by downgrading to the 0.9.8 version.

Here I will try to provide all relevant info; please let me know what else I can provide to help.

The packages to which I upgraded:

# rpm -qa | grep ^alsa
alsa-firmware-1.0.0-1.rc2.cvs.rhfc1.ccrma
alsa-driver-1.0.0-1.rc2.cvs.rhfc1.ccrma
alsa-lib-1.0.0-1.rc2.cvs.rhfc1.ccrma
alsaplayer-0.99.75-1.rhfc1.ccrma
alsa-utils-1.0.0-1.rc2.cvs.rhfc1.ccrma
alsa-tools-1.0.0-1.rc2.cvs.rhfc1.ccrma
alsa-kernel-2.4.23-1.ll.rhfc1.ccrma-1.0.0-1.rc2.cvs.rhfc1.ccrma
alsa-lib-devel-1.0.0-1.rc2.cvs.rhfc1.ccrma

The kernel I was using:

# uname -r
2.4.23-1.ll.rhfc1.ccrma

Output from lspci about my soundcard:

# lspci -v -v
[...]
01:0a.0 Multimedia audio controller: Creative Labs SB Audigy (rev 03)
        Subsystem: Creative Labs SB0090 Audigy Player
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (500ns min, 5000ns max)
        Interrupt: pin A routed to IRQ 5
        Region 0: I/O ports at c400 [size=32]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
[...]

The packages to which I downgraded in order to get sound:

alsa-lib-devel-0.9.8-2.cvs.rhfc1.ccrma
alsa-driver-0.9.8-2.cvs.rhfc1.ccrma
alsa-utils-0.9.8-2.cvs.rhfc1.ccrma
alsa-tools-0.9.8-2.cvs.rhfc1.ccrma
alsa-lib-0.9.8-2.cvs.rhfc1.ccrma

I should note that, even with these packages installed, I cannot get sound if I boot with the 2.4.23-1.ll.rhfc1.ccrma kernel. Currently I am using:

# uname -r
2.4.21-1.ll.acpi

Right now, all of the following alsa-kernel packages are installed (and I am scared to remove any of them!):

# rpm -qa | grep ^alsa-kernel
alsa-kernel-2.4.23-1.ll.rhfc1.ccrma-1.0.0-1.rc2.cvs.rhfc1.ccrma
alsa-kernel-2.4.22-1.2129.nptl.caps.rhfc1.ccrma-1.0.0-1.rc2.cvs.rhfc1.ccrma
alsa-kernel-2.4.22-1.2115.nptl.caps.rhfc1.ccrma-0.9.8-2.cvs.rhfc1.ccrma
alsa-kernel-2.4.21-1.ll.acpi-0.9.4-2.cvs

Hope this is useful, and let me know if I can provide more info.

-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/

#1 lore raw

Hallo,

Quoted 4 lines · Noel Bush hat gesagt: // Noel Bush wrote:

I am using the planetccrma-core distribution. Recently I tried upgrading, via that distro, to the alsa 1.0.0 packages. I found that after this upgrade, I was unable to hear any sound when using any app (simplest test, using aplay on a wav file).

I have no real idea why this is so, but here often it helped to remove the file /etc/asound.state while ALSA isn't running and then start ALSA again.

ciao

Signature · 8 lines
 Frank Barknecht                               _ ______footils.org__


-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
Does SourceForge.net help you be more productive?  Does it
help you create better code?  SHARE THE LOVE, and help us help
YOU!  Click Here: http://sourceforge.net/donate/