IPsec and u32 filters
Hi,
how can I filter IPsec traffic with u32 filters?
I know IPsec needs Port 500/UDP and IP protocols 50 and 51. I know how to get the port stuff, but how can I make u32 to match the protocol number?
thx,
cb
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 4 lines · Cord Buhlert
how can I filter IPsec traffic with u32 filters?
I know IPsec needs Port 500/UDP and IP protocols 50 and 51. I know how to get the port stuff, but how can I make u32 to match the protocol number?
Same as matching tcp packets:
match ip protocol 0x32 0xff
(ESP proto 50)
or
match ip protocol 0x33 0xff
(AH proto 51)
regards
Signature · 11 lines
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Damion de Soto - Software Engineer email: [email protected] SnapGear - A CyberGuard Company --- ph: +61 7 3435 2809 | Custom Embedded Solutions fax: +61 7 3891 3630 | and Security Appliances web: http://www.snapgear.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ --- Free Embedded Linux Distro at http://www.snapgear.org --- _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/