Skip to contentSkip to conversation

dxs_support detection or feature broken?

DISCUSSION John Gotts 2 participants 3 messages Jan 24, 2004 – Jan 26, 2004

lore
Share & tools
lore

John Gotts

author
#0 lore raw

I have an ASUS A7V8X motherboard with a VIA VT8233 audio controller equipped with SPDIF. I have a set of digital speakers and use the SPDIF out for everything possible. (The speakers will fall back to analog if there is no digital signal present.)

00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233 AC97 Audio Controller (rev 50)

For a long time (through 1.0.0rc1) I had been using plug:spdif as my audio device and aplay had no problems playing 22,050 Hz WAV files:

aplay -D plug:spdif <filename>.wav

But with 1.0.1 my speakers started playing 22,050 Hz WAV files at 48,000 Hz.

After reading the following thread:

http://www.mail-archive.com/[email protected]/msg10448.html

I added the following line to my /etc/modules.conf:

options snd-via82xx dxs_support=3

and plug:spdif is working again. One message says "By default snd-via82xx uses dxs_support=3 (except for certain known motherboards)." Either my motherboard should become unknown or this feature is not working correctly.

John

Signature · 8 lines
John GOTTS <[email protected]>  http://linuxsavvy.com/staff/jgotts


-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
#1 lore raw

At Fri, 23 Jan 2004 23:40:18 -0500,

Quoted 19 lines · John Gotts

I have an ASUS A7V8X motherboard with a VIA VT8233 audio controller equipped with SPDIF. I have a set of digital speakers and use the SPDIF out for everything possible. (The speakers will fall back to analog if there is no digital signal present.)

00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233 AC97 Audio Controller (rev 50)

For a long time (through 1.0.0rc1) I had been using plug:spdif as my audio device and aplay had no problems playing 22,050 Hz WAV files:

aplay -D plug:spdif <filename>.wav

But with 1.0.1 my speakers started playing 22,050 Hz WAV files at 48,000 Hz.

After reading the following thread:

http://www.mail-archive.com/[email protected]/msg10448.html

Quoted 7 lines

I added the following line to my /etc/modules.conf:

options snd-via82xx dxs_support=3

and plug:spdif is working again. One message says "By default snd-via82xx uses dxs_support=3 (except for certain known motherboards)." Either my motherboard should become unknown or this feature is not working correctly.

well, the dxs_support detection is correct.
the problem is that spdif doesn't support 22.5kHz but the via82xx driver doesn't restrict the sample rates for spdif.
i guess 44.1khz sample can be played correctly even without "plug".

ok, this bug should be fixed in the future...

a workaround is to define your own pcm such as

pcm.myspdif {
	type plug
	slave {
		pcm "spdif"
		rate 48000
	}
}

and

	% apaly -Dmyspdif 22500hz.wav

Takashi

-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn

#2 lore raw
Quoted 49 lines · Takashi Iwai

At Fri, 23 Jan 2004 23:40:18 -0500,

Quoted 6 lines · John Gotts

I have an ASUS A7V8X motherboard with a VIA VT8233 audio controller equipped with SPDIF. I have a set of digital speakers and use the SPDIF out for everything possible. (The speakers will fall back to analog if there is no digital signal present.)

00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233 AC97 Audi

o Controller (rev 50)

Quoted 9 lines

For a long time (through 1.0.0rc1) I had been using plug:spdif as my audio device and aplay had no problems playing 22,050 Hz WAV files:

aplay -D plug:spdif <filename>.wav

But with 1.0.1 my speakers started playing 22,050 Hz WAV files at 48,000 Hz.

After reading the following thread:

Quoted 7 lines

http://www.mail-archive.com/[email protected]/msg10448.html

I added the following line to my /etc/modules.conf:

options snd-via82xx dxs_support=3

and plug:spdif is working again. One message says "By default snd-via82xx u

ses

Quoted 1 line

dxs_support=3 (except for certain known motherboards)." Either my motherboa

rd

Quoted 1 line

should become unknown or this feature is not working correctly.

well, the dxs_support detection is correct.
the problem is that spdif doesn't support 22.5kHz but the via82xx driver doesn't restrict the sample rates for spdif.
i guess 44.1khz sample can be played correctly even without "plug".

ok, this bug should be fixed in the future...

a workaround is to define your own pcm such as

pcm.myspdif {
	type plug
	slave {
		pcm "spdif"
		rate 48000
	}
}
Quoted 3 lines

and

	% apaly -Dmyspdif 22500hz.wav

Thanks for the workaround. Believe it or not, I used it first, but I thought disabling dxs_support was the better workaround. Now that I know dxs_support works I'll define pcm.fspdif (for functional SPDIF) in my /etc/asound.conf until the bug is fixed.

By the way, congratulations on getting version 1 out the door. I'm glad ALSA is now a standard Linux component. Your hard work has not gone unappreciated.

Thanks,
John

Signature · 8 lines
John GOTTS <[email protected]>  http://linuxsavvy.com/staff/jgotts


-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn