dxs_support detection or feature broken?
I have an ASUS A7V8X motherboard with a VIA VT8233 audio controller equipped with SPDIF. I have a set of digital speakers and use the SPDIF out for everything possible. (The speakers will fall back to analog if there is no digital signal present.)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233 AC97 Audio Controller (rev 50)
For a long time (through 1.0.0rc1) I had been using plug:spdif as my audio device and aplay had no problems playing 22,050 Hz WAV files:
aplay -D plug:spdif <filename>.wav
But with 1.0.1 my speakers started playing 22,050 Hz WAV files at 48,000 Hz.
After reading the following thread:
http://www.mail-archive.com/[email protected]/msg10448.html
I added the following line to my /etc/modules.conf:
options snd-via82xx dxs_support=3
and plug:spdif is working again. One message says "By default snd-via82xx uses dxs_support=3 (except for certain known motherboards)." Either my motherboard should become unknown or this feature is not working correctly.
John
Signature · 8 lines
John GOTTS <[email protected]> http://linuxsavvy.com/staff/jgotts ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn
At Fri, 23 Jan 2004 23:40:18 -0500,
Quoted 19 lines · John Gotts
I have an ASUS A7V8X motherboard with a VIA VT8233 audio controller equipped with SPDIF. I have a set of digital speakers and use the SPDIF out for everything possible. (The speakers will fall back to analog if there is no digital signal present.)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233 AC97 Audio Controller (rev 50)
For a long time (through 1.0.0rc1) I had been using plug:spdif as my audio device and aplay had no problems playing 22,050 Hz WAV files:
aplay -D plug:spdif <filename>.wav
But with 1.0.1 my speakers started playing 22,050 Hz WAV files at 48,000 Hz.
After reading the following thread:
Quoted 7 lines
I added the following line to my
/etc/modules.conf:options snd-via82xx dxs_support=3
and plug:spdif is working again. One message says "By default snd-via82xx uses dxs_support=3 (except for certain known motherboards)." Either my motherboard should become unknown or this feature is not working correctly.
well, the dxs_support detection is correct.
the problem is that spdif doesn't support 22.5kHz but the via82xx driver doesn't restrict the sample rates for spdif.
i guess 44.1khz sample can be played correctly even without "plug".
ok, this bug should be fixed in the future...
a workaround is to define your own pcm such as
pcm.myspdif {
type plug
slave {
pcm "spdif"
rate 48000
}
}and
% apaly -Dmyspdif 22500hz.wav
Takashi
-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
Quoted 49 lines · Takashi Iwai
At Fri, 23 Jan 2004 23:40:18 -0500,
Quoted 6 lines · John Gotts
I have an ASUS A7V8X motherboard with a VIA VT8233 audio controller equipped with SPDIF. I have a set of digital speakers and use the SPDIF out for everything possible. (The speakers will fall back to analog if there is no digital signal present.)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233 AC97 Audi
o Controller (rev 50)
Quoted 9 lines
For a long time (through 1.0.0rc1) I had been using plug:spdif as my audio device and aplay had no problems playing 22,050 Hz WAV files:
aplay -D plug:spdif <filename>.wav
But with 1.0.1 my speakers started playing 22,050 Hz WAV files at 48,000 Hz.
After reading the following thread:
Quoted 7 lines
http://www.mail-archive.com/[email protected]/msg10448.html
I added the following line to my
/etc/modules.conf:options snd-via82xx dxs_support=3
and plug:spdif is working again. One message says "By default snd-via82xx u
ses
Quoted 1 line
dxs_support=3 (except for certain known motherboards)." Either my motherboa
rd
Quoted 1 line
should become unknown or this feature is not working correctly.
well, the
dxs_supportdetection is correct.
the problem is that spdif doesn't support 22.5kHz but the via82xx driver doesn't restrict the sample rates for spdif.
i guess 44.1khz sample can be played correctly even without "plug".ok, this bug should be fixed in the future...
a workaround is to define your own pcm such as
pcm.myspdif { type plug slave { pcm "spdif" rate 48000 } }
Quoted 3 lines
and
% apaly -Dmyspdif 22500hz.wav
Thanks for the workaround. Believe it or not, I used it first, but I thought disabling dxs_support was the better workaround. Now that I know dxs_support works I'll define pcm.fspdif (for functional SPDIF) in my /etc/asound.conf until the bug is fixed.
By the way, congratulations on getting version 1 out the door. I'm glad ALSA is now a standard Linux component. Your hard work has not gone unappreciated.
Thanks,
John
Signature · 8 lines
John GOTTS <[email protected]> http://linuxsavvy.com/staff/jgotts ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn