Skip to contentSkip to conversation

IPsec and u32 filters

LARTC Cord Buhlert 2 participants 2 messages Jan 22, 2004

lore
Share & tools
lore
#1 lore raw
Quoted 4 lines · Cord Buhlert

how can I filter IPsec traffic with u32 filters?
I know IPsec needs Port 500/UDP and IP protocols 50 and 51. I know how to get the port stuff, but how can I make u32 to match the protocol number?

Same as matching tcp packets:

match ip protocol 0x32 0xff
(ESP proto 50)
or
match ip protocol 0x33 0xff
(AH proto 51)

regards

Signature · 11 lines
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Damion de Soto - Software Engineer  email:     [email protected]
SnapGear - A CyberGuard Company ---    ph:         +61 7 3435 2809
  | Custom Embedded Solutions          fax:         +61 7 3891 3630
  | and Security Appliances            web: http://www.snapgear.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  ---  Free Embedded Linux Distro at   http://www.snapgear.org  ---

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/