Boot Code Chip Select
Hello All,
I have a MPC852T based board with a Boot Flash on CS0 and User Flash on CS2.
Boot Flash mapped at Address 0xFE000000 and User Flash location at Address 0xFA000000.
Can we load the u-boot code on to the User Flash on CS1, and boot from there ? If so what are the changes required ?
Warm Regards,
Raghu.
__________________________________
Do you Yahoo!?
Yahoo! Finance: Get your refund fast by filing online.
http://taxes.yahoo.com/filing.html
Quoted 3 lines · In message <[email protected]> you wrote:
I have a MPC852T based board with a Boot Flash on CS0 and User Flash on CS2.
...
Quoted 3 lines
Can we load the u-boot code on to the User Flash on CS1, and boot from there ? If so what are the changes required ?
No, you cannot, unless you modify the processor :-)
The MPC8xx will always boot from the device attached to CS0.
Best regards,
Wolfgang Denk
Signature · 3 lines
See us @ Embedded World, Nuremberg, Feb 17 - 19, Hall 12.0 Booth 440 Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de Anyone who isn't confused here doesn't really know what's going on.