Skip to contentSkip to conversation

Boot Code Chip Select

U-Boot-Users Raghu 2 participants 2 messages Feb 6, 2004

lore
Share & tools
lore

Raghu

author
#0 lore raw

Hello All,

I have a MPC852T based board with a Boot Flash on CS0 and User Flash on CS2.

Boot Flash mapped at Address 0xFE000000 and User Flash location at Address 0xFA000000.

Can we load the u-boot code on to the User Flash on CS1, and boot from there ? If so what are the changes required ?

Warm Regards,
Raghu.

__________________________________
Do you Yahoo!?
Yahoo! Finance: Get your refund fast by filing online.
http://taxes.yahoo.com/filing.html

#1 lore raw
Quoted 3 lines · In message <[email protected]> you wrote:

I have a MPC852T based board with a Boot Flash on CS0 and User Flash on CS2.

...

Quoted 3 lines

Can we load the u-boot code on to the User Flash on CS1, and boot from there ? If so what are the changes required ?

No, you cannot, unless you modify the processor :-)

The MPC8xx will always boot from the device attached to CS0.

Best regards,

Wolfgang Denk

Signature · 3 lines
See us @ Embedded World, Nuremberg, Feb 17 - 19,  Hall 12.0 Booth 440
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
Anyone who isn't confused here doesn't really know what's going on.