ingress QoS
Hello guys,
Setup: iptables 1.2.9 (patch-o-matic not used)
linux 2.4.25 (gentoo vanilla, everything needed compiled in) eth1 -> pppoe (ppp0)
eth0
Goal: Fair queuing of incomming traffic
Story:
since I've failed to use IMQ with iptables 1.2.9 and linux 2.4.25, I've tried to attach a HTB qdisc to eth0 with a root of 100mbit and classes with rates of 100mbit and DSL downlink speed (768 kbit). The downlink class I divided into important traffic (700 kbit) and bulk (68 kbit) - both got HTB qdiscs.
The router packets with source 10.0.0.1 end up in the 100mbit queue, but I have to set this rule to prio 1 otherwise the bulk rule (src 0.0.0.0/0) will take place.
Everything is working fine so far.
Since I wanted to speed up browsing while having other downloads, packets with sport 80 are queued in the important queue.
Also I wanted to be very smart and use a transparent squid. But then I thought twice and realized, that packets with sport 80 end up in squid (except it was a direct connection), thus the packets are queued different.
Question is now: do I also have to add qdiscs to device lo, or how can I queue the router's incomming traffic for routers's local processes. If I have to add qdiscs for lo, what would be the bandwidth? And, would that be clever in general?
If someone is interessted in the script, drop a note.
Thanks in advance,
Rob
Signature · 6 lines
| Robert Felber (System-Administrator) Tel: +49 (0) 89 / 453 12-86 | | Autohaus Erich Kuttendreier Fax: +49 (0) 89 / 453 12-80 | | Drosselweg 21 PGP: 896CF30B | | 81827 Muenchen | | | | PGP-Fingerprint: CF36 AA93 9716 63E8 962F 15CC A80E 1A79 BF77 25EA |
Quoted 7 lines · Robert Felber
Hello guys,
Setup: iptables 1.2.9 (patch-o-matic not used)
linux 2.4.25 (gentoo vanilla, everything needed compiled in) eth1 -> pppoe (ppp0)
eth0
Quoted 5 lines
Goal: Fair queuing of incomming traffic
Story:
since I've failed to use IMQ with iptables 1.2.9 and linux 2.4.25,
What failed - my 2.4.24 setup may work I'll try 25 soon.
Quoted 4 lines
I've tried to attach a HTB qdisc to eth0 with a root of 100mbit and classes with rates of 100mbit and DSL downlink speed (768 kbit). The downlink class I divided into important traffic (700 kbit) and bulk (68 kbit) - both got HTB qdiscs.
You need to set limits to 80% or less - depending on number of tcps and how much you care about latency.
Quoted 13 lines
The router packets with source 10.0.0.1 end up in the 100mbit queue, but I have to set this rule to prio 1 otherwise the bulk rule (src 0.0.0.0/0) will take place.
Everything is working fine so far.
Since I wanted to speed up browsing while having other downloads, packets with sport 80 are queued in the important queue.
Also I wanted to be very smart and use a transparent squid. But then I thought twice and realized, that packets with sport 80 end up in squid (except it was a direct connection), thus the packets are queued different.
Quoted 4 lines
Question is now: do I also have to add qdiscs to device lo, or how can I queue the router's incomming traffic for routers's local processes. If I have to add qdiscs for lo, what would be the bandwidth? And, would that be clever in general?
If what you want to do is controll/share incoming DSL bandwidth for local and forwarded traffic you need to put IMQ on ppp0. I guess you don't need to throttle/priorotise squid to the LAN for stuff that's cached, but do when it's getting stuff from the net.
Andy.
Quoted 8 lines
If someone is interessted in the script, drop a note.
Thanks in advance,
Rob
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/