2.6.3-mm1 and aic7xxx
I'm experiencing some problems with 2.6.3-mm1 release: on boot the system hangs trying to detect scsi devices, and the light on scsi cdrom flashes every few seconds. With 2.6.3-rc3-mm1 all works just fine, and I get this syslog entry:
Feb 19 22:23:15 kefk kernel: ahc_pci:3:6:0: Host Adapter Bios disabled. Using default SCSI device parameters Feb 19 22:23:15 kefk kernel: scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 Feb 19 22:23:15 kefk kernel: <Adaptec 2902/04/10/15/20C/30C SCSI adapter> Feb 19 22:23:15 kefk kernel: aic7850: Single Channel A, SCSI Id=7,
3/253 SCBs
<<<<<<<<<<<<<<<2.6.3-mm1 hangs here
Feb 19 22:23:15 kefk kernel: Feb 19 22:23:15 kefk kernel: Vendor: Nikon Model: COOLSCANIII Rev: 1.31 Feb 19 22:23:15 kefk kernel: Type: Scanner ANSI SCSI revision: 02 Feb 19 22:23:15 kefk kernel: (scsi0:A:3): 10.000MB/s transfers (10.000MHz, offset 15) Feb 19 22:23:15 kefk kernel: Vendor: PLEXTOR Model: CD-ROM PX-40TS Rev: 1.01 Feb 19 22:23:15 kefk kernel: Type: CD-ROM ANSI SCSI revision: 02 Feb 19 22:23:15 kefk kernel: (scsi0:A:5): 10.000MB/s transfers (10.000MHz, offset 15) Feb 19 22:23:15 kefk kernel: Vendor: YAMAHA Model: CRW6416S Rev: 1.0c Feb 19 22:23:15 kefk kernel: Type: CD-ROM ANSI
SCSI revision: 02
I've also noticed (only with 2.6.3-mm1) a "PCI BIOS passed non existent PCI BUS 0!" message when it probes ICH5, i.e.
Feb 19 22:23:15 kefk kernel: ICH5: IDE controller at PCI slot 0000:00:1f.1
<<<<<<<<<<<<HERE
Feb 19 22:23:15 kefk kernel: ICH5: chipset revision 2 Feb 19 22:23:15 kefk kernel: ICH5: not 100%% native mode: will probe irqs later Feb 19 22:23:15 kefk kernel: ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio Feb 19 22:23:15 kefk kernel: ide1: BM-DMA at 0xf008-0xf00f, BIOS settings:
hdc:pio, hdd:pio
system: PIV 2.HT/i875p (abit ic7-g), SMP kernel (SMT), gcc (GCC) 3.3.1 (Mandrake Linux 9.2 3.3.1-2mdk)
I can provide more details if needed, and any help will be appreciated.
Thanks.
Signature · 4 lines
Fabio Coatti http://www.ferrara.linux.it/members/cova Ferrara Linux Users Group http://ferrara.linux.it GnuPG fp:9765 A5B6 6843 17BC A646 BE8C FA56 373A 5374 C703 Old SysOps never die... they simply forget their password.
Quoted 13 lines · Fabio Coatti
I'm experiencing some problems with 2.6.3-mm1 release: on boot the system hangs trying to detect scsi devices, and the light on scsi cdrom flashes every few seconds. With 2.6.3-rc3-mm1 all works just fine, and I get this syslog entry:
Feb 19 22:23:15 kefk kernel: ahc_pci:3:6:0: Host Adapter Bios disabled. Using default SCSI device parameters Feb 19 22:23:15 kefk kernel: scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 Feb 19 22:23:15 kefk kernel: <Adaptec 2902/04/10/15/20C/30C SCSI adapter> Feb 19 22:23:15 kefk kernel: aic7850: Single Channel A, SCSI Id=7,
Quoted 3 lines
3/253 SCBs
<<<<<<<<<<<<<<<2.6.3-mm1 hangs here
Are you able to get a sysrq-T or sysrq-P trace?
Quoted 2 lines
I've also noticed (only with 2.6.3-mm1) a "PCI BIOS passed non existent PCI BUS 0!" message when it probes ICH5, i.e.
Could be an acpi thing. If you have time, could you try
patch -p1 -R < bk-acpi.patch
and see if that helps?
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.3/2.6.3-mm1/broken-out/bk-acpi.patch
Thanks.
Alle 01:21, venerdì 20 febbraio 2004, Andrew Morton ha scritto:
Quoted 6 lines
Quoted 4 lines
Feb 19 22:23:15 kefk kernel: aic7850: Single Channel A, SCSIId=7, 3/253 SCBs
<<<<<<<<<<<<<<<2.6.3-mm1 hangs here
Are you able to get a sysrq-T or sysrq-P trace?
I've just tried, but the system seems completely hung. The only activity is from scsi cdrom device, that blinks a light every 20/30 seconds, more or less. Even Caps/Num/Scroll lock keyboards led are frozen.
(tried also with mm2)
Quoted 9 lines
Quoted 3 lines
I've also noticed (only with 2.6.3-mm1) a "PCI BIOS passed non existent PCI BUS 0!" message when it probes ICH5, i.e.
Could be an acpi thing. If you have time, could you try
patch -p1 -R < bk-acpi.patch
and see if that helps?
At this moment I can't reach kernel.org, some connectivity issue over the ocean, I suppose :)
I'll try again in few hours.
Signature · 4 lines
Fabio Coatti http://www.ferrara.linux.it/members/cova Ferrara Linux Users Group http://ferrara.linux.it GnuPG fp:9765 A5B6 6843 17BC A646 BE8C FA56 373A 5374 C703 Old SysOps never die... they simply forget their password.
Alle 01:21, venerdì 20 febbraio 2004, Andrew Morton ha scritto:
Quoted 8 lines
Quoted 2 lines
I've also noticed (only with 2.6.3-mm1) a "PCI BIOS passed non existent PCI BUS 0!" message when it probes ICH5, i.e.
Could be an acpi thing. If you have time, could you try
patch -p1 -R < bk-acpi.patch
and see if that helps?
Tried, the error message is disappeared (but my kernel still hangs on scsi detection, so I'm unable if this has other effects :) )
Signature · 4 lines
Fabio Coatti http://www.ferrara.linux.it/members/cova Ferrara Linux Users Group http://ferrara.linux.it GnuPG fp:9765 A5B6 6843 17BC A646 BE8C FA56 373A 5374 C703 Old SysOps never die... they simply forget their password.