Skip to contentSkip to conversation

2.6.3-mm1 and aic7xxx

DISCUSSION Fabio Coatti 2 participants 4 messages Feb 19, 2004 – Feb 21, 2004

lore
Share & tools
lore
#0 lore raw

I'm experiencing some problems with 2.6.3-mm1 release: on boot the system hangs trying to detect scsi devices, and the light on scsi cdrom flashes every few seconds. With 2.6.3-rc3-mm1 all works just fine, and I get this syslog entry:

Feb 19 22:23:15 kefk kernel: ahc_pci:3:6:0: Host Adapter Bios disabled.  Using 
default SCSI device parameters
Feb 19 22:23:15 kefk kernel: scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA 
DRIVER, Rev 6.2.36
Feb 19 22:23:15 kefk kernel:         <Adaptec 2902/04/10/15/20C/30C SCSI 
adapter>
Feb 19 22:23:15 kefk kernel:         aic7850: Single Channel A, SCSI Id=7, 

3/253 SCBs

<<<<<<<<<<<<<<<2.6.3-mm1 hangs here

Feb 19 22:23:15 kefk kernel:
Feb 19 22:23:15 kefk kernel:   Vendor: Nikon     Model: COOLSCANIII       Rev: 
1.31
Feb 19 22:23:15 kefk kernel:   Type:   Scanner                            ANSI 
SCSI revision: 02
Feb 19 22:23:15 kefk kernel: (scsi0:A:3): 10.000MB/s transfers (10.000MHz, 
offset 15)
Feb 19 22:23:15 kefk kernel:   Vendor: PLEXTOR   Model: CD-ROM PX-40TS    Rev: 
1.01
Feb 19 22:23:15 kefk kernel:   Type:   CD-ROM                             ANSI 
SCSI revision: 02
Feb 19 22:23:15 kefk kernel: (scsi0:A:5): 10.000MB/s transfers (10.000MHz, 
offset 15)
Feb 19 22:23:15 kefk kernel:   Vendor: YAMAHA    Model: CRW6416S          Rev: 
1.0c
Feb 19 22:23:15 kefk kernel:   Type:   CD-ROM                             ANSI 

SCSI revision: 02

I've also noticed (only with 2.6.3-mm1) a "PCI BIOS passed non existent PCI BUS 0!" message when it probes ICH5, i.e.

Feb 19 22:23:15 kefk kernel: ICH5: IDE controller at PCI slot 0000:00:1f.1

<<<<<<<<<<<<HERE

Feb 19 22:23:15 kefk kernel: ICH5: chipset revision 2
Feb 19 22:23:15 kefk kernel: ICH5: not 100%% native mode: will probe irqs 
later
Feb 19 22:23:15 kefk kernel:     ide0: BM-DMA at 0xf000-0xf007, BIOS settings: 
hda:DMA, hdb:pio
Feb 19 22:23:15 kefk kernel:     ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: 

hdc:pio, hdd:pio

system: PIV 2.HT/i875p (abit ic7-g), SMP kernel (SMT), gcc (GCC) 3.3.1 (Mandrake Linux 9.2 3.3.1-2mdk)

I can provide more details if needed, and any help will be appreciated.

Thanks.

Signature · 4 lines
Fabio Coatti       http://www.ferrara.linux.it/members/cova     
Ferrara Linux Users Group           http://ferrara.linux.it
GnuPG fp:9765 A5B6 6843 17BC A646  BE8C FA56 373A 5374 C703
Old SysOps never die... they simply forget their password.
#1 lore raw
Quoted 13 lines · Fabio Coatti

I'm experiencing some problems with 2.6.3-mm1 release: on boot the system hangs trying to detect scsi devices, and the light on scsi cdrom flashes every few seconds. With 2.6.3-rc3-mm1 all works just fine, and I get this syslog entry:

Feb 19 22:23:15 kefk kernel: ahc_pci:3:6:0: Host Adapter Bios disabled.  Using 
default SCSI device parameters
Feb 19 22:23:15 kefk kernel: scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA 
DRIVER, Rev 6.2.36
Feb 19 22:23:15 kefk kernel:         <Adaptec 2902/04/10/15/20C/30C SCSI 
adapter>
Feb 19 22:23:15 kefk kernel:         aic7850: Single Channel A, SCSI Id=7, 
Quoted 3 lines

3/253 SCBs

<<<<<<<<<<<<<<<2.6.3-mm1 hangs here

Are you able to get a sysrq-T or sysrq-P trace?

Quoted 2 lines

I've also noticed (only with 2.6.3-mm1) a "PCI BIOS passed non existent PCI BUS 0!" message when it probes ICH5, i.e.

Could be an acpi thing. If you have time, could you try

patch -p1 -R < bk-acpi.patch

and see if that helps?

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.3/2.6.3-mm1/broken-out/bk-acpi.patch

Thanks.

#2 lore raw

Alle 01:21, venerdì 20 febbraio 2004, Andrew Morton ha scritto:

Quoted 6 lines
Quoted 4 lines
Feb 19 22:23:15 kefk kernel:         aic7850: Single Channel A, SCSI

Id=7, 3/253 SCBs

<<<<<<<<<<<<<<<2.6.3-mm1 hangs here

Are you able to get a sysrq-T or sysrq-P trace?

I've just tried, but the system seems completely hung. The only activity is from scsi cdrom device, that blinks a light every 20/30 seconds, more or less. Even Caps/Num/Scroll lock keyboards led are frozen.

(tried also with mm2)

Quoted 9 lines
Quoted 3 lines

I've also noticed (only with 2.6.3-mm1) a "PCI BIOS passed non existent PCI BUS 0!" message when it probes ICH5, i.e.

Could be an acpi thing. If you have time, could you try

patch -p1 -R < bk-acpi.patch

and see if that helps?

At this moment I can't reach kernel.org, some connectivity issue over the ocean, I suppose :)
I'll try again in few hours.

Signature · 4 lines
Fabio Coatti       http://www.ferrara.linux.it/members/cova     
Ferrara Linux Users Group           http://ferrara.linux.it
GnuPG fp:9765 A5B6 6843 17BC A646  BE8C FA56 373A 5374 C703
Old SysOps never die... they simply forget their password.
#3 lore raw
In reply to Andrew Morton

Alle 01:21, venerdì 20 febbraio 2004, Andrew Morton ha scritto:

Quoted 8 lines
Quoted 2 lines

I've also noticed (only with 2.6.3-mm1) a "PCI BIOS passed non existent PCI BUS 0!" message when it probes ICH5, i.e.

Could be an acpi thing. If you have time, could you try

patch -p1 -R < bk-acpi.patch

and see if that helps?

Tried, the error message is disappeared (but my kernel still hangs on scsi detection, so I'm unable if this has other effects :) )

Signature · 4 lines
Fabio Coatti       http://www.ferrara.linux.it/members/cova     
Ferrara Linux Users Group           http://ferrara.linux.it
GnuPG fp:9765 A5B6 6843 17BC A646  BE8C FA56 373A 5374 C703
Old SysOps never die... they simply forget their password.